Poodletooth-iLand/build/nirai/panda3d/makepanda/installer.nsi

1292 lines
45 KiB
Text

; Panda3D installation script for the Nullsoft Installation System (NSIS).
; Jon Parise <jparise@cmu.edu>
; with Ben Johnson <bkj@andrew.cmu.edu>
; with Jason Pratt <pratt@andrew.cmu.edu>
; mangled by Josh Yelon <jyelon@andrew.cmu.edu>
; Heavily restructured by rdb
; Caller needs to define these variables:
;
; COMPRESSOR - either zlib or lzma
; TITLE - title (eg. "Panda3D SDK 1.9.0")
; INSTALLDIR - default install location (eg. "C:\Panda3D-1.9.0-x64")
; OUTFILE - where to put the output file (eg. "..\nsis-output.exe")
;
; BUILT - location of panda install tree.
; SOURCE - location of the panda source-tree if available, OR location of panda install tree.
; PYVER - version of Python that Panda was built with (ie, "2.7")
; PYEXTRAS - directory containing python extras, if any.
; REGVIEW - either 32 or 64, depending on the build architecture.
;
Name "${TITLE}"
InstallDir "${INSTALLDIR}"
OutFile "${OUTFILE}"
RequestExecutionLevel user
SetCompress auto
SetCompressor ${COMPRESSOR}
!include "MUI2.nsh"
!include "Sections.nsh"
!include "WinMessages.nsh"
!include "WordFunc.nsh"
!define MUI_WELCOMEFINISHPAGE_BITMAP "panda-install.bmp"
!define MUI_UNWELCOMEFINISHPAGE_BITMAP "panda-install.bmp"
!define MUI_ABORTWARNING
!define MUI_FINISHPAGE_NOREBOOTSUPPORT
!define MUI_FINISHPAGE_RUN
!define MUI_FINISHPAGE_RUN_FUNCTION runFunction
!define MUI_FINISHPAGE_RUN_TEXT "Visit the Panda3D Manual"
!insertmacro MUI_PAGE_WELCOME
!insertmacro MUI_PAGE_LICENSE "../doc/LICENSE"
!insertmacro MUI_PAGE_DIRECTORY
!define MUI_PAGE_CUSTOMFUNCTION_LEAVE ConfirmPythonSelection
!insertmacro MUI_PAGE_COMPONENTS
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_PAGE_FINISH
!insertmacro MUI_UNPAGE_WELCOME
!insertmacro MUI_UNPAGE_CONFIRM
!insertmacro MUI_UNPAGE_INSTFILES
!insertmacro MUI_UNPAGE_FINISH
!insertmacro MUI_LANGUAGE "English"
ShowInstDetails hide
ShowUninstDetails hide
LicenseData "${LICENSE}"
InstType "Full (Recommended)"
InstType "Minimal"
LangString DESC_SecCore ${LANG_ENGLISH} "The Panda3D core libraries, configuration files and models/textures that are needed to use Panda3D."
LangString DESC_SecOpenGL ${LANG_ENGLISH} "The OpenGL graphics back-end is the most well-supported renderer."
LangString DESC_SecDirect3D9 ${LANG_ENGLISH} "The optional Direct3D 9 renderer."
LangString DESC_SecOpenAL ${LANG_ENGLISH} "Support for playing audio via the OpenAL library. You need either OpenAL or FMOD to be able to play audio."
LangString DESC_SecFMOD ${LANG_ENGLISH} "Support for decoding and playing audio via the FMOD Ex library. You need either OpenAL or FMOD to be able to play audio."
LangString DESC_SecFFMpeg ${LANG_ENGLISH} "Support for decoding video and audio via the FFMpeg library. Without this option, Panda3D will only be able to play .wav and .ogg audio files."
LangString DESC_SecBullet ${LANG_ENGLISH} "Support for the Bullet physics engine."
LangString DESC_SecODE ${LANG_ENGLISH} "Support for the Open Dynamics Engine to implement physics."
LangString DESC_SecPhysX ${LANG_ENGLISH} "Support for NVIDIA PhysX to implement physics."
LangString DESC_SecRocket ${LANG_ENGLISH} "Support for the libRocket GUI library. This is an optional library that offers an HTML/CSS-like approach to creating user interfaces."
LangString DESC_SecTools ${LANG_ENGLISH} "Useful tools and model converters to help with Panda3D development. Recommended."
LangString DESC_SecPyBindings ${LANG_ENGLISH} "Contains the Python modules that allow use of Panda3D using Python. These will only work with a ${REGVIEW}-bit version of Python ${PYVER}."
LangString DESC_SecPython ${LANG_ENGLISH} "Contains a ${REGVIEW}-bit copy of Python ${PYVER} preconfigured to make use of Panda3D."
LangString DESC_SecHeadersLibs ${LANG_ENGLISH} "Headers and libraries needed for C++ development with Panda3D."
LangString DESC_SecSamples ${LANG_ENGLISH} "The sample programs demonstrate how to make Python applications with Panda3D."
LangString DESC_SecMaxPlugins ${LANG_ENGLISH} "Plug-ins for Autodesk 3ds Max (${REGVIEW}-bit) that can be used to export models to Panda3D."
