Sneed-Group/historical
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
historical/m0-applesillicon.git/xnu-qemu-arm64-5.1.0/roms/skiboot/hw/phb3.c
ThatLinuxFan 4061214e6a phht hahahahaah
2024-01-16 11:20:27 -06:00

5071 lines
148 KiB
C
Raw Blame History

/* Copyright 2013-2014 IBM Corp.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
* implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <skiboot.h>
#include <io.h>
#include <timebase.h>
#include <pci-cfg.h>
#include <pci.h>
#include <pci-slot.h>
#include <vpd.h>
#include <interrupts.h>
#include <opal.h>
#include <cpu.h>
#include <device.h>
#include <ccan/str/str.h>
#include <ccan/array_size/array_size.h>
#include <xscom.h>
#include <affinity.h>
#include <phb3.h>
#include <phb3-regs.h>
#include <phb3-capp.h>
#include <capp.h>
#include <fsp.h>
#include <chip.h>
#include <chiptod.h>
/* Enable this to disable error interrupts for debug purposes */
#undef DISABLE_ERR_INTS
static void phb3_init_hw(struct phb3 *p, bool first_init);
#define PHBDBG(p, fmt, a...) prlog(PR_DEBUG, "PHB#%04x: " fmt, \
(p)->phb.opal_id, ## a)
#define PHBINF(p, fmt, a...) prlog(PR_INFO, "PHB#%04x: " fmt, \
(p)->phb.opal_id, ## a)
#define PHBERR(p, fmt, a...) prlog(PR_ERR, "PHB#%04x: " fmt, \
(p)->phb.opal_id, ## a)
#define PE_CAPP_EN 0x9013c03
#define PE_REG_OFFSET(p) \
((PHB3_IS_NAPLES(p) && (p)->index) ? 0x40 : 0x0)
/* Helper to select an IODA table entry */
static inline void phb3_ioda_sel(struct phb3 *p, uint32_t table,
uint32_t addr, bool autoinc)
{
out_be64(p->regs + PHB_IODA_ADDR,
(autoinc ? PHB_IODA_AD_AUTOINC : 0) |
SETFIELD(PHB_IODA_AD_TSEL, 0ul, table) |
SETFIELD(PHB_IODA_AD_TADR, 0ul, addr));
}
static void phb3_eeh_dump_regs(struct phb3 *p,
struct OpalIoPhb3ErrorData *regs);
/* Check if AIB is fenced via PBCQ NFIR */
static bool phb3_fenced(struct phb3 *p)
{
uint64_t nfir;
/* We still probably has crazy xscom */
xscom_read(p->chip_id, p->pe_xscom + 0x0, &nfir);
if (nfir & PPC_BIT(16)) {
p->flags |= PHB3_AIB_FENCED;
phb3_eeh_dump_regs(p, NULL);
return true;
}
return false;
}
static int64_t phb3_pcicfg_rc_pref_window(void *dev __unused,
struct pci_cfg_reg_filter *pcrf,
uint32_t offset, uint32_t len,
uint32_t *data, bool write)
{
uint8_t *pdata;
uint32_t i;
/* Cache whatever we received */
if (write) {
pdata = &pcrf->data[offset - pcrf->start];
for (i = 0; i < len; i++, pdata++)
*pdata = (uint8_t)(*data >> (8 * i));
return OPAL_SUCCESS;
}
/* Return whatever we cached */
*data = 0;
pdata = &pcrf->data[offset - pcrf->start + len - 1];
for (i = len; i > 0; i--, pdata--) {
*data = (*data) << 8;
if (offset + i == PCI_CFG_PREF_MEM_BASE) {
*data |= ((*pdata & 0xf0) | 0x1);
continue;
}
*data |= *pdata;
}
return OPAL_SUCCESS;
}
/*
* Configuration space access
*
* The PHB lock is assumed to be already held
*/
static int64_t phb3_pcicfg_check(struct phb3 *p, uint32_t bdfn,
uint32_t offset, uint32_t size,
uint8_t *pe)
{
uint32_t sm = size - 1;
if (offset > 0xfff || bdfn > 0xffff)
return OPAL_PARAMETER;
if (offset & sm)
return OPAL_PARAMETER;
/* The root bus only has a device at 0 and we get into an
* error state if we try to probe beyond that, so let's
* avoid that and just return an error to Linux
*/
if ((bdfn >> 8) == 0 && (bdfn & 0xff))
return OPAL_HARDWARE;
/* Check PHB state */
if (p->broken)
