gems-kernel/source/THIRDPARTY/xnu/bsd/sys/ulock.h
2024-06-03 11:29:39 -05:00

154 lines
5.1 KiB
C

/*
* Copyright (c) 2015 Apple Inc. All rights reserved.
*
* @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
* This file contains Original Code and/or Modifications of Original Code
* as defined in and that are subject to the Apple Public Source License
* Version 2.0 (the 'License'). You may not use this file except in
* compliance with the License. The rights granted to you under the License
* may not be used to create, or enable the creation or redistribution of,
* unlawful or unlicensed copies of an Apple operating system, or to
* circumvent, violate, or enable the circumvention or violation of, any
* terms of an Apple operating system software license agreement.
*
* Please obtain a copy of the License at
* http://www.opensource.apple.com/apsl/ and read it before using this file.
*
* The Original Code and all software distributed under the License are
* distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
* INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
* Please see the License for the specific language governing rights and
* limitations under the License.
*
* @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
#ifndef _SYS_ULOCK_H
#define _SYS_ULOCK_H
#include <mach/mach_port.h>
#include <sys/cdefs.h>
#include <stdint.h>
__BEGIN_DECLS
#if PRIVATE
#ifdef XNU_KERNEL_PRIVATE
extern mach_port_name_t ipc_entry_name_mask(mach_port_name_t name);
static __inline mach_port_name_t
ulock_owner_value_to_port_name(uint32_t uval)
{
/*
* userland uses the least significant bits for flags as these are
* never used in the mach port name, and are generally always set by
* the ipc_entry code in the kernel. Here we reconstruct a mach port
* name that we can use in the kernel.
*/
return ipc_entry_name_mask((mach_port_name_t)uval);
}
extern int ulock_wake(struct task *task, uint32_t operation, user_addr_t addr, uint64_t wake_value);
#else
static __inline mach_port_name_t
ulock_owner_value_to_port_name(uint32_t uval)
{
return uval | 0x3;
}
#endif
#ifndef KERNEL
/* timeout is specified in microseconds */
extern int __ulock_wait(uint32_t operation, void *addr, uint64_t value,
uint32_t timeout);
/* timeout is either a delta specified in nanoseconds or a deadline in
* mach_absolute_time units specified together with the ULF_DEADLINE flag */
extern int __ulock_wait2(uint32_t operation, void *addr, uint64_t value,
uint64_t timeout, uint64_t value2);
extern int __ulock_wake(uint32_t operation, void *addr, uint64_t wake_value);
#endif /* !KERNEL */
/*
* operation bits [7, 0] contain the operation code.
*
* NOTE: make sure to add logic for handling any new
* types to kdp_ulock_find_owner()
*/
#define UL_COMPARE_AND_WAIT 1
#define UL_UNFAIR_LOCK 2
#define UL_COMPARE_AND_WAIT_SHARED 3
#define UL_UNFAIR_LOCK64_SHARED 4
#define UL_COMPARE_AND_WAIT64 5
#define UL_COMPARE_AND_WAIT64_SHARED 6
/* obsolete names */
#define UL_OSSPINLOCK UL_COMPARE_AND_WAIT
#define UL_HANDOFFLOCK UL_UNFAIR_LOCK
/* These operation code are only implemented in (DEVELOPMENT || DEBUG) kernels */
#define UL_DEBUG_SIMULATE_COPYIN_FAULT 253
#define UL_DEBUG_HASH_DUMP_ALL 254
#define UL_DEBUG_HASH_DUMP_PID 255
/*
* operation bits [15, 8] contain the flags for __ulock_wake
*/
#define ULF_WAKE_ALL 0x00000100
#define ULF_WAKE_THREAD 0x00000200
#define ULF_WAKE_ALLOW_NON_OWNER 0x00000400
/*
* operation bits [23, 16] contain the flags for __ulock_wait
*
* @const ULF_WAIT_WORKQ_DATA_CONTENTION
* The waiter is contending on this lock for synchronization around global data.
* This causes the workqueue subsystem to not create new threads to offset for
* waiters on this lock.
*
* @const ULF_WAIT_CANCEL_POINT
* This wait is a cancelation point
*
* @const ULF_WAIT_ADAPTIVE_SPIN
* Use adaptive spinning when the thread that currently holds the unfair lock
* is on core.
*/
#define ULF_WAIT_WORKQ_DATA_CONTENTION 0x00010000
#define ULF_WAIT_CANCEL_POINT 0x00020000
#define ULF_WAIT_ADAPTIVE_SPIN 0x00040000
/*
* operation bits [31, 24] contain the generic flags
*
* @const ULF_DEADLINE
* put timeout - if specified - is a deadline specified in mach absolute
* time units
*/
#define ULF_NO_ERRNO 0x01000000
#define ULF_DEADLINE 0x02000000
/*
* masks
*/
#define UL_OPCODE_MASK 0x000000FF
#define UL_FLAGS_MASK 0xFFFFFF00
#define ULF_GENERIC_MASK 0xFFFF0000
#define ULF_WAIT_MASK (ULF_NO_ERRNO | ULF_DEADLINE | \
ULF_WAIT_WORKQ_DATA_CONTENTION | \
ULF_WAIT_CANCEL_POINT | ULF_WAIT_ADAPTIVE_SPIN)
#define ULF_WAKE_MASK (ULF_NO_ERRNO | \
ULF_WAKE_ALL | \
ULF_WAKE_THREAD | \
ULF_WAKE_ALLOW_NON_OWNER)
#endif /* PRIVATE */
__END_DECLS
#endif