1012 lines
39 KiB
C
1012 lines
39 KiB
C
/*
|
|
* ASPEED GPIO Controller
|
|
*
|
|
* Copyright (C) 2017-2019 IBM Corp.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/host-utils.h"
|
|
#include "qemu/log.h"
|
|
#include "hw/gpio/aspeed_gpio.h"
|
|
#include "include/hw/misc/aspeed_scu.h"
|
|
#include "qapi/error.h"
|
|
#include "qapi/visitor.h"
|
|
#include "hw/irq.h"
|
|
#include "migration/vmstate.h"
|
|
|
|
#define GPIOS_PER_REG 32
|
|
#define GPIOS_PER_SET GPIOS_PER_REG
|
|
#define GPIO_PIN_GAP_SIZE 4
|
|
#define GPIOS_PER_GROUP 8
|
|
#define GPIO_GROUP_SHIFT 3
|
|
|
|
/* GPIO Source Types */
|
|
#define ASPEED_CMD_SRC_MASK 0x01010101
|
|
#define ASPEED_SOURCE_ARM 0
|
|
#define ASPEED_SOURCE_LPC 1
|
|
#define ASPEED_SOURCE_COPROCESSOR 2
|
|
#define ASPEED_SOURCE_RESERVED 3
|
|
|
|
/* GPIO Interrupt Triggers */
|
|
/*
|
|
* For each set of gpios there are three sensitivity registers that control
|
|
* the interrupt trigger mode.
|
|
*
|
|
* | 2 | 1 | 0 | trigger mode
|
|
* -----------------------------
|
|
* | 0 | 0 | 0 | falling-edge
|
|
* | 0 | 0 | 1 | rising-edge
|
|
* | 0 | 1 | 0 | level-low
|
|
* | 0 | 1 | 1 | level-high
|
|
* | 1 | X | X | dual-edge
|
|
*/
|
|
#define ASPEED_FALLING_EDGE 0
|
|
#define ASPEED_RISING_EDGE 1
|
|
#define ASPEED_LEVEL_LOW 2
|
|
#define ASPEED_LEVEL_HIGH 3
|
|
#define ASPEED_DUAL_EDGE 4
|
|
|
|
/* GPIO Register Address Offsets */
|
|
#define GPIO_ABCD_DATA_VALUE (0x000 >> 2)
|
|
#define GPIO_ABCD_DIRECTION (0x004 >> 2)
|
|
#define GPIO_ABCD_INT_ENABLE (0x008 >> 2)
|
|
#define GPIO_ABCD_INT_SENS_0 (0x00C >> 2)
|
|
#define GPIO_ABCD_INT_SENS_1 (0x010 >> 2)
|
|
#define GPIO_ABCD_INT_SENS_2 (0x014 >> 2)
|
|
#define GPIO_ABCD_INT_STATUS (0x018 >> 2)
|
|
#define GPIO_ABCD_RESET_TOLERANT (0x01C >> 2)
|
|
#define GPIO_EFGH_DATA_VALUE (0x020 >> 2)
|
|
#define GPIO_EFGH_DIRECTION (0x024 >> 2)
|
|
#define GPIO_EFGH_INT_ENABLE (0x028 >> 2)
|
|
#define GPIO_EFGH_INT_SENS_0 (0x02C >> 2)
|
|
#define GPIO_EFGH_INT_SENS_1 (0x030 >> 2)
|
|
#define GPIO_EFGH_INT_SENS_2 (0x034 >> 2)
|
|
#define GPIO_EFGH_INT_STATUS (0x038 >> 2)
|
|
#define GPIO_EFGH_RESET_TOLERANT (0x03C >> 2)
|
|
#define GPIO_ABCD_DEBOUNCE_1 (0x040 >> 2)
|
|
#define GPIO_ABCD_DEBOUNCE_2 (0x044 >> 2)
|
|
#define GPIO_EFGH_DEBOUNCE_1 (0x048 >> 2)
|
|
#define GPIO_EFGH_DEBOUNCE_2 (0x04C >> 2)
|
|
#define GPIO_DEBOUNCE_TIME_1 (0x050 >> 2)
|
|
#define GPIO_DEBOUNCE_TIME_2 (0x054 >> 2)
|
|
#define GPIO_DEBOUNCE_TIME_3 (0x058 >> 2)
|
|
#define GPIO_ABCD_COMMAND_SRC_0 (0x060 >> 2)
|
|
#define GPIO_ABCD_COMMAND_SRC_1 (0x064 >> 2)
|
|
#define GPIO_EFGH_COMMAND_SRC_0 (0x068 >> 2)
|
|
#define GPIO_EFGH_COMMAND_SRC_1 (0x06C >> 2)
|
|
#define GPIO_IJKL_DATA_VALUE (0x070 >> 2)
|
|
#define GPIO_IJKL_DIRECTION (0x074 >> 2)
|
|
#define GPIO_MNOP_DATA_VALUE (0x078 >> 2)
|
|
#define GPIO_MNOP_DIRECTION (0x07C >> 2)
|
|
#define GPIO_QRST_DATA_VALUE (0x080 >> 2)
|
|
#define GPIO_QRST_DIRECTION (0x084 >> 2)
|
|
#define GPIO_UVWX_DATA_VALUE (0x088 >> 2)
|
|
#define GPIO_UVWX_DIRECTION (0x08C >> 2)
|
|
#define GPIO_IJKL_COMMAND_SRC_0 (0x090 >> 2)
|
|
#define GPIO_IJKL_COMMAND_SRC_1 (0x094 >> 2)
|
|
#define GPIO_IJKL_INT_ENABLE (0x098 >> 2)
|
|
#define GPIO_IJKL_INT_SENS_0 (0x09C >> 2)
|
|
#define GPIO_IJKL_INT_SENS_1 (0x0A0 >> 2)
|
|
#define GPIO_IJKL_INT_SENS_2 (0x0A4 >> 2)
|
|
#define GPIO_IJKL_INT_STATUS (0x0A8 >> 2)
|
|
#define GPIO_IJKL_RESET_TOLERANT (0x0AC >> 2)
|
|
#define GPIO_IJKL_DEBOUNCE_1 (0x0B0 >> 2)
|
|
#define GPIO_IJKL_DEBOUNCE_2 (0x0B4 >> 2)
|
|