return OPAL_HARDWARE;
/* Fetch the PE# from cache */
*pe = p->rte_cache[bdfn];
return OPAL_SUCCESS;
}
static void phb3_link_update(struct phb *phb, uint16_t data)
{
struct phb3 *p = phb_to_phb3(phb);
uint32_t new_spd, new_wid;
uint32_t old_spd, old_wid;
uint16_t old_data;
uint64_t lreg;
int i;
/* Read the old speed and width */
pci_cfg_read16(phb, 0, 0x5a, &old_data);
/* Decode the register values */
new_spd = data & PCICAP_EXP_LSTAT_SPEED;
new_wid = (data & PCICAP_EXP_LSTAT_WIDTH) >> 4;
old_spd = old_data & PCICAP_EXP_LSTAT_SPEED;
old_wid = (old_data & PCICAP_EXP_LSTAT_WIDTH) >> 4;
/* Apply maximums */
if (new_wid > 16)
new_wid = 16;
if (new_wid < 1)
new_wid = 1;
if (new_spd > 3)
new_spd = 3;
if (new_spd < 1)
new_spd = 1;
PHBINF(p, "Link change request: speed %d->%d, width %d->%d\n",
old_spd, new_spd, old_wid, new_wid);
/* Check if width needs to be changed */
if (old_wid != new_wid) {
PHBINF(p, "Changing width...\n");
lreg = in_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT);
lreg = SETFIELD(PHB_PCIE_LM_TGT_LINK_WIDTH, lreg, new_wid);
lreg |= PHB_PCIE_LM_CHG_LINK_WIDTH;
out_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT, lreg);
for (i=0; i<10;i++) {
lreg = in_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT);
if (lreg & PHB_PCIE_LM_DL_WCHG_PENDING)
break;
time_wait_ms_nopoll(1);
}
if (!(lreg & PHB_PCIE_LM_DL_WCHG_PENDING))
PHBINF(p, "Timeout waiting for speed change start\n");
for (i=0; i<100;i++) {
lreg = in_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT);
if (!(lreg & PHB_PCIE_LM_DL_WCHG_PENDING))
break;
time_wait_ms_nopoll(1);
}
if (lreg & PHB_PCIE_LM_DL_WCHG_PENDING)
PHBINF(p, "Timeout waiting for speed change end\n");
}
/* Check if speed needs to be changed */
if (old_spd != new_spd) {
PHBINF(p, "Changing speed...\n");
lreg = in_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT);
if (lreg & PPC_BIT(19)) {
uint16_t lctl2;
PHBINF(p, " Bit19 set ! working around...\n");
pci_cfg_read16(phb, 0, 0x78, &lctl2);
PHBINF(p, " LCTL2=%04x\n", lctl2);
lctl2 &= ~PCICAP_EXP_LCTL2_HWAUTSPDIS;
pci_cfg_write16(phb, 0, 0x78, lctl2);
}
lreg = in_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT);
lreg = SETFIELD(PHB_PCIE_LM_TGT_SPEED, lreg, new_spd);
lreg |= PHB_PCIE_LM_CHG_SPEED;
out_be64(p->regs + PHB_PCIE_LINK_MANAGEMENT, lreg);
}
}
static int64_t phb3_pcicfg_rc_link_speed(void *dev,
struct pci_cfg_reg_filter *pcrf __unused,
uint32_t offset, uint32_t len,
uint32_t *data, bool write)
{
struct pci_device *pd = dev;
/* Hack for link speed changes. We intercept attempts at writing
* the link control/status register
*/
if (write && len == 4 && offset == 0x58) {
phb3_link_update(pd->phb, (*data) >> 16);
return OPAL_SUCCESS;
}
if (write && len == 2 && offset == 0x5a) {
phb3_link_update(pd->phb, *(uint16_t *)data);
return OPAL_SUCCESS;
}
return OPAL_PARTIAL;
}
#define PHB3_PCI_CFG_READ(size, type) \
static int64_t phb3_pcicfg_read##size(struct phb *phb, uint32_t bdfn, \
uint32_t offset, type *data) \
{ \
struct phb3 *p = phb_to_phb3(phb); \
uint64_t addr, val64; \
int64_t rc; \
uint8_t pe; \
bool use_asb = false; \
\
/* Initialize data in case of error */ \
*data = (type)0xffffffff; \
\
rc = phb3_pcicfg_check(p, bdfn, offset, sizeof(type), &pe); \
if (rc) \
return rc; \
\
if (p->flags & PHB3_AIB_FENCED) { \
