55 lines
2 KiB
Text
55 lines
2 KiB
Text
#
|
|
# This file is used for selecting non-standard netcard options, and
|
|
# need not be modified for typical use.
|
|
#
|
|
# Drivers are *not* selected in this file, but rather with files
|
|
# automatically generated during the top-level kernel configuration.
|
|
#
|
|
# Special options supported, indexed by their 'config' name:
|
|
#
|
|
# CONFIG_WD80x3 The Western Digital (SMC) WD80x3 driver
|
|
# WD_SHMEM=xxx Forces the address of the shared memory
|
|
# WD_no_mapout Don't map out the shared memory (faster, but
|
|
# your machine may not warm-boot).
|
|
# CONFIG_NE2000 The NE-[12]000 clone driver.
|
|
# PACKETBUF_MEMSIZE Allows an extra-large packet buffer to be
|
|
# used. Usually pointless under Linux.
|
|
# show_all_SAPROM Show the entire address PROM, not just the
|
|
# ethernet address, during boot.
|
|
# rw_bugfix Patch an obscure bug with a version of the 8390.
|
|
# CONFIG_HPLAN The HP-LAN driver (for 8390-based boards only).
|
|
# rw_bugfix Fix the same obscure bug.
|
|
# CONFIG_EL2 The 3c503 EtherLink II driver
|
|
# EL2_AUI Default to the AUI port instead of the BNC port
|
|
# no_probe_nonshared_memory Don't probe for programmed-I/O boards.
|
|
# EL2MEMTEST Test shared memory at boot-time.
|
|
# CONFIG_PLIP The Crynwr-protocol PL/IP driver
|
|
# INITIALTIMEOUTFACTOR Timing parameters.
|
|
# MAXTIMEOUTFACTOR
|
|
# D_LINK The D-Link DE-600 Portable Ethernet Adaptor.
|
|
# D_LINK_IO The D-Link I/O address (0x378 == typical)
|
|
# D_LINK_IRQ The D-Link IRQ number to use (IRQ7 == typical)
|
|
# D_LINK_DEBUG Enable or disable D-Link debugging
|
|
#
|
|
|
|
# The following options exist, but cannot be set in this file.
|
|
# lance.c
|
|
# LANCE_DMA Change the default DMA to other than DMA5.
|
|
# 8390.c
|
|
# NO_PINGPONG Disable ping-pong transmit buffers.
|
|
|
|
|
|
# Most drivers also have a *_DEBUG setting that may be adjusted.
|
|
# The 8390 drivers share the EI_DEBUG settting.
|
|
|
|
# General options for Space.c
|
|
OPTS = # -DETH0_ADDR=0x300 -DETH0_IRQ=11
|
|
|
|
WD_OPTS = #-DWD_SHMEM=0xDD000
|
|
EL2_OPTS = #-DEL2_AUI
|
|
NE_OPTS =
|
|
HP_OPTS =
|
|
PLIP_OPTS =
|
|
|
|
# The following are the only parameters that must be set in this file.
|
|
DL_OPTS = -DD_LINK_IO=0x378 -DD_LINK_IRQ=7 -UD_LINK_DEBUG
|