#define GPIO_IJKL_INPUT_MASK (0x0B8 >> 2)
|
|
#define GPIO_ABCD_DATA_READ (0x0C0 >> 2)
|
|
#define GPIO_EFGH_DATA_READ (0x0C4 >> 2)
|
|
#define GPIO_IJKL_DATA_READ (0x0C8 >> 2)
|
|
#define GPIO_MNOP_DATA_READ (0x0CC >> 2)
|
|
#define GPIO_QRST_DATA_READ (0x0D0 >> 2)
|
|
#define GPIO_UVWX_DATA_READ (0x0D4 >> 2)
|
|
#define GPIO_YZAAAB_DATA_READ (0x0D8 >> 2)
|
|
#define GPIO_AC_DATA_READ (0x0DC >> 2)
|
|
#define GPIO_MNOP_COMMAND_SRC_0 (0x0E0 >> 2)
|
|
#define GPIO_MNOP_COMMAND_SRC_1 (0x0E4 >> 2)
|
|
#define GPIO_MNOP_INT_ENABLE (0x0E8 >> 2)
|
|
#define GPIO_MNOP_INT_SENS_0 (0x0EC >> 2)
|
|
#define GPIO_MNOP_INT_SENS_1 (0x0F0 >> 2)
|
|
#define GPIO_MNOP_INT_SENS_2 (0x0F4 >> 2)
|
|
#define GPIO_MNOP_INT_STATUS (0x0F8 >> 2)
|
|
#define GPIO_MNOP_RESET_TOLERANT (0x0FC >> 2)
|
|
#define GPIO_MNOP_DEBOUNCE_1 (0x100 >> 2)
|
|
#define GPIO_MNOP_DEBOUNCE_2 (0x104 >> 2)
|
|
#define GPIO_MNOP_INPUT_MASK (0x108 >> 2)
|
|
#define GPIO_QRST_COMMAND_SRC_0 (0x110 >> 2)
|
|
#define GPIO_QRST_COMMAND_SRC_1 (0x114 >> 2)
|
|
#define GPIO_QRST_INT_ENABLE (0x118 >> 2)
|
|
#define GPIO_QRST_INT_SENS_0 (0x11C >> 2)
|
|
#define GPIO_QRST_INT_SENS_1 (0x120 >> 2)
|
|
#define GPIO_QRST_INT_SENS_2 (0x124 >> 2)
|
|
#define GPIO_QRST_INT_STATUS (0x128 >> 2)
|
|
#define GPIO_QRST_RESET_TOLERANT (0x12C >> 2)
|
|
#define GPIO_QRST_DEBOUNCE_1 (0x130 >> 2)
|
|
#define GPIO_QRST_DEBOUNCE_2 (0x134 >> 2)
|
|
#define GPIO_QRST_INPUT_MASK (0x138 >> 2)
|
|
#define GPIO_UVWX_COMMAND_SRC_0 (0x140 >> 2)
|
|
#define GPIO_UVWX_COMMAND_SRC_1 (0x144 >> 2)
|
|
#define GPIO_UVWX_INT_ENABLE (0x148 >> 2)
|
|
#define GPIO_UVWX_INT_SENS_0 (0x14C >> 2)
|
|
#define GPIO_UVWX_INT_SENS_1 (0x150 >> 2)
|
|
#define GPIO_UVWX_INT_SENS_2 (0x154 >> 2)
|
|
#define GPIO_UVWX_INT_STATUS (0x158 >> 2)
|
|
#define GPIO_UVWX_RESET_TOLERANT (0x15C >> 2)
|
|
#define GPIO_UVWX_DEBOUNCE_1 (0x160 >> 2)
|
|
#define GPIO_UVWX_DEBOUNCE_2 (0x164 >> 2)
|
|
#define GPIO_UVWX_INPUT_MASK (0x168 >> 2)
|
|
#define GPIO_YZAAAB_COMMAND_SRC_0 (0x170 >> 2)
|
|
#define GPIO_YZAAAB_COMMAND_SRC_1 (0x174 >> 2)
|
|
#define GPIO_YZAAAB_INT_ENABLE (0x178 >> 2)
|
|
#define GPIO_YZAAAB_INT_SENS_0 (0x17C >> 2)
|
|
#define GPIO_YZAAAB_INT_SENS_1 (0x180 >> 2)
|
|
#define GPIO_YZAAAB_INT_SENS_2 (0x184 >> 2)
|
|
#define GPIO_YZAAAB_INT_STATUS (0x188 >> 2)
|
|
#define GPIO_YZAAAB_RESET_TOLERANT (0x18C >> 2)
|
|
#define GPIO_YZAAAB_DEBOUNCE_1 (0x190 >> 2)
|
|
#define GPIO_YZAAAB_DEBOUNCE_2 (0x194 >> 2)
|
|
#define GPIO_YZAAAB_INPUT_MASK (0x198 >> 2)
|
|
#define GPIO_AC_COMMAND_SRC_0 (0x1A0 >> 2)
|
|
#define GPIO_AC_COMMAND_SRC_1 (0x1A4 >> 2)
|
|
#define GPIO_AC_INT_ENABLE (0x1A8 >> 2)
|
|
#define GPIO_AC_INT_SENS_0 (0x1AC >> 2)
|
|
#define GPIO_AC_INT_SENS_1 (0x1B0 >> 2)
|
|
#define GPIO_AC_INT_SENS_2 (0x1B4 >> 2)
|
|
#define GPIO_AC_INT_STATUS (0x1B8 >> 2)
|
|
#define GPIO_AC_RESET_TOLERANT (0x1BC >> 2)
|
|
#define GPIO_AC_DEBOUNCE_1 (0x1C0 >> 2)
|
|
#define GPIO_AC_DEBOUNCE_2 (0x1C4 >> 2)
|
|
#define GPIO_AC_INPUT_MASK (0x1C8 >> 2)
|
|
#define GPIO_ABCD_INPUT_MASK (0x1D0 >> 2)
|
|
#define GPIO_EFGH_INPUT_MASK (0x1D4 >> 2)
|
|
#define GPIO_YZAAAB_DATA_VALUE (0x1E0 >> 2)
|
|
#define GPIO_YZAAAB_DIRECTION (0x1E4 >> 2)
|
|
#define GPIO_AC_DATA_VALUE (0x1E8 >> 2)
|
|
#define GPIO_AC_DIRECTION (0x1EC >> 2)
|
|
#define GPIO_3_6V_MEM_SIZE 0x1F0
|
|
#define GPIO_3_6V_REG_ARRAY_SIZE (GPIO_3_6V_MEM_SIZE >> 2)
|
|
|
|
/* AST2600 only - 1.8V gpios */
|
|
/*
|
|
* The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198)
|
|
* and addtional 1.8V gpios (memory offsets 0x800-0x9D4).
