521 lines
14 KiB
C
521 lines
14 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Address map functions for Marvell EBU SoCs (Kirkwood, Armada
|
||
|
* 370/XP, Dove, Orion5x and MV78xx0)
|
||
|
*
|
||
|
* Ported from the Barebox version to U-Boot by:
|
||
|
* Stefan Roese <sr@denx.de>
|
||
|
*
|
||
|
* The Barebox version is:
|
||
|
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
||
|
*
|
||
|
* based on mbus driver from Linux
|
||
|
* (C) Copyright 2008 Marvell Semiconductor
|
||
|
*
|
||
|
* The Marvell EBU SoCs have a configurable physical address space:
|
||
|
* the physical address at which certain devices (PCIe, NOR, NAND,
|
||
|
* etc.) sit can be configured. The configuration takes place through
|
||
|
* two sets of registers:
|
||
|
*
|
||
|
* - One to configure the access of the CPU to the devices. Depending
|
||
|
* on the families, there are between 8 and 20 configurable windows,
|
||
|
* each can be use to create a physical memory window that maps to a
|
||
|
* specific device. Devices are identified by a tuple (target,
|
||
|
* attribute).
|
||
|
*
|
||
|
* - One to configure the access to the CPU to the SDRAM. There are
|
||
|
* either 2 (for Dove) or 4 (for other families) windows to map the
|
||
|
* SDRAM into the physical address space.
|
||
|
*
|
||
|
* This driver:
|
||
|
*
|
||
|
* - Reads out the SDRAM address decoding windows at initialization
|
||
|
* time, and fills the mbus_dram_info structure with these
|
||
|
* informations. The exported function mv_mbus_dram_info() allow
|
||
|
* device drivers to get those informations related to the SDRAM
|
||
|
* address decoding windows. This is because devices also have their
|
||
|
* own windows (configured through registers that are part of each
|
||
|
* device register space), and therefore the drivers for Marvell
|
||
|
* devices have to configure those device -> SDRAM windows to ensure
|
||
|
* that DMA works properly.
|
||
|
*
|
||
|
* - Provides an API for platform code or device drivers to
|
||
|
* dynamically add or remove address decoding windows for the CPU ->
|
||
|
* device accesses. This API is mvebu_mbus_add_window_by_id(),
|
||
|
* mvebu_mbus_add_window_remap_by_id() and
|
||
|
* mvebu_mbus_del_window().
|
||
|
*/
|
||
|
|
||
|
#include <common.h>
|
||
|
#include <linux/errno.h>
|
||
|
#include <asm/io.h>
|
||
|
#include <asm/arch/cpu.h>
|
||
|
#include <asm/arch/soc.h>
|
||
|
#include <linux/log2.h>
|
||
|
#include <linux/mbus.h>
|
||
|
|
||
|
/* DDR target is the same on all platforms */
|
||
|
#define TARGET_DDR 0
|
||
|
|
||
|
/* CPU Address Decode Windows registers */
|
||
|
#define WIN_CTRL_OFF 0x0000
|
||
|
#define WIN_CTRL_ENABLE BIT(0)
|
||
|
#define WIN_CTRL_TGT_MASK 0xf0
|
||
|
#define WIN_CTRL_TGT_SHIFT 4
|
||
|
#define WIN_CTRL_ATTR_MASK 0xff00
|
||
|
#define WIN_CTRL_ATTR_SHIFT 8
|
||
|
#define WIN_CTRL_SIZE_MASK 0xffff0000
|
||
|
#define WIN_CTRL_SIZE_SHIFT 16
|
||
|
#define WIN_BASE_OFF 0x0004
|
||
|
#define WIN_BASE_LOW 0xffff0000
|
||
|
#define WIN_BASE_HIGH 0xf
|
||
|
#define WIN_REMAP_LO_OFF 0x0008
|
||
|
#define WIN_REMAP_LOW 0xffff0000
|
||
|