if (!(p->flags & PHB3_CFG_USE_ASB)) \
return OPAL_HARDWARE; \
use_asb = true; \
} else if ((p->flags & PHB3_CFG_BLOCKED) && bdfn != 0) { \
return OPAL_HARDWARE; \
} \
\
rc = pci_handle_cfg_filters(phb, bdfn, offset, sizeof(type), \
(uint32_t *)data, false); \
if (rc != OPAL_PARTIAL) \
return rc; \
\
addr = PHB_CA_ENABLE; \
addr = SETFIELD(PHB_CA_BDFN, addr, bdfn); \
addr = SETFIELD(PHB_CA_REG, addr, offset); \
addr = SETFIELD(PHB_CA_PE, addr, pe); \
if (use_asb) { \
phb3_write_reg_asb(p, PHB_CONFIG_ADDRESS, addr); \
sync(); \
val64 = bswap_64(phb3_read_reg_asb(p, PHB_CONFIG_DATA)); \
*data = (type)(val64 >> (8 * (offset & (4 - sizeof(type))))); \
} else { \
out_be64(p->regs + PHB_CONFIG_ADDRESS, addr); \
*data = in_le##size(p->regs + PHB_CONFIG_DATA + \
(offset & (4 - sizeof(type)))); \
} \
\
return OPAL_SUCCESS; \
}
#define PHB3_PCI_CFG_WRITE(size, type) \
static int64_t phb3_pcicfg_write##size(struct phb *phb, uint32_t bdfn, \
uint32_t offset, type data) \
{ \
struct phb3 *p = phb_to_phb3(phb); \
uint64_t addr, val64 = 0; \
int64_t rc; \
uint8_t pe; \
bool use_asb = false; \
\
rc = phb3_pcicfg_check(p, bdfn, offset, sizeof(type), &pe); \
if (rc) \
return rc; \
\
if (p->flags & PHB3_AIB_FENCED) { \
if (!(p->flags & PHB3_CFG_USE_ASB)) \
return OPAL_HARDWARE; \
use_asb = true; \
} else if ((p->flags & PHB3_CFG_BLOCKED) && bdfn != 0) { \
return OPAL_HARDWARE; \
} \
\
rc = pci_handle_cfg_filters(phb, bdfn, offset, sizeof(type), \
(uint32_t *)&data, true); \
if (rc != OPAL_PARTIAL) \
return rc; \
\
addr = PHB_CA_ENABLE; \
addr = SETFIELD(PHB_CA_BDFN, addr, bdfn); \
addr = SETFIELD(PHB_CA_REG, addr, offset); \
addr = SETFIELD(PHB_CA_PE, addr, pe); \
if (use_asb) { \
val64 = data; \
val64 = bswap_64(val64 << 8 * (offset & (4 - sizeof(type)))); \
phb3_write_reg_asb(p, PHB_CONFIG_ADDRESS, addr); \
sync(); \
phb3_write_reg_asb(p, PHB_CONFIG_DATA, val64); \
} else { \
out_be64(p->regs + PHB_CONFIG_ADDRESS, addr); \
out_le##size(p->regs + PHB_CONFIG_DATA + \
(offset & (4 - sizeof(type))), data); \
} \
\
return OPAL_SUCCESS; \
}
PHB3_PCI_CFG_READ(8, u8)
PHB3_PCI_CFG_READ(16, u16)
PHB3_PCI_CFG_READ(32, u32)
PHB3_PCI_CFG_WRITE(8, u8)
PHB3_PCI_CFG_WRITE(16, u16)
PHB3_PCI_CFG_WRITE(32, u32)
static uint8_t phb3_choose_bus(struct phb *phb __unused,
struct pci_device *bridge __unused,
uint8_t candidate, uint8_t *max_bus __unused,
bool *use_max)
{
/* Use standard bus number selection */
*use_max = false;
return candidate;
}
static int64_t phb3_get_reserved_pe_number(struct phb *phb __unused)
{
return PHB3_RESERVED_PE_NUM;
}
static inline void phb3_enable_ecrc(struct phb *phb, bool enable)
{
struct phb3 *p = phb_to_phb3(phb);
uint32_t ctl;
if (p->aercap <= 0)
return;
pci_cfg_read32(phb, 0, p->aercap + PCIECAP_AER_CAPCTL, &ctl);
if (enable) {
ctl |= (PCIECAP_AER_CAPCTL_ECRCG_EN |
PCIECAP_AER_CAPCTL_ECRCC_EN);
} else {
ctl &= ~(PCIECAP_AER_CAPCTL_ECRCG_EN |
PCIECAP_AER_CAPCTL_ECRCC_EN);
}
pci_cfg_write32(phb, 0, p->aercap + PCIECAP_AER_CAPCTL, ctl);
}
static void phb3_root_port_init(struct phb *phb, struct pci_device *dev,
int ecap, int aercap)
{
struct phb3 *p = phb_to_phb3(phb);
uint16_t bdfn = dev->bdfn;
uint16_t val16;
uint32_t val32;
/* Use PHB's callback so that the UTL events will be masked
* or unmasked when the link is down or up.