|
|
*/
|
|
#define GPIO_1_8V_REG_OFFSET 0x800
|
|
#define GPIO_1_8V_ABCD_DATA_VALUE ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_DIRECTION ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_INT_ENABLE ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_INT_SENS_0 ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_INT_SENS_1 ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_INT_SENS_2 ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_INT_STATUS ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_DATA_VALUE ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_DIRECTION ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_INT_ENABLE ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_INT_SENS_0 ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_INT_SENS_1 ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_INT_SENS_2 ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_INT_STATUS ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_RESET_TOLERANT ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_DEBOUNCE_1 ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_DEBOUNCE_2 ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_DEBOUNCE_1 ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_DEBOUNCE_2 ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_DEBOUNCE_TIME_1 ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_DEBOUNCE_TIME_2 ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_DEBOUNCE_TIME_3 ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_COMMAND_SRC_0 ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_COMMAND_SRC_1 ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_COMMAND_SRC_0 ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_COMMAND_SRC_1 ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_DATA_READ ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_DATA_READ ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_ABCD_INPUT_MASK ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_E_INPUT_MASK ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_1_8V_MEM_SIZE 0x9D8
|
|
#define GPIO_1_8V_REG_ARRAY_SIZE ((GPIO_1_8V_MEM_SIZE - \
|
|
GPIO_1_8V_REG_OFFSET) >> 2)
|
|
#define GPIO_MAX_MEM_SIZE MAX(GPIO_3_6V_MEM_SIZE, GPIO_1_8V_MEM_SIZE)
|
|
|
|
static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio)
|
|
{
|
|
uint32_t falling_edge = 0, rising_edge = 0;
|
|
uint32_t int_trigger = extract32(regs->int_sens_0, gpio, 1)
|
|
| extract32(regs->int_sens_1, gpio, 1) << 1
|
|
| extract32(regs->int_sens_2, gpio, 1) << 2;
|
|
uint32_t gpio_curr_high = extract32(regs->data_value, gpio, 1);
|
|
uint32_t gpio_int_enabled = extract32(regs->int_enable, gpio, 1);
|
|
|
|
if (!gpio_int_enabled) {
|
|
return 0;
|
|
}
|
|
|
|
/* Detect edges */
|
|
if (gpio_curr_high && !gpio_prev_high) {
|
|
rising_edge = 1;
|
|
} else if (!gpio_curr_high && gpio_prev_high) {
|
|
falling_edge = 1;
|
|
}
|
|
|
|
if (((int_trigger == ASPEED_FALLING_EDGE) && falling_edge) ||
|
|
((int_trigger == ASPEED_RISING_EDGE) && rising_edge) ||
|
|
((int_trigger == ASPEED_LEVEL_LOW) && !gpio_curr_high) ||
|
|
((int_trigger == ASPEED_LEVEL_HIGH) && gpio_curr_high) ||
|
|
((int_trigger >= ASPEED_DUAL_EDGE) && (rising_edge || falling_edge)))
|
|
{
|
|
regs->int_status = deposit32(regs->int_status, gpio, 1, 1);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define nested_struct_index(ta, pa, m, tb, pb) \
|
|
(pb - ((tb *)(((char *)pa) + offsetof(ta, m))))
|
|
|
|
static ptrdiff_t aspeed_gpio_set_idx(AspeedGPIOState *s, GPIOSets *regs)
|
|
{
|
|
return nested_struct_index(AspeedGPIOState, s, sets, GPIOSets, regs);
|
|
}
|
|
|
|
static void aspeed_gpio_update(AspeedGPIOState *s, GPIOSets *regs,
|
|
uint32_t value)
|
|
{
|
|
uint32_t input_mask = regs->input_mask;
|
|
uint32_t direction = regs->direction;
|
|
uint32_t old = regs->data_value;
|
|
uint32_t new = value;
|
|
uint32_t diff;
|
|
int gpio;
|
|
|
|
diff = old ^ new;
|
|
if (diff) {
|
|
for (gpio = 0; gpio < GPIOS_PER_REG; gpio++) {
|
|
uint32_t mask = 1 << gpio;
|
|
|
|
/* If the gpio needs to be updated... */
|
|
if (!(diff & mask)) {
|
|
continue;
|
|
}
|
|
|
|
/* ...and we're output or not input-masked... */
|
|
if (!(direction & mask) && (input_mask & mask)) {
|
|
continue;
|
|
}
|
|
|
|
/* ...then update the state. */
|
|
if (mask & new) {
|
|
regs->data_value |= mask;
|
|
} else {
|
|
regs->data_value &= ~mask;
|
|
}
|
|
|
|
/* If the gpio is set to output... */
|
|
if (direction & mask) {
|
|
/* ...trigger the line-state IRQ */
|
|
ptrdiff_t set = aspeed_gpio_set_idx(s, regs);
|
|
size_t offset = set * GPIOS_PER_SET + gpio;
|
|
qemu_set_irq(s->gpios[offset], !!(new & mask));
|
|
} else {
|
|
/* ...otherwise if we meet the line's current IRQ policy... */
|
|
if (aspeed_evaluate_irq(regs, old & mask, gpio)) {
|
|
/* ...trigger the VIC IRQ */
|
|
s->pending++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
qemu_set_irq(s->irq, !!(s->pending));
|
|
}
|
|
|
|
static uint32_t aspeed_adjust_pin(AspeedGPIOState *s, uint32_t pin)
|
|
{
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
|
|
/*
|
|
* The 2500 has a 4 pin gap in group AB and the 2400 has a 4 pin
|
|
* gap in group Y (and only four pins in AB but this is the last group so
|
|
* it doesn't matter).
|
|
*/
|
|
if (agc->gap && pin >= agc->gap) {
|
|
pin += GPIO_PIN_GAP_SIZE;
|
|
}
|
|
|
|
return pin;
|
|
}
|
|
|
|
static bool aspeed_gpio_get_pin_level(AspeedGPIOState *s, uint32_t set_idx,
|
|
uint32_t pin)
|
|
{
|
|
uint32_t reg_val;
|
|
uint32_t pin_mask = 1 << pin;
|
|
|
|
reg_val = s->sets[set_idx].data_value;
|
|
|
|
return !!(reg_val & pin_mask);
|
|
}
|
|
|
|
static void aspeed_gpio_set_pin_level(AspeedGPIOState *s, uint32_t set_idx,
|
|
uint32_t pin, bool level)
|
|
{
|
|
uint32_t value = s->sets[set_idx].data_value;
|
|
uint32_t pin_mask = 1 << pin;
|
|
|
|
if (level) {
|
|
value |= pin_mask;
|
|
} else {
|
|
value &= !pin_mask;
|
|
}
|
|
|
|
aspeed_gpio_update(s, &s->sets[set_idx], value);
|
|
}
|
|
|
|
/*
|
|
* | src_1 | src_2 | source |
|
|
* |-----------------------------|
|
|
* | 0 | 0 | ARM |
|
|
* | 0 | 1 | LPC |
|
|
* | 1 | 0 | Coprocessor|
|
|
* | 1 | 1 | Reserved |
|
|
*
|
|
* Once the source of a set is programmed, corresponding bits in the
|
|
* data_value, direction, interrupt [enable, sens[0-2]], reset_tol and
|
|
* debounce registers can only be written by the source.