#define WIN_REMAP_HI_OFF 0x000c
|
||
|
|
||
|
#define ATTR_HW_COHERENCY (0x1 << 4)
|
||
|
|
||
|
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
|
||
|
#define DDR_BASE_CS_HIGH_MASK 0xf
|
||
|
#define DDR_BASE_CS_LOW_MASK 0xff000000
|
||
|
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
|
||
|
#define DDR_SIZE_ENABLED BIT(0)
|
||
|
#define DDR_SIZE_CS_MASK 0x1c
|
||
|
#define DDR_SIZE_CS_SHIFT 2
|
||
|
#define DDR_SIZE_MASK 0xff000000
|
||
|
|
||
|
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
|
||
|
|
||
|
struct mvebu_mbus_state;
|
||
|
|
||
|
struct mvebu_mbus_soc_data {
|
||
|
unsigned int num_wins;
|
||
|
unsigned int num_remappable_wins;
|
||
|
unsigned int (*win_cfg_offset)(const int win);
|
||
|
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
|
||
|
};
|
||
|
|
||
|
struct mvebu_mbus_state mbus_state
|
||
|
__attribute__ ((section(".data")));
|
||
|
static struct mbus_dram_target_info mbus_dram_info
|
||
|
__attribute__ ((section(".data")));
|
||
|
|
||
|
/*
|
||
|
* Functions to manipulate the address decoding windows
|
||
|
*/
|
||
|
|
||
|
static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
|
||
|
int win, int *enabled, u64 *base,
|
||
|
u32 *size, u8 *target, u8 *attr,
|
||
|
u64 *remap)
|
||
|
{
|
||
|
void __iomem *addr = mbus->mbuswins_base +
|
||
|
mbus->soc->win_cfg_offset(win);
|
||
|
u32 basereg = readl(addr + WIN_BASE_OFF);
|
||
|
u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
|
||
|
|
||
|
if (!(ctrlreg & WIN_CTRL_ENABLE)) {
|
||
|
*enabled = 0;
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
*enabled = 1;
|
||
|
*base = ((u64)basereg & WIN_BASE_HIGH) << 32;
|
||
|
*base |= (basereg & WIN_BASE_LOW);
|
||
|
*size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
|
||
|
|
||
|
if (target)
|
||
|
*target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
|
||
|
|
||
|
if (attr)
|
||
|
*attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
|
||
|
|
||
|
if (remap) {
|
||
|
if (win < mbus->soc->num_remappable_wins) {
|
||
|
u32 remap_low = readl(addr + WIN_REMAP_LO_OFF);
|
||
|
u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF);
|
||
|
*remap = ((u64)remap_hi << 32) | remap_low;
|
||
|
} else {
|
||
|
*remap = 0;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
|
||
|
int win)
|
||
|
{
|
||
|
void __iomem *addr;
|
||
|
|
||
|
addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
|
||
|
|
||
|
writel(0, addr + WIN_BASE_OFF);
|
||
|
writel(0, addr + WIN_CTRL_OFF);
|
||
|
if (win < mbus->soc->num_remappable_wins) {
|
||
|
writel(0, addr + WIN_REMAP_LO_OFF);
|
||
|
writel(0, addr + WIN_REMAP_HI_OFF);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Checks whether the given window number is available */
|
||
|
static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
|
||
|
const int win)
|
||
|
{
|
||
|
void __iomem *addr = mbus->mbuswins_base +
|
||
|
mbus->soc->win_cfg_offset(win);
|
||
|
u32 ctrl = readl(addr + WIN_CTRL_OFF);
|
||
|
return !(ctrl & WIN_CTRL_ENABLE);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Checks whether the given (base, base+size) area doesn't overlap an
|
||
|