LangString DESC_SecMayaPlugins ${LANG_ENGLISH} "Plug-ins and scripts for Autodesk Maya (${REGVIEW}-bit) that can be used to export models to Panda3D."
var READABLE
var MANPAGE
; See http://nsis.sourceforge.net/Check_if_a_file_exists_at_compile_time for documentation
!macro !defineifexist _VAR_NAME _FILE_NAME
!tempfile _TEMPFILE
!ifdef NSIS_WIN32_MAKENSIS
; Windows - cmd.exe
!system 'if exist "${_FILE_NAME}" echo !define ${_VAR_NAME} > "${_TEMPFILE}"'
!else
; Posix - sh
!system 'if [ -e "${_FILE_NAME}" ]; then echo "!define ${_VAR_NAME}" > "${_TEMPFILE}"; fi'
!endif
!include '${_TEMPFILE}'
!delfile '${_TEMPFILE}'
!undef _TEMPFILE
!macroend
!insertmacro !defineifexist HAVE_GL "${BUILT}\bin\libpandagl.dll"
!insertmacro !defineifexist HAVE_DX9 "${BUILT}\bin\libpandadx9.dll"
!insertmacro !defineifexist HAVE_OPENAL "${BUILT}\bin\libp3openal_audio.dll"
!insertmacro !defineifexist HAVE_FMOD "${BUILT}\bin\libp3fmod_audio.dll"
!insertmacro !defineifexist HAVE_FFMPEG "${BUILT}\bin\libp3ffmpeg.dll"
!insertmacro !defineifexist HAVE_BULLET "${BUILT}\bin\libpandabullet.dll"
!insertmacro !defineifexist HAVE_ODE "${BUILT}\bin\libpandaode.dll"
!insertmacro !defineifexist HAVE_PHYSX "${BUILT}\bin\libpandaphysx.dll"
!insertmacro !defineifexist HAVE_ROCKET "${BUILT}\bin\libp3rocket.dll"
!insertmacro !defineifexist HAVE_PYTHON "${BUILT}\python"
!insertmacro !defineifexist HAVE_SAMPLES "${SOURCE}\samples"
!insertmacro !defineifexist HAVE_MAX_PLUGINS "${BUILT}\plugins\*.dlo"
!insertmacro !defineifexist HAVE_MAYA_PLUGINS "${BUILT}\plugins\*.mll"
Function runFunction
ExecShell "open" "$SMPROGRAMS\${TITLE}\Panda3D Manual.lnk"
FunctionEnd
SectionGroup "Panda3D Libraries"
Section "Core Libraries" SecCore
SectionIn 1 2 RO
SetShellVarContext current
SetOverwrite try
SetDetailsPrint both
DetailPrint "Installing Panda3D libraries..."
SetDetailsPrint listonly
SetOutPath "$INSTDIR"
File "${BUILT}\LICENSE"
File /r /x CVS "${BUILT}\ReleaseNotes"
SetOutPath $INSTDIR\bin
File /r /x libpandagl.dll /x libpandadx9.dll /x cgD3D*.dll /x python*.dll /x libpandaode.dll /x libp3fmod_audio.dll /x fmodex*.dll /x libp3ffmpeg.dll /x av*.dll /x postproc*.dll /x swscale*.dll /x swresample*.dll /x NxCharacter*.dll /x cudart*.dll /x PhysX*.dll /x libpandaphysx.dll /x libp3rocket.dll /x boost_python*.dll /x Rocket*.dll /x _rocket*.pyd /x libpandabullet.dll /x OpenAL32.dll /x *_oal.dll /x libp3openal_audio.dll "${BUILT}\bin\*.dll"
File /nonfatal /r "${BUILT}\bin\Microsoft.*.manifest"
SetOutPath $INSTDIR\etc
File /r "${BUILT}\etc\*"
SetDetailsPrint both
DetailPrint "Installing models..."
SetDetailsPrint listonly
SetOutPath $INSTDIR\models
File /r /x CVS "${BUILT}\models\*"
RMDir /r "$SMPROGRAMS\${TITLE}"
CreateDirectory "$SMPROGRAMS\${TITLE}"
SectionEnd
!ifdef HAVE_GL
Section "OpenGL" SecOpenGL
SectionIn 1 2 RO
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libpandagl.dll"
SectionEnd
!endif
!ifdef HAVE_DX9
Section "Direct3D 9" SecDirect3D9
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libpandadx9.dll"
File /nonfatal /r "${BUILT}\bin\cgD3D9.dll"
SectionEnd
!endif
!ifdef HAVE_OPENAL
Section "OpenAL Audio" SecOpenAL
SectionIn 1 2
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libp3openal_audio.dll"
File /nonfatal /r "${BUILT}\bin\OpenAL32.dll"
File /nonfatal /r "${BUILT}\bin\*_oal.dll"
SectionEnd
!endif
!ifdef HAVE_FMOD
Section "FMOD Audio" SecFMOD
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libp3fmod_audio.dll"
File /r "${BUILT}\bin\fmodex*.dll"
SectionEnd
!endif
!ifdef HAVE_FFMPEG
Section "FFMpeg" SecFFMpeg
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libp3ffmpeg.dll"
File /nonfatal /r "${BUILT}\bin\av*.dll"
File /nonfatal /r "${BUILT}\bin\swscale*.dll"
File /nonfatal /r "${BUILT}\bin\swresample*.dll"
File /nonfatal /r "${BUILT}\bin\postproc*.dll"
SectionEnd
!endif
!ifdef HAVE_BULLET
Section "Bullet Physics" SecBullet
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libpandabullet.dll"
SectionEnd
!endif
!ifdef HAVE_ODE
Section "ODE Physics" SecODE
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libpandaode.dll"
SectionEnd
!endif
!ifdef HAVE_PHYSX
Section "NVIDIA PhysX" SecPhysX
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libpandaphysx.dll"
File /nonfatal /r "${BUILT}\bin\PhysX*.dll"
File /nonfatal /r "${BUILT}\bin\NxCharacter*.dll"
File /nonfatal /r "${BUILT}\bin\cudart*.dll"
SectionEnd
!endif
!ifdef HAVE_ROCKET
Section "libRocket GUI" SecRocket
SectionIn 1
SetOutPath "$INSTDIR\bin"
File "${BUILT}\bin\libp3rocket.dll"
File /nonfatal /r "${BUILT}\bin\Rocket*.dll"
File /nonfatal /r "${BUILT}\bin\_rocket*.pyd"
File /nonfatal /r "${BUILT}\bin\boost_python*.dll"
SectionEnd
!endif
SectionGroupEnd
Section "Tools and utilities" SecTools
SectionIn 1 2
SetDetailsPrint both
DetailPrint "Installing utilities..."