|
|
*
|
|
* Source is ARM by default
|
|
* only bits 24, 16, 8, and 0 can be set
|
|
*
|
|
* we don't currently have a model for the LPC or Coprocessor
|
|
*/
|
|
static uint32_t update_value_control_source(GPIOSets *regs, uint32_t old_value,
|
|
uint32_t value)
|
|
{
|
|
int i;
|
|
int cmd_source;
|
|
|
|
/* assume the source is always ARM for now */
|
|
int source = ASPEED_SOURCE_ARM;
|
|
|
|
uint32_t new_value = 0;
|
|
|
|
/* for each group in set */
|
|
for (i = 0; i < GPIOS_PER_REG; i += GPIOS_PER_GROUP) {
|
|
cmd_source = extract32(regs->cmd_source_0, i, 1)
|
|
| (extract32(regs->cmd_source_1, i, 1) << 1);
|
|
|
|
if (source == cmd_source) {
|
|
new_value |= (0xff << i) & value;
|
|
} else {
|
|
new_value |= (0xff << i) & old_value;
|
|
}
|
|
}
|
|
return new_value;
|
|
}
|
|
|
|
static const AspeedGPIOReg aspeed_3_6v_gpios[GPIO_3_6V_REG_ARRAY_SIZE] = {
|
|
/* Set ABCD */
|
|
[GPIO_ABCD_DATA_VALUE] = { 0, gpio_reg_data_value },
|
|
[GPIO_ABCD_DIRECTION] = { 0, gpio_reg_direction },
|
|
[GPIO_ABCD_INT_ENABLE] = { 0, gpio_reg_int_enable },
|
|
[GPIO_ABCD_INT_SENS_0] = { 0, gpio_reg_int_sens_0 },
|
|
[GPIO_ABCD_INT_SENS_1] = { 0, gpio_reg_int_sens_1 },
|
|
[GPIO_ABCD_INT_SENS_2] = { 0, gpio_reg_int_sens_2 },
|
|
[GPIO_ABCD_INT_STATUS] = { 0, gpio_reg_int_status },
|
|
[GPIO_ABCD_RESET_TOLERANT] = { 0, gpio_reg_reset_tolerant },
|
|
[GPIO_ABCD_DEBOUNCE_1] = { 0, gpio_reg_debounce_1 },
|
|
[GPIO_ABCD_DEBOUNCE_2] = { 0, gpio_reg_debounce_2 },
|
|
[GPIO_ABCD_COMMAND_SRC_0] = { 0, gpio_reg_cmd_source_0 },
|
|
[GPIO_ABCD_COMMAND_SRC_1] = { 0, gpio_reg_cmd_source_1 },
|
|
[GPIO_ABCD_DATA_READ] = { 0, gpio_reg_data_read },
|
|
[GPIO_ABCD_INPUT_MASK] = { 0, gpio_reg_input_mask },
|
|
/* Set EFGH */
|
|
[GPIO_EFGH_DATA_VALUE] = { 1, gpio_reg_data_value },
|
|
[GPIO_EFGH_DIRECTION] = { 1, gpio_reg_direction },
|
|
[GPIO_EFGH_INT_ENABLE] = { 1, gpio_reg_int_enable },
|
|
[GPIO_EFGH_INT_SENS_0] = { 1, gpio_reg_int_sens_0 },
|
|
[GPIO_EFGH_INT_SENS_1] = { 1, gpio_reg_int_sens_1 },
|
|
[GPIO_EFGH_INT_SENS_2] = { 1, gpio_reg_int_sens_2 },
|
|
[GPIO_EFGH_INT_STATUS] = { 1, gpio_reg_int_status },
|
|
[GPIO_EFGH_RESET_TOLERANT] = { 1, gpio_reg_reset_tolerant },
|
|
[GPIO_EFGH_DEBOUNCE_1] = { 1, gpio_reg_debounce_1 },
|
|
[GPIO_EFGH_DEBOUNCE_2] = { 1, gpio_reg_debounce_2 },
|
|
[GPIO_EFGH_COMMAND_SRC_0] = { 1, gpio_reg_cmd_source_0 },
|
|
[GPIO_EFGH_COMMAND_SRC_1] = { 1, gpio_reg_cmd_source_1 },
|
|
[GPIO_EFGH_DATA_READ] = { 1, gpio_reg_data_read },
|
|
[GPIO_EFGH_INPUT_MASK] = { 1, gpio_reg_input_mask },
|
|
/* Set IJKL */
|
|
[GPIO_IJKL_DATA_VALUE] = { 2, gpio_reg_data_value },
|
|
[GPIO_IJKL_DIRECTION] = { 2, gpio_reg_direction },
|
|
[GPIO_IJKL_INT_ENABLE] = { 2, gpio_reg_int_enable },
|
|
[GPIO_IJKL_INT_SENS_0] = { 2, gpio_reg_int_sens_0 },
|
|
[GPIO_IJKL_INT_SENS_1] = { 2, gpio_reg_int_sens_1 },
|
|
[GPIO_IJKL_INT_SENS_2] = { 2, gpio_reg_int_sens_2 },
|
|
[GPIO_IJKL_INT_STATUS] = { 2, gpio_reg_int_status },
|
|
[GPIO_IJKL_RESET_TOLERANT] = { 2, gpio_reg_reset_tolerant },
|
|
[GPIO_IJKL_DEBOUNCE_1] = { 2, gpio_reg_debounce_1 },
|
|
[GPIO_IJKL_DEBOUNCE_2] = { 2, gpio_reg_debounce_2 },
|
|
[GPIO_IJKL_COMMAND_SRC_0] = { 2, gpio_reg_cmd_source_0 },
|
|
[GPIO_IJKL_COMMAND_SRC_1] = { 2, gpio_reg_cmd_source_1 },
|
|
[GPIO_IJKL_DATA_READ] = { 2, gpio_reg_data_read },
|
|
[GPIO_IJKL_INPUT_MASK] = { 2, gpio_reg_input_mask },
|
|
/* Set MNOP */
|
|
[GPIO_MNOP_DATA_VALUE] = { 3, gpio_reg_data_value },
|
|
[GPIO_MNOP_DIRECTION] = { 3, gpio_reg_direction },
|
|
[GPIO_MNOP_INT_ENABLE] = { 3, gpio_reg_int_enable },
|
|
[GPIO_MNOP_INT_SENS_0] = { 3, gpio_reg_int_sens_0 },
|
|
[GPIO_MNOP_INT_SENS_1] = { 3, gpio_reg_int_sens_1 },
|
|
[GPIO_MNOP_INT_SENS_2] = { 3, gpio_reg_int_sens_2 },
|
|
[GPIO_MNOP_INT_STATUS] = { 3, gpio_reg_int_status },
|
|
[GPIO_MNOP_RESET_TOLERANT] = { 3, gpio_reg_reset_tolerant },
|
|
[GPIO_MNOP_DEBOUNCE_1] = { 3, gpio_reg_debounce_1 },
|
|
[GPIO_MNOP_DEBOUNCE_2] = { 3, gpio_reg_debounce_2 },
|
|
[GPIO_MNOP_COMMAND_SRC_0] = { 3, gpio_reg_cmd_source_0 },
|
|
[GPIO_MNOP_COMMAND_SRC_1] = { 3, gpio_reg_cmd_source_1 },
|
|
[GPIO_MNOP_DATA_READ] = { 3, gpio_reg_data_read },
|
|
[GPIO_MNOP_INPUT_MASK] = { 3, gpio_reg_input_mask },
|
|
/* Set QRST */
|
|
[GPIO_QRST_DATA_VALUE] = { 4, gpio_reg_data_value },
|
|
[GPIO_QRST_DIRECTION] = { 4, gpio_reg_direction },
|
|
[GPIO_QRST_INT_ENABLE] = { 4, gpio_reg_int_enable },
|
|
[GPIO_QRST_INT_SENS_0] = { 4, gpio_reg_int_sens_0 },
|
|
[GPIO_QRST_INT_SENS_1] = { 4, gpio_reg_int_sens_1 },
|
|
[GPIO_QRST_INT_SENS_2] = { 4, gpio_reg_int_sens_2 },
|
|
[GPIO_QRST_INT_STATUS] = { 4, gpio_reg_int_status },
|
|
[GPIO_QRST_RESET_TOLERANT] = { 4, gpio_reg_reset_tolerant },
|
|
[GPIO_QRST_DEBOUNCE_1] = { 4, gpio_reg_debounce_1 },
|
|
[GPIO_QRST_DEBOUNCE_2] = { 4, gpio_reg_debounce_2 },
