from panda3d.core import *


class Rope(NodePath):
    """
    This class defines a NURBS curve whose control vertices are
    defined based on points relative to one or more nodes in space, so
    that the "rope" will animate as the nodes move around.  It uses
    the C++ RopeNode class to achieve fancy rendering effects like
    thick lines built from triangle strips.
    """

    showRope = ConfigVariableBool('show-rope', True, \
      "Set this to false to deactivate the display of ropes.")

    def __init__(self, name = 'Rope'):
        self.ropeNode = RopeNode(name)
        self.curve = NurbsCurveEvaluator()
        self.ropeNode.setCurve(self.curve)
        NodePath.__init__(self, self.ropeNode)
        self.name = name
        self.order = 0
        self.verts = []
        self.knots = None

    def setup(self, order, verts, knots = None):
        """This must be called to define the shape of the curve
        initially, and may be called again as needed to adjust the
        curve's properties.

        order must be either 1, 2, 3, or 4, and is one more than the
        degree of the curve; most NURBS curves are order 4.

        verts is a list of (NodePath, point) tuples, defining the
        control vertices of the curve.  For each control vertex, the
        NodePath may refer to an arbitrary node in the scene graph,
        indicating the point should be interpreted in the coordinate
        space of that node (and it will automatically move when the
        node is moved), or it may be the empty NodePath or None to
        indicate the point should be interpreted in the coordinate
        space of the Rope itself.  Each point value may be either a
        3-tuple or a 4-tuple (or a VBase3 or VBase4).  If it is a
        3-component vector, it represents a 3-d point in space; a
        4-component vector represents a point in 4-d homogeneous
        space; that is to say, a 3-d point and an additional weight
        factor (which should have been multiplied into the x y z
        components).

        verts may be a list of dictionaries instead of a list of
        tuples.  In this case, each vertex dictionary may have any of
        the following elements:

          'node' : the NodePath indicating the coordinate space
          'point' : the 3-D point relative to the node; default (0, 0, 0)
          'color' : the color of the vertex, default (1, 1, 1, 1)
          'thickness' : the thickness at the vertex, default 1

        In order to enable the per-vertex color or thickness, you must
        call rope.ropeNode.setUseVertexColor(1) or
        rope.ropeNode.setUseVertexThickness(1).

        knots is optional.  If specified, it should be a list of
        floats, and should be of length len(verts) + order.  If it
        is omitted, a default knot string is generated that consists
        of the first (order - 1) and last (order - 1) values the
        same, and the intermediate values incrementing by 1.
        """

        self.order = order
        self.verts = verts
        self.knots = knots

        self.recompute()

    def recompute(self):
        """Recomputes the curve after its properties have changed.
        Normally it is not necessary for the user to call this
        directly."""

        if not self.showRope:
            return
        numVerts = len(self.verts)
        self.curve.reset(numVerts)
        self.curve.setOrder(self.order)

        defaultNodePath = None
        defaultPoint = (0, 0, 0)
        defaultColor = (1, 1, 1, 1)
        defaultThickness = 1

        useVertexColor = self.ropeNode.getUseVertexColor()
        useVertexThickness = self.ropeNode.getUseVertexThickness()

        vcd = self.ropeNode.getVertexColorDimension()
        vtd = self.ropeNode.getVertexThicknessDimension()

        for i in range(numVerts):
            v = self.verts[i]
            if isinstance(v, tuple):
                nodePath, point = v
                color = defaultColor
                thickness = defaultThickness
            else:
                nodePath = v.get('node', defaultNodePath)
                point = v.get('point', defaultPoint)
                color = v.get('color', defaultColor)
                thickness = v.get('thickness', defaultThickness)

            if isinstance(point, tuple):
                if (len(point) >= 4):
                    self.curve.setVertex(i, VBase4(point[0], point[1], point[2], point[3]))
                else:
                    self.curve.setVertex(i, VBase3(point[0], point[1], point[2]))
            else:
                self.curve.setVertex(i, point)
            if nodePath:
                self.curve.setVertexSpace(i, nodePath)
            if useVertexColor:
                self.curve.setExtendedVertex(i, vcd + 0, color[0])
                self.curve.setExtendedVertex(i, vcd + 1, color[1])
                self.curve.setExtendedVertex(i, vcd + 2, color[2])
                self.curve.setExtendedVertex(i, vcd + 3, color[3])
            if useVertexThickness:
                self.curve.setExtendedVertex(i, vtd, thickness)

        if self.knots != None:
            for i in range(len(self.knots)):
                self.curve.setKnot(i, self.knots[i])

        self.ropeNode.resetBound(self)

    def getPoints(self, len):
        """Returns a list of len points, evenly distributed in
        parametric space on the rope, in the coordinate space of the
        Rope itself."""

        result = self.curve.evaluate(self)
        startT = result.getStartT()
        sizeT = result.getEndT() - startT

        numPts = len
        ropePts = []
        for i in range(numPts):
            pt = Point3()
            result.evalPoint(sizeT * i / float(numPts - 1) + startT, pt)
            ropePts.append(pt)
        return ropePts