SetDetailsPrint listonly
SetOutPath "$INSTDIR\bin"
File /r "${BUILT}\bin\*.exe"
File /nonfatal /r "${BUILT}\bin\*.p3d"
SetOutPath "$INSTDIR\NSIS"
File /r /x CVS "${NSISDIR}\*"
SectionEnd
SectionGroup "Python support"
Section "Python bindings" SecPyBindings
SectionIn 1 2
SetDetailsPrint both
DetailPrint "Installing Panda3D Python modules..."
SetDetailsPrint listonly
SetOutPath "$INSTDIR\bin"
File /nonfatal /r "${BUILT}\bin\*.pyd"
SetOutPath $INSTDIR\direct\directscripts
File /r /x CVS /x Opt?-Win32 "${BUILT}\direct\directscripts\*"
SetOutPath $INSTDIR\direct\filter
File /r /x CVS /x Opt?-Win32 "${BUILT}\direct\filter\*.sha"
SetOutPath $INSTDIR\direct
File /r /x CVS /x Opt?-Win32 "${BUILT}\direct\*.py"
Delete "$INSTDIR\panda3d.py"
Delete "$INSTDIR\panda3d.pyc"
Delete "$INSTDIR\panda3d.pyo"
SetOutPath $INSTDIR\pandac
File /r "${BUILT}\pandac\*.py"
SetOutPath $INSTDIR\panda3d
File /r "${BUILT}\panda3d\*.py"
File /r /x bullet.pyd /x ode.pyd /x physx.pyd /x rocket.pyd "${BUILT}\panda3d\*.pyd"
!ifdef HAVE_BULLET
SectionGetFlags ${SecBullet} $R0
IntOp $R0 $R0 & ${SF_SELECTED}
StrCmp $R0 ${SF_SELECTED} 0 SkipBulletPyd
File /nonfatal /r "${BUILT}\panda3d\bullet.pyd"
SkipBulletPyd:
!endif
!ifdef HAVE_ODE
SectionGetFlags ${SecODE} $R0
IntOp $R0 $R0 & ${SF_SELECTED}
StrCmp $R0 ${SF_SELECTED} 0 SkipODEPyd
File /nonfatal /r "${BUILT}\panda3d\ode.pyd"
SkipODEPyd:
!endif
!ifdef HAVE_PHYSX
SectionGetFlags ${SecPhysX} $R0
IntOp $R0 $R0 & ${SF_SELECTED}
StrCmp $R0 ${SF_SELECTED} 0 SkipPhysXPyd
File /nonfatal /r "${BUILT}\panda3d\physx.pyd"
SkipPhysXPyd:
!endif
!ifdef HAVE_ROCKET
SectionGetFlags ${SecRocket} $R0
IntOp $R0 $R0 & ${SF_SELECTED}
StrCmp $R0 ${SF_SELECTED} 0 SkipRocketPyd
File /nonfatal /r "${BUILT}\panda3d\rocket.pyd"
SkipRocketPyd:
!endif
SetOutPath $INSTDIR\pandac\input
File /r "${BUILT}\pandac\input\*"
SetOutPath $INSTDIR\Pmw
File /r /x CVS "${BUILT}\Pmw\*"
!ifdef REGVIEW
SetRegView ${REGVIEW}
!endif
; Check for a system-wide Python installation.
; We could check for a user installation of Python as well, but there
; is no distinction between 64-bit and 32-bit regviews in HKCU, so we
; can't guess whether it might be a compatible version.
ReadRegStr $0 HKLM "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp $0 "$INSTDIR\python" SkipExternalPth 0
StrCmp $0 "" SkipExternalPth 0
IfFileExists "$0\ppython.exe" SkipExternalPth 0
IfFileExists "$0\python.exe" 0 SkipExternalPth
; We're pretty sure this Python build is of the right architecture.
MessageBox MB_YESNO|MB_ICONQUESTION \
"Your system already has a copy of Python ${PYVER} installed in:$\r$\n$0$\r$\nWould you like to configure it to be able to use the Panda3D libraries?$\r$\nIf you choose no, you will only be able to use Panda3D's own copy of Python." \
IDYES WriteExternalPth IDNO SkipExternalPth
WriteExternalPth:
FileOpen $1 "$0\Lib\site-packages\panda.pth" w
FileWrite $1 "$INSTDIR$\r$\n"
FileWrite $1 "$INSTDIR\bin$\r$\n"
FileClose $1
SkipExternalPth:
SectionEnd
!ifdef HAVE_PYTHON
Section "Python ${PYVER}" SecPython
SectionIn 1 2
!ifdef REGVIEW
SetRegView ${REGVIEW}
!endif
SetDetailsPrint both
DetailPrint "Installing Python ${PYVER} (${REGVIEW}-bit)..."
SetDetailsPrint listonly
SetOutPath "$INSTDIR\bin"
File /nonfatal "${BUILT}\bin\python*.dll"
SetOutPath "$INSTDIR\python"
File /r "${BUILT}\python\*"
!ifdef PYEXTRAS
SetOutPath "$INSTDIR\python\lib"
File /nonfatal /r "${PYEXTRAS}\*"
!endif
SetDetailsPrint both
DetailPrint "Adding registry keys for Python..."
SetDetailsPrint listonly
; Check if a copy of Python is installed for this user.
ReadRegStr $0 HKCU "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp "$0" "$INSTDIR\python" RegPath 0
StrCmp "$0" "" SkipFileCheck 0
IfFileExists "$0\python.exe" AskRegPath 0
SkipFileCheck:
; Check if a system-wide copy of Python is installed.