|
|
[GPIO_QRST_COMMAND_SRC_0] = { 4, gpio_reg_cmd_source_0 },
|
|
[GPIO_QRST_COMMAND_SRC_1] = { 4, gpio_reg_cmd_source_1 },
|
|
[GPIO_QRST_DATA_READ] = { 4, gpio_reg_data_read },
|
|
[GPIO_QRST_INPUT_MASK] = { 4, gpio_reg_input_mask },
|
|
/* Set UVWX */
|
|
[GPIO_UVWX_DATA_VALUE] = { 5, gpio_reg_data_value },
|
|
[GPIO_UVWX_DIRECTION] = { 5, gpio_reg_direction },
|
|
[GPIO_UVWX_INT_ENABLE] = { 5, gpio_reg_int_enable },
|
|
[GPIO_UVWX_INT_SENS_0] = { 5, gpio_reg_int_sens_0 },
|
|
[GPIO_UVWX_INT_SENS_1] = { 5, gpio_reg_int_sens_1 },
|
|
[GPIO_UVWX_INT_SENS_2] = { 5, gpio_reg_int_sens_2 },
|
|
[GPIO_UVWX_INT_STATUS] = { 5, gpio_reg_int_status },
|
|
[GPIO_UVWX_RESET_TOLERANT] = { 5, gpio_reg_reset_tolerant },
|
|
[GPIO_UVWX_DEBOUNCE_1] = { 5, gpio_reg_debounce_1 },
|
|
[GPIO_UVWX_DEBOUNCE_2] = { 5, gpio_reg_debounce_2 },
|
|
[GPIO_UVWX_COMMAND_SRC_0] = { 5, gpio_reg_cmd_source_0 },
|
|
[GPIO_UVWX_COMMAND_SRC_1] = { 5, gpio_reg_cmd_source_1 },
|
|
[GPIO_UVWX_DATA_READ] = { 5, gpio_reg_data_read },
|
|
[GPIO_UVWX_INPUT_MASK] = { 5, gpio_reg_input_mask },
|
|
/* Set YZAAAB */
|
|
[GPIO_YZAAAB_DATA_VALUE] = { 6, gpio_reg_data_value },
|
|
[GPIO_YZAAAB_DIRECTION] = { 6, gpio_reg_direction },
|
|
[GPIO_YZAAAB_INT_ENABLE] = { 6, gpio_reg_int_enable },
|
|
[GPIO_YZAAAB_INT_SENS_0] = { 6, gpio_reg_int_sens_0 },
|
|
[GPIO_YZAAAB_INT_SENS_1] = { 6, gpio_reg_int_sens_1 },
|
|
[GPIO_YZAAAB_INT_SENS_2] = { 6, gpio_reg_int_sens_2 },
|
|
[GPIO_YZAAAB_INT_STATUS] = { 6, gpio_reg_int_status },
|
|
[GPIO_YZAAAB_RESET_TOLERANT] = { 6, gpio_reg_reset_tolerant },
|
|
[GPIO_YZAAAB_DEBOUNCE_1] = { 6, gpio_reg_debounce_1 },
|
|
[GPIO_YZAAAB_DEBOUNCE_2] = { 6, gpio_reg_debounce_2 },
|
|
[GPIO_YZAAAB_COMMAND_SRC_0] = { 6, gpio_reg_cmd_source_0 },
|
|
[GPIO_YZAAAB_COMMAND_SRC_1] = { 6, gpio_reg_cmd_source_1 },
|
|
[GPIO_YZAAAB_DATA_READ] = { 6, gpio_reg_data_read },
|
|
[GPIO_YZAAAB_INPUT_MASK] = { 6, gpio_reg_input_mask },
|
|
/* Set AC (ast2500 only) */
|
|
[GPIO_AC_DATA_VALUE] = { 7, gpio_reg_data_value },
|
|
[GPIO_AC_DIRECTION] = { 7, gpio_reg_direction },
|
|
[GPIO_AC_INT_ENABLE] = { 7, gpio_reg_int_enable },
|
|
[GPIO_AC_INT_SENS_0] = { 7, gpio_reg_int_sens_0 },
|
|
[GPIO_AC_INT_SENS_1] = { 7, gpio_reg_int_sens_1 },
|
|
[GPIO_AC_INT_SENS_2] = { 7, gpio_reg_int_sens_2 },
|
|
[GPIO_AC_INT_STATUS] = { 7, gpio_reg_int_status },
|
|
[GPIO_AC_RESET_TOLERANT] = { 7, gpio_reg_reset_tolerant },
|
|
[GPIO_AC_DEBOUNCE_1] = { 7, gpio_reg_debounce_1 },
|
|
[GPIO_AC_DEBOUNCE_2] = { 7, gpio_reg_debounce_2 },
|
|
[GPIO_AC_COMMAND_SRC_0] = { 7, gpio_reg_cmd_source_0 },
|
|
[GPIO_AC_COMMAND_SRC_1] = { 7, gpio_reg_cmd_source_1 },
|
|
[GPIO_AC_DATA_READ] = { 7, gpio_reg_data_read },
|
|
[GPIO_AC_INPUT_MASK] = { 7, gpio_reg_input_mask },
|
|
};
|
|
|
|
static const AspeedGPIOReg aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = {
|
|
/* 1.8V Set ABCD */
|
|
[GPIO_1_8V_ABCD_DATA_VALUE] = {0, gpio_reg_data_value},
|
|
[GPIO_1_8V_ABCD_DIRECTION] = {0, gpio_reg_direction},
|
|
[GPIO_1_8V_ABCD_INT_ENABLE] = {0, gpio_reg_int_enable},
|
|
[GPIO_1_8V_ABCD_INT_SENS_0] = {0, gpio_reg_int_sens_0},
|
|
[GPIO_1_8V_ABCD_INT_SENS_1] = {0, gpio_reg_int_sens_1},
|
|
[GPIO_1_8V_ABCD_INT_SENS_2] = {0, gpio_reg_int_sens_2},
|
|
[GPIO_1_8V_ABCD_INT_STATUS] = {0, gpio_reg_int_status},
|
|
[GPIO_1_8V_ABCD_RESET_TOLERANT] = {0, gpio_reg_reset_tolerant},
|
|
[GPIO_1_8V_ABCD_DEBOUNCE_1] = {0, gpio_reg_debounce_1},
|
|
[GPIO_1_8V_ABCD_DEBOUNCE_2] = {0, gpio_reg_debounce_2},
|
|
[GPIO_1_8V_ABCD_COMMAND_SRC_0] = {0, gpio_reg_cmd_source_0},
|
|
[GPIO_1_8V_ABCD_COMMAND_SRC_1] = {0, gpio_reg_cmd_source_1},
|
|
[GPIO_1_8V_ABCD_DATA_READ] = {0, gpio_reg_data_read},
|
|
[GPIO_1_8V_ABCD_INPUT_MASK] = {0, gpio_reg_input_mask},
|
|
/* 1.8V Set E */
|
|
[GPIO_1_8V_E_DATA_VALUE] = {1, gpio_reg_data_value},
|
|
[GPIO_1_8V_E_DIRECTION] = {1, gpio_reg_direction},
|
|
[GPIO_1_8V_E_INT_ENABLE] = {1, gpio_reg_int_enable},
|
|
[GPIO_1_8V_E_INT_SENS_0] = {1, gpio_reg_int_sens_0},
|
|
[GPIO_1_8V_E_INT_SENS_1] = {1, gpio_reg_int_sens_1},
|
|
[GPIO_1_8V_E_INT_SENS_2] = {1, gpio_reg_int_sens_2},
|
|
[GPIO_1_8V_E_INT_STATUS] = {1, gpio_reg_int_status},
|
|
[GPIO_1_8V_E_RESET_TOLERANT] = {1, gpio_reg_reset_tolerant},
|
|
[GPIO_1_8V_E_DEBOUNCE_1] = {1, gpio_reg_debounce_1},
|
|
[GPIO_1_8V_E_DEBOUNCE_2] = {1, gpio_reg_debounce_2},
|
|
[GPIO_1_8V_E_COMMAND_SRC_0] = {1, gpio_reg_cmd_source_0},
|
|
[GPIO_1_8V_E_COMMAND_SRC_1] = {1, gpio_reg_cmd_source_1},
|
|
[GPIO_1_8V_E_DATA_READ] = {1, gpio_reg_data_read},
|
|
[GPIO_1_8V_E_INPUT_MASK] = {1, gpio_reg_input_mask},
|
|
};
|
|
|
|
static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size)
|
|
{
|
|
AspeedGPIOState *s = ASPEED_GPIO(opaque);
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
|
|