* existing region
|
||
|
*/
|
||
|
static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
|
||
|
phys_addr_t base, size_t size,
|
||
|
u8 target, u8 attr)
|
||
|
{
|
||
|
u64 end = (u64)base + size;
|
||
|
int win;
|
||
|
|
||
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
||
|
u64 wbase, wend;
|
||
|
u32 wsize;
|
||
|
u8 wtarget, wattr;
|
||
|
int enabled;
|
||
|
|
||
|
mvebu_mbus_read_window(mbus, win,
|
||
|
&enabled, &wbase, &wsize,
|
||
|
&wtarget, &wattr, NULL);
|
||
|
|
||
|
if (!enabled)
|
||
|
continue;
|
||
|
|
||
|
wend = wbase + wsize;
|
||
|
|
||
|
/*
|
||
|
* Check if the current window overlaps with the
|
||
|
* proposed physical range
|
||
|
*/
|
||
|
if ((u64)base < wend && end > wbase)
|
||
|
return 0;
|
||
|
|
||
|
/*
|
||
|
* Check if target/attribute conflicts
|
||
|
*/
|
||
|
if (target == wtarget && attr == wattr)
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
|
||
|
phys_addr_t base, size_t size)
|
||
|
{
|
||
|
int win;
|
||
|
|
||
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
||
|
u64 wbase;
|
||
|
u32 wsize;
|
||
|
int enabled;
|
||
|
|
||
|
mvebu_mbus_read_window(mbus, win,
|
||
|
&enabled, &wbase, &wsize,
|
||
|
NULL, NULL, NULL);
|
||
|
|
||
|
if (!enabled)
|
||
|
continue;
|
||
|
|
||
|
if (base == wbase && size == wsize)
|
||
|
return win;
|
||
|
}
|
||
|
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
|
||
|
int win, phys_addr_t base, size_t size,
|
||
|
phys_addr_t remap, u8 target,
|
||
|
u8 attr)
|
||
|
{
|
||
|
void __iomem *addr = mbus->mbuswins_base +
|
||
|
mbus->soc->win_cfg_offset(win);
|
||
|
u32 ctrl, remap_addr;
|
||
|
|
||
|
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
|
||
|
(attr << WIN_CTRL_ATTR_SHIFT) |
|
||
|
(target << WIN_CTRL_TGT_SHIFT) |
|
||
|
WIN_CTRL_ENABLE;
|
||
|
|
||
|
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
|
||
|
writel(ctrl, addr + WIN_CTRL_OFF);
|
||
|
if (win < mbus->soc->num_remappable_wins) {
|
||
|
if (remap == MVEBU_MBUS_NO_REMAP)
|
||
|
remap_addr = base;
|
||
|
else
|
||
|
remap_addr = remap;
|
||
|
writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF);
|
||
|
writel(0, addr + WIN_REMAP_HI_OFF);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
|
||
|
phys_addr_t base, size_t size,
|
||
|
phys_addr_t remap, u8 target,
|
||
|
u8 attr)
|
||
|
{
|
||
|
int win;
|
||
|
|
||
|
if (remap == MVEBU_MBUS_NO_REMAP) {
|
||
|
for (win = mbus->soc->num_remappable_wins;
|
||
|
win < mbus->soc->num_wins; win++)
|
||
|
if (mvebu_mbus_window_is_free(mbus, win))
|
||
|
return mvebu_mbus_setup_window(mbus, win, base,
|
||
|
size, remap,
|
||
|
target, attr);
|
||
|
}
|
||
|
|
||
|
|
||
|
for (win = 0; win < mbus->soc->num_wins; win++)
|
||
|
if (mvebu_mbus_window_is_free(mbus, win))
|
||
|
return mvebu_mbus_setup_window(mbus, win, base, size,
|
||
|
remap, target, attr);
|
||
|
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* SoC-specific functions and definitions
|
||
|
*/
|
||
|
|
||
|
static unsigned int armada_370_xp_mbus_win_offset(int win)
|
||
|
{
|
||
|
/* The register layout is a bit annoying and the below code
|
||
|
* tries to cope with it.