ReadRegStr $0 HKLM "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp "$0" "$INSTDIR\python" RegPath 0
StrCmp "$0" "" RegPath 0
IfFileExists "$0\python.exe" AskRegPath RegPath
AskRegPath:
MessageBox MB_YESNO|MB_ICONQUESTION \
"You already have a copy of Python ${PYVER} installed in:$\r$\n$0$\r$\n$\r$\nPanda3D installs its own copy of Python ${PYVER}, which will install alongside your existing copy. Would you like to make Panda's copy the default Python for your user account?" \
IDNO SkipRegPath
RegPath:
WriteRegStr HKCU "Software\Python\PythonCore\${PYVER}\InstallPath" "" "$INSTDIR\python"
SkipRegPath:
SectionEnd
!endif
SectionGroupEnd
Function ConfirmPythonSelection
; Check the current state of the "Python" section selection.
SectionGetFlags ${SecPython} $R0
IntOp $R1 $R0 & ${SF_SELECTED}
; Is the "Python" selection deselected?
StrCmp $R1 ${SF_SELECTED} SkipCheck 0
; Maybe the user just doesn't want Python support at all?
SectionGetFlags ${SecPyBindings} $R1
IntOp $R1 $R1 & ${SF_SELECTED}
StrCmp $R1 ${SF_SELECTED} 0 SkipCheck
!ifdef REGVIEW
SetRegView ${REGVIEW}
!endif
; Check for a user installation of Python.
ReadRegStr $0 HKCU "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp $0 "$INSTDIR\python" CheckSystemWidePython 0
StrCmp $0 "" CheckSystemWidePython 0
IfFileExists "$0\ppython.exe" CheckSystemWidePython 0
IfFileExists "$0\python.exe" SkipCheck CheckSystemWidePython
; Check for a system-wide Python installation.
CheckSystemWidePython:
ReadRegStr $0 HKLM "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp $0 "$INSTDIR\python" AskConfirmation 0
StrCmp $0 "" AskConfirmation 0
IfFileExists "$0\ppython.exe" AskConfirmation 0
IfFileExists "$0\python.exe" SkipCheck AskConfirmation
; No compatible Python version found (that wasn't shipped as part
; of a different Panda3D build.) Ask the user if he's sure about this.
AskConfirmation:
MessageBox MB_YESNO|MB_ICONQUESTION \
"You do not appear to have a ${REGVIEW}-bit version of Python ${PYVER} installed. Are you sure you don't want Panda to install a compatible copy of Python?$\r$\n$\r$\nIf you choose Yes, you will not be able to do Python development with Panda3D until you install a ${REGVIEW}-bit version of Python ${PYVER} and manually configure it to be able to use Panda3D." \
IDYES SkipCheck
; User clicked no, so re-enable the select box and abort.
IntOp $R0 $R0 | ${SF_SELECTED}
SectionSetFlags ${SecPython} $R0
Abort
SkipCheck:
FunctionEnd
Section "C++ support" SecHeadersLibs
SectionIn 1
SetDetailsPrint both
DetailPrint "Installing header files..."
SetDetailsPrint listonly
SetOutPath $INSTDIR\include
File /r /x *.exp "${BUILT}\include\*"
SetDetailsPrint both
DetailPrint "Installing library archives..."
SetDetailsPrint listonly
SetOutPath $INSTDIR\lib
File /r /x *.exp "${BUILT}\lib\*"
SectionEnd
!ifdef HAVE_SAMPLES
Section "Sample programs" SecSamples
SectionIn 1
; Necessary for proper start menu shortcut installation
SetShellVarContext current
SetDetailsPrint both
DetailPrint "Installing sample programs..."
SetDetailsPrint listonly
SetOutPath $INSTDIR\samples
File /nonfatal /r /x CVS "${SOURCE}\samples\*"
SetDetailsPrint both
DetailPrint "Creating shortcuts..."
SetDetailsPrint listonly
SetOutPath $INSTDIR
WriteINIStr $INSTDIR\Website.url "InternetShortcut" "URL" "https://www.panda3d.org/"
WriteINIStr $INSTDIR\Manual.url "InternetShortcut" "URL" "https://www.panda3d.org/manual/index.php"
WriteINIStr $INSTDIR\Samples.url "InternetShortcut" "URL" "https://www.panda3d.org/manual/index.php/Sample_Programs_in_the_Distribution"
SetOutPath $INSTDIR
CreateShortCut "$SMPROGRAMS\${TITLE}\Panda3D Manual.lnk" "$INSTDIR\Manual.url" "" "$INSTDIR\bin\eggcacher.exe" 0 "" "" "Panda3D Manual"
CreateShortCut "$SMPROGRAMS\${TITLE}\Panda3D Website.lnk" "$INSTDIR\Website.url" "" "$INSTDIR\bin\eggcacher.exe" 0 "" "" "Panda3D Website"
CreateShortCut "$SMPROGRAMS\${TITLE}\Sample Program Manual.lnk" "$INSTDIR\Samples.url" "" "$INSTDIR\bin\eggcacher.exe" 0 "" "" "Sample Program Manual"
FindFirst $0 $1 $INSTDIR\samples\*
loop:
StrCmp $1 "" done
StrCmp $1 "." next
StrCmp $1 ".." next
Push $1
Push "-"
Push " "
Call StrRep
Call Capitalize
Pop $R0
StrCpy $READABLE $R0
Push $1
Push "-"
Push "_"
Call StrRep
Pop $R0
StrCpy $MANPAGE $R0
DetailPrint "Creating shortcuts for sample program $READABLE"
CreateDirectory "$SMPROGRAMS\${TITLE}\Sample Programs\$READABLE"
SetOutPath $INSTDIR\samples\$1
WriteINIStr $INSTDIR\samples\$1\ManualPage.url "InternetShortcut" "URL" "http://panda3d.org/wiki/index.php/Sample_Programs:_$MANPAGE"
CreateShortCut "$SMPROGRAMS\${TITLE}\Sample Programs\$READABLE\Manual Page.lnk" "$INSTDIR\samples\$1\ManualPage.url" "" "$INSTDIR\bin\eggcacher.exe" 0 "" "" "Manual Entry on this Sample Program"
CreateShortCut "$SMPROGRAMS\${TITLE}\Sample Programs\$READABLE\View Source Code.lnk" "$INSTDIR\samples\$1"
FindFirst $2 $3 $INSTDIR\samples\$1\*.py
iloop:
StrCmp $3 "" idone
CreateShortCut "$SMPROGRAMS\${TITLE}\Sample Programs\$READABLE\Run $3.lnk" "$INSTDIR\python\python.exe" "-E $3" "$INSTDIR\bin\eggcacher.exe" 0 SW_SHOWMINIMIZED "" "Run $3"
CreateShortCut "$INSTDIR\samples\$1\Run $3.lnk" "$INSTDIR\python\python.exe" "-E $3" "$INSTDIR\bin\eggcacher.exe" 0 SW_SHOWMINIMIZED "" "Run $3"
FindNext $2 $3
goto iloop
idone:
next:
FindNext $0 $1
Goto loop
done:
SectionEnd
!endif
!ifdef HAVE_MAX_PLUGINS
Section "3ds Max plug-ins" SecMaxPlugins
SectionIn 1 3
SetDetailsPrint both
DetailPrint "Installing Autodesk 3ds Max plug-ins..."