*/
if (dev->slot && dev->slot->ops.prepare_link_change &&
phb->slot && phb->slot->ops.prepare_link_change)
dev->slot->ops.prepare_link_change =
phb->slot->ops.prepare_link_change;
/* Mask UTL link down event if root slot supports surprise
* hotplug as the event should be handled by hotplug driver
* instead of EEH subsystem.
*/
if (dev->slot && dev->slot->surprise_pluggable)
out_be64(p->regs + UTL_PCIE_PORT_IRQ_EN, 0xad42800000000000UL);
/* Enable SERR and parity checking */
pci_cfg_read16(phb, bdfn, PCI_CFG_CMD, &val16);
val16 |= (PCI_CFG_CMD_SERR_EN | PCI_CFG_CMD_PERR_RESP);
pci_cfg_write16(phb, bdfn, PCI_CFG_CMD, val16);
/* Enable reporting various errors */
if (!ecap) return;
pci_cfg_read16(phb, bdfn, ecap + PCICAP_EXP_DEVCTL, &val16);
val16 |= (PCICAP_EXP_DEVCTL_CE_REPORT |
PCICAP_EXP_DEVCTL_NFE_REPORT |
PCICAP_EXP_DEVCTL_FE_REPORT |
PCICAP_EXP_DEVCTL_UR_REPORT);
pci_cfg_write16(phb, bdfn, ecap + PCICAP_EXP_DEVCTL, val16);
if (!aercap) return;
/* Mask various unrecoverable errors. The link surprise down
* event should be masked when its PCI slot support surprise
* hotplug. The link surprise down event should be handled by
* PCI hotplug driver instead of EEH subsystem.
*/
pci_cfg_read32(phb, bdfn, aercap + PCIECAP_AER_UE_MASK, &val32);
val32 |= (PCIECAP_AER_UE_MASK_POISON_TLP |
PCIECAP_AER_UE_MASK_COMPL_TIMEOUT |
PCIECAP_AER_UE_MASK_COMPL_ABORT |
PCIECAP_AER_UE_MASK_ECRC);
if (dev->slot && dev->slot->surprise_pluggable)
val32 |= PCIECAP_AER_UE_MASK_SURPRISE_DOWN;
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_UE_MASK, val32);
/* Report various unrecoverable errors as fatal errors */
pci_cfg_read32(phb, bdfn, aercap + PCIECAP_AER_UE_SEVERITY, &val32);
val32 |= (PCIECAP_AER_UE_SEVERITY_DLLP |
PCIECAP_AER_UE_SEVERITY_SURPRISE_DOWN |
PCIECAP_AER_UE_SEVERITY_FLOW_CTL_PROT |
PCIECAP_AER_UE_SEVERITY_UNEXP_COMPL |
PCIECAP_AER_UE_SEVERITY_RECV_OVFLOW |
PCIECAP_AER_UE_SEVERITY_MALFORMED_TLP);
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_UE_SEVERITY, val32);
/* Mask various recoverable errors */
pci_cfg_read32(phb, bdfn, aercap + PCIECAP_AER_CE_MASK, &val32);
val32 |= PCIECAP_AER_CE_MASK_ADV_NONFATAL;
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_CE_MASK, val32);
/* Enable ECRC check */
phb3_enable_ecrc(phb, true);
/* Enable all error reporting */
pci_cfg_read32(phb, bdfn, aercap + PCIECAP_AER_RERR_CMD, &val32);
val32 |= (PCIECAP_AER_RERR_CMD_FE |
PCIECAP_AER_RERR_CMD_NFE |
PCIECAP_AER_RERR_CMD_CE);
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_RERR_CMD, val32);
}
static void phb3_switch_port_init(struct phb *phb,
struct pci_device *dev,
int ecap, int aercap)
{
struct phb3 *p = phb_to_phb3(phb);
uint16_t bdfn = dev->bdfn;
uint16_t val16;
uint32_t val32;
/* Enable SERR and parity checking and disable INTx */
pci_cfg_read16(phb, bdfn, PCI_CFG_CMD, &val16);
val16 |= (PCI_CFG_CMD_PERR_RESP |
PCI_CFG_CMD_SERR_EN |
PCI_CFG_CMD_INTx_DIS);
pci_cfg_write16(phb, bdfn, PCI_CFG_CMD, val16);
/* Disable partity error and enable system error */
pci_cfg_read16(phb, bdfn, PCI_CFG_BRCTL, &val16);