uint64_t idx = -1;
|
|
const AspeedGPIOReg *reg;
|
|
GPIOSets *set;
|
|
|
|
idx = offset >> 2;
|
|
if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
|
|
idx -= GPIO_DEBOUNCE_TIME_1;
|
|
return (uint64_t) s->debounce_regs[idx];
|
|
}
|
|
|
|
reg = &agc->reg_table[idx];
|
|
if (reg->set_idx >= agc->nr_gpio_sets) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%"
|
|
HWADDR_PRIx"\n", __func__, offset);
|
|
return 0;
|
|
}
|
|
|
|
set = &s->sets[reg->set_idx];
|
|
switch (reg->type) {
|
|
case gpio_reg_data_value:
|
|
return set->data_value;
|
|
case gpio_reg_direction:
|
|
return set->direction;
|
|
case gpio_reg_int_enable:
|
|
return set->int_enable;
|
|
case gpio_reg_int_sens_0:
|
|
return set->int_sens_0;
|
|
case gpio_reg_int_sens_1:
|
|
return set->int_sens_1;
|
|
case gpio_reg_int_sens_2:
|
|
return set->int_sens_2;
|
|
case gpio_reg_int_status:
|
|
return set->int_status;
|
|
case gpio_reg_reset_tolerant:
|
|
return set->reset_tol;
|
|
case gpio_reg_debounce_1:
|
|
return set->debounce_1;
|
|
case gpio_reg_debounce_2:
|
|
return set->debounce_2;
|
|
case gpio_reg_cmd_source_0:
|
|
return set->cmd_source_0;
|
|
case gpio_reg_cmd_source_1:
|
|
return set->cmd_source_1;
|
|
case gpio_reg_data_read:
|
|
return set->data_read;
|
|
case gpio_reg_input_mask:
|
|
return set->input_mask;
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%"
|
|
HWADDR_PRIx"\n", __func__, offset);
|
|
return 0;
|
|
};
|
|
}
|
|
|
|
static void aspeed_gpio_write(void *opaque, hwaddr offset, uint64_t data,
|
|
uint32_t size)
|
|
{
|
|
AspeedGPIOState *s = ASPEED_GPIO(opaque);
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
|
|
const GPIOSetProperties *props;
|
|
uint64_t idx = -1;
|
|
const AspeedGPIOReg *reg;
|
|
GPIOSets *set;
|
|
uint32_t cleared;
|
|
|
|
idx = offset >> 2;
|
|
if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
|
|
idx -= GPIO_DEBOUNCE_TIME_1;
|
|
s->debounce_regs[idx] = (uint32_t) data;
|
|
return;
|
|
}
|
|
|
|
reg = &agc->reg_table[idx];
|
|
if (reg->set_idx >= agc->nr_gpio_sets) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
|
|
HWADDR_PRIx"\n", __func__, offset);
|
|
return;
|
|
}
|
|
|
|
set = &s->sets[reg->set_idx];
|
|
props = &agc->props[reg->set_idx];
|
|
|
|
switch (reg->type) {
|
|
case gpio_reg_data_value:
|
|
data &= props->output;
|
|
data = update_value_control_source(set, set->data_value, data);
|
|
set->data_read = data;
|
|
aspeed_gpio_update(s, set, data);
|
|
return;
|
|
case gpio_reg_direction:
|
|
/*
|
|
* where data is the value attempted to be written to the pin:
|
|
* pin type | input mask | output mask | expected value
|
|
* ------------------------------------------------------------
|
|
* bidirectional | 1 | 1 | data
|
|
* input only | 1 | 0 | 0
|
|
* output only | 0 | 1 | 1
|
|
* no pin / gap | 0 | 0 | 0
|
|
*
|
|
* which is captured by:
|
|
* data = ( data | ~input) & output;
|
|
*/
|
|
data = (data | ~props->input) & props->output;
|
|
set->direction = update_value_control_source(set, set->direction, data);
|
|
break;
|
|
case gpio_reg_int_enable:
|
|
set->int_enable = update_value_control_source(set, set->int_enable,
|
|
data);
|
|
break;
|
|
case gpio_reg_int_sens_0:
|
|
set->int_sens_0 = update_value_control_source(set, set->int_sens_0,
|
|
data);
|
|
break;
|
|
case gpio_reg_int_sens_1:
|
|
set->int_sens_1 = update_value_control_source(set, set->int_sens_1,
|
|
data);
|
|
break;
|
|
case gpio_reg_int_sens_2:
|
|
set->int_sens_2 = update_value_control_source(set, set->int_sens_2,
|
|
data);
|
|
break;
|
|
case gpio_reg_int_status:
|
|
cleared = ctpop32(data & set->int_status);
|
|
if (s->pending && cleared) {
|
|
assert(s->pending >= cleared);
|
|
s->pending -= cleared;
|
|
}
|
|
set->int_status &= ~data;
|
|
break;
|
|
case gpio_reg_reset_tolerant:
|
|
set->reset_tol = update_value_control_source(set, set->reset_tol,
|
|
data);
|
|
return;
|
|
case gpio_reg_debounce_1:
|
|
set->debounce_1 = update_value_control_source(set, set->debounce_1,
|
|
data);
|
|
return;
|
|
case gpio_reg_debounce_2:
|
|
set->debounce_2 = update_value_control_source(set, set->debounce_2,
|
|
data);
|
|
return;
|
|
case gpio_reg_cmd_source_0:
|
|
set->cmd_source_0 = data & ASPEED_CMD_SRC_MASK;
|
|
return;
|
|
case gpio_reg_cmd_source_1:
|
|
set->cmd_source_1 = data & ASPEED_CMD_SRC_MASK;
|
|
return;
|
|
case gpio_reg_data_read:
|
|
/* Read only register */
|
|
return;
|
|
case gpio_reg_input_mask:
|
|
/*
|
|
* feeds into interrupt generation
|
|
* 0: read from data value reg will be updated
|
|
* 1: read from data value reg will not be updated
|
|
*/
|
|
set->input_mask = data & props->input;
|
|
break;
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
|
|
HWADDR_PRIx"\n", __func__, offset);
|
|
return;
|
|
}
|
|
aspeed_gpio_update(s, set, set->data_value);