SetDetailsPrint listonly
SetOutPath $INSTDIR\plugins
File /nonfatal /r "${BUILT}\plugins\*.dle"
File /nonfatal /r "${BUILT}\plugins\*.dlo"
File "${SOURCE}\doc\INSTALLING-PLUGINS.TXT"
SectionEnd
!endif
!ifdef HAVE_MAYA_PLUGINS
Section "Maya plug-ins" SecMayaPlugins
SectionIn 1 3
SetDetailsPrint both
DetailPrint "Installing Autodesk Maya plug-ins..."
SetDetailsPrint listonly
SetOutPath $INSTDIR\plugins
File /nonfatal /r "${BUILT}\plugins\*.mll"
File /nonfatal /r "${BUILT}\plugins\*.mel"
File /nonfatal /r "${BUILT}\plugins\*.ms"
File "${SOURCE}\doc\INSTALLING-PLUGINS.TXT"
SectionEnd
!endif
Section -post
!ifdef REGVIEW
SetRegView ${REGVIEW}
!endif
; Run eggcacher. We can't do this in SecCore because we haven't
; installed eggcacher at that point yet.
SetDetailsPrint both
DetailPrint "Preloading .egg files into the model cache..."
SetDetailsPrint listonly
; We need to set the $PATH for eggcacher.
SetOutPath $INSTDIR
ReadEnvStr $R0 "PATH"
StrCpy $R0 "$INSTDIR\python;$INSTDIR\bin;$R0"
System::Call 'Kernel32::SetEnvironmentVariableA(t, t) i("PATH", R0).r2'
nsExec::ExecToLog '"$INSTDIR\bin\eggcacher.exe" --concise models samples'
SetDetailsPrint both
DetailPrint "Writing the uninstaller ..."
SetDetailsPrint listonly
Delete "$INSTDIR\uninst.exe"
WriteUninstaller "$INSTDIR\uninst.exe"
WriteRegStr HKCU "Software\Microsoft\Windows\CurrentVersion\Uninstall\${TITLE}" "DisplayName" "${TITLE}"
WriteRegStr HKCU "Software\Microsoft\Windows\CurrentVersion\Uninstall\${TITLE}" "UninstallString" '"$INSTDIR\uninst.exe"'
SetOutPath $INSTDIR
CreateShortcut "$SMPROGRAMS\${TITLE}\Uninstall ${TITLE}.lnk" "$INSTDIR\uninst.exe" ""
SetDetailsPrint both
DetailPrint "Adding directories to system PATH..."
SetDetailsPrint listonly
# Add the "bin" directory to the PATH.
Push "$INSTDIR\python"
Call RemoveFromPath
Push "$INSTDIR\python\Scripts"
Call RemoveFromPath
Push "$INSTDIR\bin"
Call RemoveFromPath
Push "$INSTDIR\python"
Call AddToPath
Push "$INSTDIR\python\Scripts"
Call AddToPath
Push "$INSTDIR\bin"
Call AddToPath
# This is needed for the environment variable changes to take effect.
DetailPrint "Broadcasting WM_WININICHANGE message..."
SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=500
SectionEnd
Section Uninstall
SetDetailsPrint listonly
SetShellVarContext current
!ifdef REGVIEW
SetRegView ${REGVIEW}
!endif
SetDetailsPrint both
DetailPrint "Removing registry entries..."
SetDetailsPrint listonly
DeleteRegKey HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\${TITLE}"
DeleteRegKey HKCU "Software\Microsoft\Windows\CurrentVersion\Uninstall\${TITLE}"
ReadRegStr $0 HKLM "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp $0 "$INSTDIR\python" 0 SkipUnRegHKLM
DeleteRegKey HKLM "Software\Python\PythonCore\${PYVER}"
SkipUnRegHKLM:
ReadRegStr $0 HKCU "Software\Python\PythonCore\${PYVER}\InstallPath" ""
StrCmp $0 "$INSTDIR\python" 0 SkipUnRegHKCU
DeleteRegKey HKCU "Software\Python\PythonCore\${PYVER}"
SkipUnRegHKCU:
SetDetailsPrint both
DetailPrint "Deleting files..."
SetDetailsPrint listonly
Delete "$INSTDIR\uninst.exe"
RMDir /r "$INSTDIR"
SetDetailsPrint both
DetailPrint "Removing Start Menu entries..."
SetDetailsPrint listonly
SetShellVarContext current
RMDir /r "$SMPROGRAMS\${TITLE}"
SetShellVarContext all
RMDir /r "$SMPROGRAMS\${TITLE}"
SetDetailsPrint both
DetailPrint "Removing entries from PATH..."
SetDetailsPrint listonly
Push "$INSTDIR\python"
Call un.RemoveFromPath
Push "$INSTDIR\python\Scripts"
Call un.RemoveFromPath
Push "$INSTDIR\bin"
Call un.RemoveFromPath
# This is needed for the environment variable changes to take effect.
DetailPrint "Broadcasting WM_WININICHANGE message..."
SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=500
SectionEnd
!insertmacro MUI_FUNCTION_DESCRIPTION_BEGIN
!insertmacro MUI_DESCRIPTION_TEXT ${SecCore} $(DESC_SecCore)
!ifdef HAVE_GL
!insertmacro MUI_DESCRIPTION_TEXT ${SecOpenGL} $(DESC_SecOpenGL)
!endif
!ifdef HAVE_DX9
!insertmacro MUI_DESCRIPTION_TEXT ${SecDirect3D9} $(DESC_SecDirect3D9)
!endif
!ifdef HAVE_OPENAL
!insertmacro MUI_DESCRIPTION_TEXT ${SecOpenAL} $(DESC_SecOpenAL)
!endif
!ifdef HAVE_FMOD
!insertmacro MUI_DESCRIPTION_TEXT ${SecFMOD} $(DESC_SecFMOD)
!endif
!ifdef HAVE_FFMPEG
!insertmacro MUI_DESCRIPTION_TEXT ${SecFFMpeg} $(DESC_SecFFMpeg)
!endif
!ifdef HAVE_BULLET
!insertmacro MUI_DESCRIPTION_TEXT ${SecBullet} $(DESC_SecBullet)
!endif
!ifdef HAVE_ODE
!insertmacro MUI_DESCRIPTION_TEXT ${SecODE} $(DESC_SecODE)
!endif
!ifdef HAVE_PHYSX
!insertmacro MUI_DESCRIPTION_TEXT ${SecPhysX} $(DESC_SecPhysX)
!endif
!ifdef HAVE_ROCKET
!insertmacro MUI_DESCRIPTION_TEXT ${SecRocket} $(DESC_SecRocket)
!endif
!insertmacro MUI_DESCRIPTION_TEXT ${SecTools} $(DESC_SecTools)
!insertmacro MUI_DESCRIPTION_TEXT ${SecPyBindings} $(DESC_SecPyBindings)
!insertmacro MUI_DESCRIPTION_TEXT ${SecPython} $(DESC_SecPython)
!insertmacro MUI_DESCRIPTION_TEXT ${SecHeadersLibs} $(DESC_SecHeadersLibs)
!insertmacro MUI_DESCRIPTION_TEXT ${SecSamples} $(DESC_SecSamples)
!ifdef HAVE_MAX_PLUGINS
!insertmacro MUI_DESCRIPTION_TEXT ${SecMaxPlugins} $(DESC_SecMaxPlugins)
!endif
!ifdef HAVE_MAYA_PLUGINS
!insertmacro MUI_DESCRIPTION_TEXT ${SecMayaPlugins} $(DESC_SecMayaPlugins)
!endif
!insertmacro MUI_FUNCTION_DESCRIPTION_END
# --[ Utility Functions ]------------------------------------------------------
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
Function IsNT
Push $0
ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
StrCmp $0 "" 0 IsNT_yes
; we are not NT.
Pop $0
Push 0
Return
IsNT_yes:
; NT!!!
Pop $0
Push 1
FunctionEnd
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
Function un.IsNT
Push $0
ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
StrCmp $0 "" 0 unIsNT_yes
; we are not NT.
Pop $0
Push 0
Return
unIsNT_yes:
; NT!!!
Pop $0
Push 1
FunctionEnd
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
Function StrStr
Push $0
Exch
Pop $0 ; $0 now have the string to find
Push $1
Exch 2
Pop $1 ; $1 now have the string to find in
Exch
Push $2
Push $3
Push $4
Push $5
StrCpy $2 -1
StrLen $3 $0
StrLen $4 $1
IntOp $4 $4 - $3
unStrStr_loop:
IntOp $2 $2 + 1
IntCmp $2 $4 0 0 unStrStrReturn_notFound
StrCpy $5 $1 $3 $2
StrCmp $5 $0 unStrStr_done unStrStr_loop
unStrStrReturn_notFound:
StrCpy $2 -1
unStrStr_done:
Pop $5
Pop $4
Pop $3
Exch $2
Exch 2
Pop $0
Pop $1
FunctionEnd
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
Function un.StrStr
Push $0
Exch
Pop $0 ; $0 now have the string to find
Push $1
Exch 2
Pop $1 ; $1 now have the string to find in
Exch
Push $2
Push $3
Push $4
Push $5
StrCpy $2 -1
StrLen $3 $0
StrLen $4 $1
IntOp $4 $4 - $3
unStrStr_loop:
IntOp $2 $2 + 1
IntCmp $2 $4 0 0 unStrStrReturn_notFound
StrCpy $5 $1 $3 $2
StrCmp $5 $0 unStrStr_done unStrStr_loop
unStrStrReturn_notFound:
StrCpy $2 -1
unStrStr_done:
Pop $5
Pop $4
Pop $3
Exch $2
Exch 2
Pop $0
Pop $1
FunctionEnd
; Capitalizes the first letter of every word.
Function Capitalize
Exch $R0
Push $0
Push $1
Push $2
StrCpy $0 0
capNext:
; Grab the next character.
StrCpy $1 $R0 1 $0
StrCmp $1 '' end
; Capitalize it.
${StrFilter} '$1' '+eng' '' '' $1
${StrFilter} '$1' '+rus' '' '' $1
; Splice it into the string.
StrCpy $2 $R0 $0
IntOp $0 $0 + 1
StrCpy $R0 $R0 '' $0
StrCpy $R0 '$2$1$R0'
; Keep looping through the characters until we find a
; delimiter or reach the end of the string.
loop:
StrCpy $1 $R0 1 $0
IntOp $0 $0 + 1
StrCmp $1 '' end
StrCmp $1 ' ' capNext
StrCmp $1 '_' capNext
StrCmp $1 '-' capNext
StrCmp $1 '(' capNext
StrCmp $1 '[' capNext
Goto loop
end:
Pop $2
Pop $1
Pop $0
Exch $R0
FunctionEnd
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
; Commentary and smarter ';' checking by Jon Parise <jparise@cmu.edu>
Function AddToPath
Exch $0
Push $1
Push $2
Push $3
Call IsNT
Pop $1
DetailPrint "Adding to PATH: $0"
StrCmp $1 1 AddToPath_NT
; We're not on NT, so modify the AUTOEXEC.BAT file.