val16 &= ~PCI_CFG_BRCTL_PERR_RESP_EN;
val16 |= PCI_CFG_BRCTL_SERR_EN;
pci_cfg_write16(phb, bdfn, PCI_CFG_BRCTL, val16);
/* Enable reporting various errors */
if (!ecap) return;
pci_cfg_read16(phb, bdfn, ecap + PCICAP_EXP_DEVCTL, &val16);
val16 |= (PCICAP_EXP_DEVCTL_CE_REPORT |
PCICAP_EXP_DEVCTL_NFE_REPORT |
PCICAP_EXP_DEVCTL_FE_REPORT);
/* HW279570 - Disable reporting of correctable errors */
val16 &= ~PCICAP_EXP_DEVCTL_CE_REPORT;
pci_cfg_write16(phb, bdfn, ecap + PCICAP_EXP_DEVCTL, val16);
/* Unmask all unrecoverable errors for upstream port. For
* downstream port, the surprise link down is masked because
* it should be handled by hotplug driver instead of EEH
* subsystem.
*/
if (!aercap) return;
if (dev->dev_type == PCIE_TYPE_SWITCH_DNPORT &&
dev->slot && dev->slot->surprise_pluggable)
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_UE_MASK,
PCIECAP_AER_UE_MASK_SURPRISE_DOWN);
else
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_UE_MASK, 0x0);
/* Severity of unrecoverable errors */
if (dev->dev_type == PCIE_TYPE_SWITCH_UPPORT)
val32 = (PCIECAP_AER_UE_SEVERITY_DLLP |
PCIECAP_AER_UE_SEVERITY_SURPRISE_DOWN |
PCIECAP_AER_UE_SEVERITY_FLOW_CTL_PROT |
PCIECAP_AER_UE_SEVERITY_RECV_OVFLOW |
PCIECAP_AER_UE_SEVERITY_MALFORMED_TLP |
PCIECAP_AER_UE_SEVERITY_INTERNAL);
else
val32 = (PCIECAP_AER_UE_SEVERITY_FLOW_CTL_PROT |
PCIECAP_AER_UE_SEVERITY_INTERNAL);
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_UE_SEVERITY, val32);
/*
* Mask various correctable errors
*
* On Murano and Venice DD1.0 we disable emission of corrected
* error messages to the PHB completely to workaround errata
* HW257476 causing the loss of tags.
*/
if (p->rev < PHB3_REV_MURANO_DD20)
val32 = 0xffffffff;
else
val32 = PCIECAP_AER_CE_MASK_ADV_NONFATAL;
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_CE_MASK, val32);
/* Enable ECRC generation and disable ECRC check */
pci_cfg_read32(phb, bdfn, aercap + PCIECAP_AER_CAPCTL, &val32);
val32 |= PCIECAP_AER_CAPCTL_ECRCG_EN;
val32 &= ~PCIECAP_AER_CAPCTL_ECRCC_EN;
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_CAPCTL, val32);
}
static void phb3_endpoint_init(struct phb *phb,
struct pci_device *dev,
int ecap, int aercap)
{
struct phb3 *p = phb_to_phb3(phb);
uint16_t bdfn = dev->bdfn;
uint16_t val16;
uint32_t val32;
/* Enable SERR and parity checking */
pci_cfg_read16(phb, bdfn, PCI_CFG_CMD, &val16);
val16 |= (PCI_CFG_CMD_PERR_RESP |
PCI_CFG_CMD_SERR_EN);
pci_cfg_write16(phb, bdfn, PCI_CFG_CMD, val16);
/* Enable reporting various errors */
if (!ecap) return;
pci_cfg_read16(phb, bdfn, ecap + PCICAP_EXP_DEVCTL, &val16);
val16 &= ~PCICAP_EXP_DEVCTL_CE_REPORT;
val16 |= (PCICAP_EXP_DEVCTL_NFE_REPORT |
PCICAP_EXP_DEVCTL_FE_REPORT |
PCICAP_EXP_DEVCTL_UR_REPORT);
/* HW279570 - Disable reporting of correctable errors */
val16 &= ~PCICAP_EXP_DEVCTL_CE_REPORT;
pci_cfg_write16(phb, bdfn, ecap + PCICAP_EXP_DEVCTL, val16);
/*
* On Murano and Venice DD1.0 we disable emission of corrected
* error messages to the PHB completely to workaround errata
* HW257476 causing the loss of tags.