|
|
return;
|
|
}
|
|
|
|
static int get_set_idx(AspeedGPIOState *s, const char *group, int *group_idx)
|
|
{
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
|
|
int set_idx, g_idx;
|
|
|
|
for (set_idx = 0; set_idx < agc->nr_gpio_sets; set_idx++) {
|
|
const GPIOSetProperties *set_props = &agc->props[set_idx];
|
|
for (g_idx = 0; g_idx < ASPEED_GROUPS_PER_SET; g_idx++) {
|
|
if (!strncmp(group, set_props->group_label[g_idx], strlen(group))) {
|
|
*group_idx = g_idx;
|
|
return set_idx;
|
|
}
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void aspeed_gpio_get_pin(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
int pin = 0xfff;
|
|
bool level = true;
|
|
char group[4];
|
|
AspeedGPIOState *s = ASPEED_GPIO(obj);
|
|
int set_idx, group_idx = 0;
|
|
|
|
if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
|
|
/* 1.8V gpio */
|
|
if (sscanf(name, "gpio%3[18A-E]%1d", group, &pin) != 2) {
|
|
error_setg(errp, "%s: error reading %s", __func__, name);
|
|
return;
|
|
}
|
|
}
|
|
set_idx = get_set_idx(s, group, &group_idx);
|
|
if (set_idx == -1) {
|
|
error_setg(errp, "%s: invalid group %s", __func__, group);
|
|
return;
|
|
}
|
|
pin = pin + group_idx * GPIOS_PER_GROUP;
|
|
level = aspeed_gpio_get_pin_level(s, set_idx, pin);
|
|
visit_type_bool(v, name, &level, errp);
|
|
}
|
|
|
|
static void aspeed_gpio_set_pin(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
bool level;
|
|
int pin = 0xfff;
|
|
char group[4];
|
|
AspeedGPIOState *s = ASPEED_GPIO(obj);
|
|
int set_idx, group_idx = 0;
|
|
|
|
if (!visit_type_bool(v, name, &level, errp)) {
|
|
return;
|
|
}
|
|
if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
|
|
/* 1.8V gpio */
|
|
if (sscanf(name, "gpio%3[18A-E]%1d", group, &pin) != 2) {
|
|
error_setg(errp, "%s: error reading %s", __func__, name);
|
|
return;
|
|
}
|
|
}
|
|
set_idx = get_set_idx(s, group, &group_idx);
|
|
if (set_idx == -1) {
|
|
error_setg(errp, "%s: invalid group %s", __func__, group);
|
|
return;
|
|
}
|
|
pin = pin + group_idx * GPIOS_PER_GROUP;
|
|
aspeed_gpio_set_pin_level(s, set_idx, pin, level);
|
|
}
|
|
|
|
/****************** Setup functions ******************/
|
|
static const GPIOSetProperties ast2400_set_props[] = {
|
|
[0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
|
|
[1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
|
|
[2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
|
|
[3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
|
|
[4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
|
|
[5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
|
|
[6] = {0x0000000f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} },
|
|
};
|
|
|
|
static const GPIOSetProperties ast2500_set_props[] = {
|
|
[0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
|
|
[1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
|
|
[2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
|
|
[3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
|
|
[4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
|
|
[5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
|
|
[6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} },
|
|
[7] = {0x000000ff, 0x000000ff, {"AC"} },
|
|
};
|
|
|
|
static GPIOSetProperties ast2600_3_6v_set_props[] = {
|
|
[0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
|
|
[1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
|
|
[2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
|
|
[3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
|
|
[4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
|
|
[5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
|
|
[6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} },
|
|
};
|
|
|
|
static GPIOSetProperties ast2600_1_8v_set_props[] = {
|
|
[0] = {0xffffffff, 0xffffffff, {"18A", "18B", "18C", "18D"} },
|
|
[1] = {0x0000000f, 0x0000000f, {"18E"} },
|
|
};
|
|
|
|
static const MemoryRegionOps aspeed_gpio_ops = {
|
|
.read = aspeed_gpio_read,
|
|
.write = aspeed_gpio_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
.valid.min_access_size = 4,
|
|
.valid.max_access_size = 4,
|
|
};
|
|
|
|
static void aspeed_gpio_reset(DeviceState *dev)
|
|
{
|
|
AspeedGPIOState *s = ASPEED_GPIO(dev);
|
|
|
|
/* TODO: respect the reset tolerance registers */
|
|
memset(s->sets, 0, sizeof(s->sets));
|
|
}
|
|
|
|
static void aspeed_gpio_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
AspeedGPIOState *s = ASPEED_GPIO(dev);
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
|
|
int pin;
|
|
|
|
/* Interrupt parent line */
|
|
sysbus_init_irq(sbd, &s->irq);
|
|
|
|
/* Individual GPIOs */
|
|
for (pin = 0; pin < agc->nr_gpio_pins; pin++) {
|
|
sysbus_init_irq(sbd, &s->gpios[pin]);
|
|
}
|
|
|
|
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s,