|
||
|
* - At offset 0x0, there are the registers for the first 8
|
||
|
* windows, with 4 registers of 32 bits per window (ctrl,
|
||
|
* base, remap low, remap high)
|
||
|
* - Then at offset 0x80, there is a hole of 0x10 bytes for
|
||
|
* the internal registers base address and internal units
|
||
|
* sync barrier register.
|
||
|
* - Then at offset 0x90, there the registers for 12
|
||
|
* windows, with only 2 registers of 32 bits per window
|
||
|
* (ctrl, base).
|
||
|
*/
|
||
|
if (win < 8)
|
||
|
return win << 4;
|
||
|
else
|
||
|
return 0x90 + ((win - 8) << 3);
|
||
|
}
|
||
|
|
||
|
static unsigned int orion5x_mbus_win_offset(int win)
|
||
|
{
|
||
|
return win << 4;
|
||
|
}
|
||
|
|
||
|
static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
|
||
|
{
|
||
|
int i;
|
||
|
int cs;
|
||
|
|
||
|
mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
|
||
|
|
||
|
for (i = 0, cs = 0; i < 4; i++) {
|
||
|
u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
|
||
|
u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
|
||
|
|
||
|
/*
|
||
|
* We only take care of entries for which the chip
|
||
|
* select is enabled, and that don't have high base
|
||
|
* address bits set (devices can only access the first
|
||
|
* 32 bits of the memory).
|
||
|
*/
|
||
|
if ((size & DDR_SIZE_ENABLED) &&
|
||
|
!(base & DDR_BASE_CS_HIGH_MASK)) {
|
||
|
struct mbus_dram_window *w;
|
||
|
|
||
|
w = &mbus_dram_info.cs[cs++];
|
||
|
w->cs_index = i;
|
||
|
w->mbus_attr = 0xf & ~(1 << i);
|
||
|
w->base = base & DDR_BASE_CS_LOW_MASK;
|
||
|
w->size = (size | ~DDR_SIZE_MASK) + 1;
|
||
|
}
|
||
|
}
|
||
|
mbus_dram_info.num_cs = cs;
|
||
|
}
|
||
|
|
||
|
static const struct mvebu_mbus_soc_data
|
||
|
armada_370_xp_mbus_data __maybe_unused = {
|
||
|
.num_wins = 20,
|
||
|
.num_remappable_wins = 8,
|
||
|
.win_cfg_offset = armada_370_xp_mbus_win_offset,
|
||
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
||
|
};
|
||
|
|
||
|
static const struct mvebu_mbus_soc_data
|
||
|
kirkwood_mbus_data __maybe_unused = {
|
||
|
.num_wins = 8,
|
||
|
.num_remappable_wins = 4,
|
||
|
.win_cfg_offset = orion5x_mbus_win_offset,
|
||
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Public API of the driver
|
||
|
*/
|
||
|
const struct mbus_dram_target_info *mvebu_mbus_dram_info(void)
|
||
|
{
|
||
|
return &mbus_dram_info;
|
||
|
}
|
||
|
|
||
|
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
|
||
|
unsigned int attribute,
|
||
|
phys_addr_t base, size_t size,
|
||
|
phys_addr_t remap)
|
||
|
{
|
||
|
struct mvebu_mbus_state *s = &mbus_state;
|
||
|
|
||
|
if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
|
||
|
printf("Cannot add window '%x:%x', conflicts with another window\n",
|
||
|
target, attribute);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
|
||
|
}
|
||
|
|
||
|
int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
|
||
|
phys_addr_t base, size_t size)
|
||
|
{
|
||
|
return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
|
||
|
size, MVEBU_MBUS_NO_REMAP);
|
||
|
}
|
||
|
|
||
|
int mvebu_mbus_del_window(phys_addr_t base, size_t size)
|
||
|
{
|
||
|
int win;
|
||
|
|
||
|
win = mvebu_mbus_find_window(&mbus_state, base, size);
|
||
|
if (win < 0)
|
||
|
return win;
|
||
|
|
||
|