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" a
FileSeek $1 0 END
GetFullPathName /SHORT $0 $0
FileWrite $1 "$\r$\nSET PATH=%PATH%;$0$\r$\n"
FileClose $1
Goto AddToPath_done
AddToPath_NT:
ReadRegStr $1 HKCU "Environment" "PATH"
Call IsUserAdmin
Pop $3
; If this is an Admin user, use the System env. variable instead of the user's env. variable
StrCmp $3 1 0 +2
ReadRegStr $1 HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment" "PATH"
; If the PATH string is empty, jump over the mangling routines.
StrCmp $1 "" AddToPath_NTdoIt
; Pull off the last character of the PATH string. If it's a semicolon,
; we don't need to add another one, so jump to the section where we
; append the new PATH component(s).
StrCpy $2 $1 1 -1
StrCmp $2 ";" AddToPath_NTAddPath AddToPath_NTAddSemi
AddToPath_NTAddSemi:
StrCpy $1 "$1;"
Goto AddToPath_NTAddPath
AddToPath_NTAddPath:
StrCpy $0 "$1$0"
Goto AddToPath_NTdoIt
AddToPath_NTdoIt:
Call IsUserAdmin
Pop $3
StrCmp $3 1 0 NotAdmin
WriteRegExpandStr HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment" "PATH" $0
Goto AddToPath_done
NotAdmin:
WriteRegExpandStr HKCU "Environment" "PATH" $0
AddToPath_done:
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
Function RemoveFromPath
Exch $0
Push $1
Push $2
Push $3
Push $4
Push $5
Call IsNT
Pop $1
DetailPrint "Removing from PATH: $0"
StrCmp $1 1 unRemoveFromPath_NT
; Not on NT
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" r
GetTempFileName $4
FileOpen $2 $4 w
GetFullPathName /SHORT $0 $0
StrCpy $0 "SET PATH=%PATH%;$0"
SetRebootFlag true
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoop:
FileRead $1 $3
StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoop
StrCmp $3 "$0$\n" unRemoveFromPath_dosLoop
StrCmp $3 "$0" unRemoveFromPath_dosLoop
StrCmp $3 "" unRemoveFromPath_dosLoopEnd
FileWrite $2 $3
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoopEnd:
FileClose $2
FileClose $1
StrCpy $1 $WINDIR 2
Delete "$1\autoexec.bat"
CopyFiles /SILENT $4 "$1\autoexec.bat"
Delete $4
Goto unRemoveFromPath_done
unRemoveFromPath_NT:
StrLen $2 $0
Call IsUserAdmin
Pop $5
StrCmp $5 1 0 NotAdmin
ReadRegStr $1 HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment" "PATH"
Push $1
Push $0
Call StrStr ; Find $0 in $1
Pop $0 ; pos of our dir
IntCmp $0 -1 unRemoveFromPath_done
; else, it is in path
StrCpy $3 $1 $0 ; $3 now has the part of the path before our dir
IntOp $2 $2 + $0 ; $2 now contains the pos after our dir in the path (';')
IntOp $2 $2 + 1 ; $2 now containts the pos after our dir and the semicolon.
StrLen $0 $1
StrCpy $1 $1 $0 $2
StrCpy $3 "$3$1"
WriteRegExpandStr HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment" "PATH" $3
Goto unRemoveFromPath_done
NotAdmin:
ReadRegStr $1 HKCU "Environment" "PATH"
Push $1
Push $0
Call StrStr ; Find $0 in $1
Pop $0 ; pos of our dir
IntCmp $0 -1 unRemoveFromPath_done
; else, it is in path
StrCpy $3 $1 $0 ; $3 now has the part of the path before our dir
IntOp $2 $2 + $0 ; $2 now contains the pos after our dir in the path (';')
IntOp $2 $2 + 1 ; $2 now containts the pos after our dir and the semicolon.
StrLen $0 $1
StrCpy $1 $1 $0 $2
StrCpy $3 "$3$1"
WriteRegExpandStr HKCU "Environment" "PATH" $3
unRemoveFromPath_done:
Pop $5
Pop $4
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
; From: http://nsis.sourceforge.net/archive/viewpage.php?pageid=91
Function un.RemoveFromPath
Exch $0
Push $1
Push $2
Push $3
Push $4
Push $5
Call un.IsNT
Pop $1
StrCmp $1 1 unRemoveFromPath_NT
; Not on NT
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" r
GetTempFileName $4
FileOpen $2 $4 w
GetFullPathName /SHORT $0 $0
StrCpy $0 "SET PATH=%PATH%;$0"
SetRebootFlag true
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoop:
FileRead $1 $3
StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoop
StrCmp $3 "$0$\n" unRemoveFromPath_dosLoop
StrCmp $3 "$0" unRemoveFromPath_dosLoop
StrCmp $3 "" unRemoveFromPath_dosLoopEnd
FileWrite $2 $3
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoopEnd:
FileClose $2
FileClose $1
StrCpy $1 $WINDIR 2
Delete "$1\autoexec.bat"
CopyFiles /SILENT $4 "$1\autoexec.bat"
Delete $4
Goto unRemoveFromPath_done
unRemoveFromPath_NT:
StrLen $2 $0
Call un.IsUserAdmin
Pop $5
StrCmp $5 1 0 NotAdmin
ReadRegStr $1 HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment" "PATH"
Push $1
Push $0
Call un.StrStr ; Find $0 in $1
Pop $0 ; pos of our dir
IntCmp $0 -1 unRemoveFromPath_done
; else, it is in path
StrCpy $3 $1 $0 ; $3 now has the part of the path before our dir
IntOp $2 $2 + $0 ; $2 now contains the pos after our dir in the path (';')
IntOp $2 $2 + 1 ; $2 now containts the pos after our dir and the semicolon.
