historical/m0-applesillicon.git/xnu-qemu-arm64-5.1.0/roms/edk2/ArmPkg/Drivers/ArmScmiDxe/ScmiPrivate.h
2024-01-16 11:20:27 -06:00

168 lines
4.9 KiB
C

/** @file
Copyright (c) 2017-2018, Arm Limited. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
System Control and Management Interface V1.0
http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/
DEN0056A_System_Control_and_Management_Interface.pdf
**/
#ifndef SCMI_PRIVATE_H_
#define SCMI_PRIVATE_H_
// SCMI protocol IDs.
typedef enum {
SCMI_PROTOCOL_ID_BASE = 0x10,
SCMI_PROTOCOL_ID_POWER_DOMAIN = 0x11,
SCMI_PROTOCOL_ID_SYSTEM_POWER = 0x12,
SCMI_PROTOCOL_ID_PERFORMANCE = 0x13,
SCMI_PROTOCOL_ID_CLOCK = 0x14,
SCMI_PROTOCOL_ID_SENSOR = 0x15
} SCMI_PROTOCOL_ID;
// SCMI message types.
typedef enum {
SCMI_MESSAGE_TYPE_COMMAND = 0,
SCMI_MESSAGE_TYPE_DELAYED_RESPONSE = 2, // Skipping 1 is deliberate.
SCMI_MESSAGE_TYPE_NOTIFICATION = 3
} SCMI_MESSAGE_TYPE;
// SCMI response error codes.
typedef enum {
SCMI_SUCCESS = 0,
SCMI_NOT_SUPPORTED = -1,
SCMI_INVALID_PARAMETERS = -2,
SCMI_DENIED = -3,
SCMI_NOT_FOUND = -4,
SCMI_OUT_OF_RANGE = -5,
SCMI_BUSY = -6,
SCMI_COMMS_ERROR = -7,
SCMI_GENERIC_ERROR = -8,
SCMI_HARDWARE_ERROR = -9,
SCMI_PROTOCOL_ERROR = -10
} SCMI_STATUS;
// SCMI message IDs common to all protocols.
typedef enum {
SCMI_MESSAGE_ID_PROTOCOL_VERSION = 0x0,
SCMI_MESSAGE_ID_PROTOCOL_ATTRIBUTES = 0x1,
SCMI_MESSAGE_ID_PROTOCOL_MESSAGE_ATTRIBUTES = 0x2
} SCMI_MESSAGE_ID;
// Not defined in SCMI specification but will help to identify a message.
typedef struct {
SCMI_PROTOCOL_ID ProtocolId;
UINT32 MessageId;
} SCMI_COMMAND;
#pragma pack(1)
// Response to a SCMI command.
typedef struct {
INT32 Status;
UINT32 ReturnValues[];
} SCMI_MESSAGE_RESPONSE;
// Message header. MsgId[7:0], MsgType[9:8], ProtocolId[17:10]
#define MESSAGE_TYPE_SHIFT 8
#define PROTOCOL_ID_SHIFT 10
#define SCMI_MESSAGE_HEADER(MsgId, MsgType, ProtocolId) ( \
MsgType << MESSAGE_TYPE_SHIFT | \
ProtocolId << PROTOCOL_ID_SHIFT | \
MsgId \
)
// SCMI message header.
typedef struct {
UINT32 MessageHeader;
} SCMI_MESSAGE_HEADER;
#pragma pack()
/** Return a pointer to the message payload.
@param[out] Payload Holds pointer to the message payload.
@retval EFI_SUCCESS Payload holds a valid message payload pointer.
@retval EFI_TIMEOUT Time out error if MTL channel is busy.
@retval EFI_UNSUPPORTED If MTL channel is unsupported.
**/
EFI_STATUS
ScmiCommandGetPayload (
OUT UINT32** Payload
);
/** Execute a SCMI command and receive a response.
This function uses a MTL channel to transfer message to SCP
and waits for a response.
@param[in] Command Pointer to the SCMI command (Protocol ID
and Message ID)
@param[in,out] PayloadLength SCMI command message length.
@param[out] OPTIONAL ReturnValues Pointer to SCMI response.
@retval OUT EFI_SUCCESS Command sent and message received successfully.
@retval OUT EFI_UNSUPPORTED Channel not supported.
@retval OUT EFI_TIMEOUT Timeout on the channel.
@retval OUT EFI_DEVICE_ERROR Channel not ready.
@retval OUT EFI_DEVICE_ERROR Message Header corrupted.
@retval OUT EFI_DEVICE_ERROR SCMI error.
**/
EFI_STATUS
ScmiCommandExecute (
IN SCMI_COMMAND *Command,
IN OUT UINT32 *PayloadLength,
OUT UINT32 **ReturnValues OPTIONAL
);
/** Return protocol version from SCP for a given protocol ID.
@param[in] Protocol ID Protocol ID.
@param[out] Version Pointer to version of the protocol.
@retval EFI_SUCCESS Version holds a valid version received
from the SCP.
@retval EFI_DEVICE_ERROR SCMI error.
@retval !(EFI_SUCCESS) Other errors.
**/
EFI_STATUS
ScmiGetProtocolVersion (
IN SCMI_PROTOCOL_ID ProtocolId,
OUT UINT32 *Version
);
/** Return protocol attributes from SCP for a given protocol ID.
@param[in] Protocol ID Protocol ID.
@param[out] ReturnValues Pointer to attributes of the protocol.
@retval EFI_SUCCESS ReturnValues points to protocol attributes.
@retval EFI_DEVICE_ERROR SCMI error.
@retval !(EFI_SUCCESS) Other errors.
**/
EFI_STATUS
ScmiGetProtocolAttributes (
IN SCMI_PROTOCOL_ID ProtocolId,
OUT UINT32 **ReturnValues
);
/** Return protocol message attributes from SCP for a given protocol ID.
@param[in] Protocol ID Protocol ID.
@param[out] Attributes Pointer to attributes of the protocol.
@retval EFI_SUCCESS ReturnValues points to protocol message attributes.
@retval EFI_DEVICE_ERROR SCMI error.
@retval !(EFI_SUCCESS) Other errors.
**/
EFI_STATUS
ScmiGetProtocolMessageAttributes (
IN SCMI_PROTOCOL_ID ProtocolId,
OUT UINT32 **ReturnValues
);
#endif /* SCMI_PRIVATE_H_ */