|
|
TYPE_ASPEED_GPIO, GPIO_MAX_MEM_SIZE);
|
|
|
|
sysbus_init_mmio(sbd, &s->iomem);
|
|
}
|
|
|
|
static void aspeed_gpio_init(Object *obj)
|
|
{
|
|
AspeedGPIOState *s = ASPEED_GPIO(obj);
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
|
|
int pin;
|
|
|
|
for (pin = 0; pin < agc->nr_gpio_pins; pin++) {
|
|
char *name;
|
|
int set_idx = pin / GPIOS_PER_SET;
|
|
int pin_idx = aspeed_adjust_pin(s, pin) - (set_idx * GPIOS_PER_SET);
|
|
int group_idx = pin_idx >> GPIO_GROUP_SHIFT;
|
|
const GPIOSetProperties *props = &agc->props[set_idx];
|
|
|
|
name = g_strdup_printf("gpio%s%d", props->group_label[group_idx],
|
|
pin_idx % GPIOS_PER_GROUP);
|
|
object_property_add(obj, name, "bool", aspeed_gpio_get_pin,
|
|
aspeed_gpio_set_pin, NULL, NULL);
|
|
g_free(name);
|
|
}
|
|
}
|
|
|
|
static const VMStateDescription vmstate_gpio_regs = {
|
|
.name = TYPE_ASPEED_GPIO"/regs",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32(data_value, GPIOSets),
|
|
VMSTATE_UINT32(data_read, GPIOSets),
|
|
VMSTATE_UINT32(direction, GPIOSets),
|
|
VMSTATE_UINT32(int_enable, GPIOSets),
|
|
VMSTATE_UINT32(int_sens_0, GPIOSets),
|
|
VMSTATE_UINT32(int_sens_1, GPIOSets),
|
|
VMSTATE_UINT32(int_sens_2, GPIOSets),
|
|
VMSTATE_UINT32(int_status, GPIOSets),
|
|
VMSTATE_UINT32(reset_tol, GPIOSets),
|
|
VMSTATE_UINT32(cmd_source_0, GPIOSets),
|
|
VMSTATE_UINT32(cmd_source_1, GPIOSets),
|
|
VMSTATE_UINT32(debounce_1, GPIOSets),
|
|
VMSTATE_UINT32(debounce_2, GPIOSets),
|
|
VMSTATE_UINT32(input_mask, GPIOSets),
|
|
VMSTATE_END_OF_LIST(),
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription vmstate_aspeed_gpio = {
|
|
.name = TYPE_ASPEED_GPIO,
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_STRUCT_ARRAY(sets, AspeedGPIOState, ASPEED_GPIO_MAX_NR_SETS,
|
|
1, vmstate_gpio_regs, GPIOSets),
|
|
VMSTATE_UINT32_ARRAY(debounce_regs, AspeedGPIOState,
|
|
ASPEED_GPIO_NR_DEBOUNCE_REGS),
|
|
VMSTATE_END_OF_LIST(),
|
|
}
|
|
};
|
|
|
|
static void aspeed_gpio_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->realize = aspeed_gpio_realize;
|
|
dc->reset = aspeed_gpio_reset;
|
|
dc->desc = "Aspeed GPIO Controller";
|
|
dc->vmsd = &vmstate_aspeed_gpio;
|
|
}
|
|
|
|
static void aspeed_gpio_ast2400_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
|
|
|
|
agc->props = ast2400_set_props;
|
|
agc->nr_gpio_pins = 216;
|
|
agc->nr_gpio_sets = 7;
|
|
agc->gap = 196;
|
|
agc->reg_table = aspeed_3_6v_gpios;
|
|
}
|
|
|
|
static void aspeed_gpio_2500_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
|
|
|
|
agc->props = ast2500_set_props;
|
|
agc->nr_gpio_pins = 228;
|
|
agc->nr_gpio_sets = 8;
|
|
agc->gap = 220;
|
|
agc->reg_table = aspeed_3_6v_gpios;
|
|
}
|
|
|
|
static void aspeed_gpio_ast2600_3_6v_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
|
|
|
|
agc->props = ast2600_3_6v_set_props;
|
|
agc->nr_gpio_pins = 208;
|
|
agc->nr_gpio_sets = 7;
|
|
agc->reg_table = aspeed_3_6v_gpios;
|
|
}
|
|
|
|
static void aspeed_gpio_ast2600_1_8v_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
|
|
|
|
agc->props = ast2600_1_8v_set_props;
|
|
agc->nr_gpio_pins = 36;
|
|
agc->nr_gpio_sets = 2;
|
|
agc->reg_table = aspeed_1_8v_gpios;
|
|
}
|
|
|
|
static const TypeInfo aspeed_gpio_info = {
|
|
.name = TYPE_ASPEED_GPIO,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(AspeedGPIOState),
|
|
.class_size = sizeof(AspeedGPIOClass),
|
|
.class_init = aspeed_gpio_class_init,
|
|
.abstract = true,
|
|
};
|
|
|
|
static const TypeInfo aspeed_gpio_ast2400_info = {
|
|
.name = TYPE_ASPEED_GPIO "-ast2400",
|
|
.parent = TYPE_ASPEED_GPIO,
|
|
.class_init = aspeed_gpio_ast2400_class_init,
|
|
.instance_init = aspeed_gpio_init,
|
|
};
|
|
|
|
static const TypeInfo aspeed_gpio_ast2500_info = {
|
|
.name = TYPE_ASPEED_GPIO "-ast2500",
|
|
.parent = TYPE_ASPEED_GPIO,
|
|
.class_init = aspeed_gpio_2500_class_init,
|
|
.instance_init = aspeed_gpio_init,
|
|
};
|
|
|
|
static const TypeInfo aspeed_gpio_ast2600_3_6v_info = {
|
|
.name = TYPE_ASPEED_GPIO "-ast2600",
|
|
.parent = TYPE_ASPEED_GPIO,
|
|
.class_init = aspeed_gpio_ast2600_3_6v_class_init,
|
|
.instance_init = aspeed_gpio_init,
|
|
};
|
|
|
|
static const TypeInfo aspeed_gpio_ast2600_1_8v_info = {
|
|
.name = TYPE_ASPEED_GPIO "-ast2600-1_8v",
|
|
.parent = TYPE_ASPEED_GPIO,
|
|
.class_init = aspeed_gpio_ast2600_1_8v_class_init,
|
|
.instance_init = aspeed_gpio_init,
|
|
};
|
|
|
|
static void aspeed_gpio_register_types(void)
|
|
{
|
|
type_register_static(&aspeed_gpio_info);
|
|
type_register_static(&aspeed_gpio_ast2400_info);
|
|
type_register_static(&aspeed_gpio_ast2500_info);
|
|
type_register_static(&aspeed_gpio_ast2600_3_6v_info);
|
|
type_register_static(&aspeed_gpio_ast2600_1_8v_info);
|
|
}
|
|
|
|
type_init(aspeed_gpio_register_types);
|