StrLen $0 $1
StrCpy $1 $1 $0 $2
StrCpy $3 "$3$1"
WriteRegExpandStr HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment" "PATH" $3
Goto unRemoveFromPath_done
NotAdmin:
ReadRegStr $1 HKCU "Environment" "PATH"
Push $1
Push $0
Call un.StrStr ; Find $0 in $1
Pop $0 ; pos of our dir
IntCmp $0 -1 unRemoveFromPath_done
; else, it is in path
StrCpy $3 $1 $0 ; $3 now has the part of the path before our dir
IntOp $2 $2 + $0 ; $2 now contains the pos after our dir in the path (';')
IntOp $2 $2 + 1 ; $2 now containts the pos after our dir and the semicolon.
StrLen $0 $1
StrCpy $1 $1 $0 $2
StrCpy $3 "$3$1"
WriteRegExpandStr HKCU "Environment" "PATH" $3
unRemoveFromPath_done:
Pop $5
Pop $4
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
; From: http://nsis.sourceforge.net/archive/nsisweb.php?page=329&instances=0,11
; Localized by Ben Johnson (bkj@andrew.cmu.edu)
Function IsUserAdmin
Push $0
Push $1
Push $2
Push $3
Call IsNT
Pop $1
ClearErrors
UserInfo::GetName
;IfErrors Win9x
Pop $2
UserInfo::GetAccountType
Pop $3
; Compare results of IsNT with "1"
StrCmp $1 1 0 NotNT
;This is NT
StrCmp $3 "Admin" 0 NotAdmin
; Observation: I get here when running Win98SE. (Lilla)
; The functions UserInfo.dll looks for are there on Win98 too,
; but just don't work. So UserInfo.dll, knowing that admin isn't required
; on Win98, returns admin anyway. (per kichik)
; MessageBox MB_OK 'User "$R1" is in the Administrators group'
Pop $3
Pop $2
Pop $1
Pop $0
Push 1
Return
NotAdmin:
; You should still check for an empty string because the functions
; UserInfo.dll looks for may not be present on Windows 95. (per kichik)
#StrCmp $2 "" Win9x
#StrCpy $0 0
;MessageBox MB_OK 'User "$2" is in the "$3" group'
Pop $3
Pop $2
Pop $1
Pop $0
Push 0
Return
;Because we use IsNT, this is redundant.
#Win9x:
# ; comment/message below is by UserInfo.nsi author:
# ; This one means you don't need to care about admin or
# ; not admin because Windows 9x doesn't either
# ;MessageBox MB_OK "Error! This DLL can't run under Windows 9x!"
# StrCpy $0 0
NotNT:
;We are not NT
;Win9x doesn't have "admin" users.
;Let the user do whatever.
Pop $3
Pop $2
Pop $1
Pop $0
Push 1
FunctionEnd
Function un.IsUserAdmin
Push $0
Push $1
Push $2
Push $3
Call un.IsNT
Pop $1
ClearErrors
UserInfo::GetName
;IfErrors Win9x
Pop $2
UserInfo::GetAccountType
Pop $3
; Compare results of IsNT with "1"
StrCmp $1 1 0 NotNT
;This is NT
StrCmp $3 "Admin" 0 NotAdmin
; Observation: I get here when running Win98SE. (Lilla)
; The functions UserInfo.dll looks for are there on Win98 too,
; but just don't work. So UserInfo.dll, knowing that admin isn't required
; on Win98, returns admin anyway. (per kichik)
; MessageBox MB_OK 'User "$R1" is in the Administrators group'
Pop $3
Pop $2
Pop $1
Pop $0
Push 1
Return
NotAdmin:
; You should still check for an empty string because the functions
; UserInfo.dll looks for may not be present on Windows 95. (per kichik)
#StrCmp $2 "" Win9x
#StrCpy $0 0
;MessageBox MB_OK 'User "$2" is in the "$3" group'
Pop $3
Pop $2
Pop $1
Pop $0
Push 0
Return
;Because we use IsNT, this is redundant.
#Win9x:
# ; comment/message below is by UserInfo.nsi author:
# ; This one means you don't need to care about admin or
# ; not admin because Windows 9x doesn't either
# ;MessageBox MB_OK "Error! This DLL can't run under Windows 9x!"
# StrCpy $0 0
NotNT:
;We are not NT
;Win9x doesn't have "admin" users.
;Let the user do whatever.
Pop $3
Pop $2
Pop $1
Pop $0
Push 1
FunctionEnd
Function StrRep
;Written by dirtydingus 2003-02-20 04:30:09
; USAGE
;Push String to do replacement in (haystack)
;Push String to replace (needle)
;Push Replacement
;Call StrRep
;Pop $R0 result
;StrCpy $Result STR $R0
Exch $R4 ; $R4 = Replacement String
Exch
Exch $R3 ; $R3 = String to replace (needle)
Exch 2
Exch $R1 ; $R1 = String to do replacement in (haystack)
Push $R2 ; Replaced haystack
Push $R5 ; Len (needle)
Push $R6 ; len (haystack)
Push $R7 ; Scratch reg
StrCpy $R2 ""
StrLen $R5 $R3
StrLen $R6 $R1
loop:
StrCpy $R7 $R1 $R5
StrCmp $R7 $R3 found
StrCpy $R7 $R1 1 ; - optimization can be removed if U know len needle=1
StrCpy $R2 "$R2$R7"
StrCpy $R1 $R1 $R6 1
StrCmp $R1 "" done loop
found:
StrCpy $R2 "$R2$R4"
StrCpy $R1 $R1 $R6 $R5
StrCmp $R1 "" done loop
done:
StrCpy $R3 $R2
Pop $R7
Pop $R6
Pop $R5
Pop $R2
Pop $R1
Pop $R4
Exch $R3
FunctionEnd