mvebu_mbus_disable_window(&mbus_state, win);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void mvebu_mbus_get_lowest_base(struct mvebu_mbus_state *mbus,
|
||
|
phys_addr_t *base)
|
||
|
{
|
||
|
int win;
|
||
|
*base = 0xffffffff;
|
||
|
|
||
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
||
|
u64 wbase;
|
||
|
u32 wsize;
|
||
|
u8 wtarget, wattr;
|
||
|
int enabled;
|
||
|
|
||
|
mvebu_mbus_read_window(mbus, win,
|
||
|
&enabled, &wbase, &wsize,
|
||
|
&wtarget, &wattr, NULL);
|
||
|
|
||
|
if (!enabled)
|
||
|
continue;
|
||
|
|
||
|
if (wbase < *base)
|
||
|
*base = wbase;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void mvebu_config_mbus_bridge(struct mvebu_mbus_state *mbus)
|
||
|
{
|
||
|
phys_addr_t base;
|
||
|
u32 val;
|
||
|
u32 size;
|
||
|
|
||
|
/* Set MBUS bridge base/ctrl */
|
||
|
mvebu_mbus_get_lowest_base(&mbus_state, &base);
|
||
|
|
||
|
size = 0xffffffff - base + 1;
|
||
|
if (!is_power_of_2(size)) {
|
||
|
/* Round up to next power of 2 */
|
||
|
size = 1 << (ffs(base) + 1);
|
||
|
base = 0xffffffff - size + 1;
|
||
|
}
|
||
|
|
||
|
/* Now write base and size */
|
||
|
writel(base, MBUS_BRIDGE_WIN_BASE_REG);
|
||
|
/* Align window size to 64KiB */
|
||
|
val = (size / (64 << 10)) - 1;
|
||
|
writel((val << 16) | 0x1, MBUS_BRIDGE_WIN_CTRL_REG);
|
||
|
}
|
||
|
|
||
|
int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
|
||
|
u32 base, u32 size, u8 target, u8 attr)
|
||
|
{
|
||
|
if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
|
||
|
printf("Cannot add window '%04x:%04x', conflicts with another window\n",
|
||
|
target, attr);
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* In U-Boot we first try to add the mbus window to the remap windows.
|
||
|
* If this fails, lets try to add the windows to the non-remap windows.
|
||
|
*/
|
||
|
if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) {
|
||
|
if (mvebu_mbus_alloc_window(mbus, base, size,
|
||
|
MVEBU_MBUS_NO_REMAP, target, attr))
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Re-configure the mbus bridge registers each time this function
|
||
|
* is called. Since it may get called from the board code in
|
||
|
* later boot stages as well.
|
||
|
*/
|
||
|
mvebu_config_mbus_bridge(mbus);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mvebu_mbus_probe(struct mbus_win windows[], int count)
|
||
|
{
|
||
|
int win;
|
||
|
int ret;
|
||
|
int i;
|
||
|
|
||
|
#if defined(CONFIG_KIRKWOOD)
|
||
|
mbus_state.soc = &kirkwood_mbus_data;
|
||
|
#endif
|
||
|
#if defined(CONFIG_ARCH_MVEBU)
|
||
|
mbus_state.soc = &armada_370_xp_mbus_data;
|
||
|
#endif
|
||
|
|
||
|
mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE;
|
||
|
mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE;
|
||
|
|
||
|
for (win = 0; win < mbus_state.soc->num_wins; win++)
|
||
|
mvebu_mbus_disable_window(&mbus_state, win);
|
||
|
|
||
|
mbus_state.soc->setup_cpu_target(&mbus_state);
|
||
|
|
||
|
/* Setup statically declared windows in the DT */
|
||
|
for (i = 0; i < count; i++) {
|
||
|
u32 base, size;
|
||
|
u8 target, attr;
|
||
|
|
||
|
target = windows[i].target;
|
||
|
attr = windows[i].attr;
|
||
|
base = windows[i].base;
|
||
|
size = windows[i].size;
|
||
|
ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|