*/
if (p->rev < PHB3_REV_MURANO_DD20)
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_CE_MASK,
0xffffffff);
/* Enable ECRC generation and check */
pci_cfg_read32(phb, bdfn, aercap + PCIECAP_AER_CAPCTL, &val32);
val32 |= (PCIECAP_AER_CAPCTL_ECRCG_EN |
PCIECAP_AER_CAPCTL_ECRCC_EN);
pci_cfg_write32(phb, bdfn, aercap + PCIECAP_AER_CAPCTL, val32);
}
static int64_t phb3_pcicfg_no_dstate(void *dev __unused,
struct pci_cfg_reg_filter *pcrf,
uint32_t offset, uint32_t len __unused,
uint32_t *data __unused, bool write)
{
uint32_t loff = offset - pcrf->start;
/* Disable D-state change on children of the PHB. For now we
* simply block all writes to the PM control/status
*/
if (write && loff >= 4 && loff < 6)
return OPAL_SUCCESS;
return OPAL_PARTIAL;
}
static void phb3_check_device_quirks(struct phb *phb, struct pci_device *dev)
{
struct phb3 *p = phb_to_phb3(phb);
if (dev->primary_bus != 0 &&
dev->primary_bus != 1)
return;
if (dev->primary_bus == 1) {
u64 modectl;
/*
* For these adapters, if they are directly under the PHB, we
* adjust the disable_wr_scope_group bit for performances
*
* 15b3:1003 Mellanox Travis3-EN (CX3)
* 15b3:1011 Mellanox HydePark (ConnectIB)
* 15b3:1013 Mellanox GlacierPark (CX4)
*/
xscom_read(p->chip_id, p->pe_xscom + 0x0b, &modectl);
if (PCI_VENDOR_ID(dev->vdid) == 0x15b3 &&
(PCI_DEVICE_ID(dev->vdid) == 0x1003 ||
PCI_DEVICE_ID(dev->vdid) == 0x1011 ||
PCI_DEVICE_ID(dev->vdid) == 0x1013))
modectl |= PPC_BIT(14);
else
modectl &= ~PPC_BIT(14);
xscom_write(p->chip_id, p->pe_xscom + 0x0b, modectl);
/*
* Naples has a problem with D-states at least on Mellanox CX4,
* disable changing D-state on Naples like we do it for PHB4.
*/
if (PHB3_IS_NAPLES(p) &&
pci_has_cap(dev, PCI_CFG_CAP_ID_PM, false)) {
pci_add_cfg_reg_filter(dev,
pci_cap(dev, PCI_CFG_CAP_ID_PM, false),
8,
PCI_REG_FLAG_WRITE,
phb3_pcicfg_no_dstate);
}
} else if (dev->primary_bus == 0) {
/*
* Emulate the prefetchable window of the root port
* when the corresponding HW registers are readonly.
*
* 1014:03dc Root port on P8/P8E/P8NVL
*/
if (PCI_VENDOR_ID(dev->vdid) == 0x1014 &&
PCI_DEVICE_ID(dev->vdid) == 0x03dc) {
uint32_t pref_hi, tmp;
pci_cfg_read32(phb, dev->bdfn,
PCI_CFG_PREF_MEM_BASE_U32, &pref_hi);
pci_cfg_write32(phb, dev->bdfn,
PCI_CFG_PREF_MEM_BASE_U32, ~pref_hi);
pci_cfg_read32(phb, dev->bdfn,
PCI_CFG_PREF_MEM_BASE_U32, &tmp);
pci_cfg_write32(phb, dev->bdfn,
PCI_CFG_PREF_MEM_BASE_U32, pref_hi);
if (tmp == pref_hi)
pci_add_cfg_reg_filter(dev,
PCI_CFG_PREF_MEM_BASE_U32, 12,
PCI_REG_FLAG_READ | PCI_REG_FLAG_WRITE,
phb3_pcicfg_rc_pref_window);
/* Add filter to control link speed */
pci_add_cfg_reg_filter(dev,
0x58, 4,
PCI_REG_FLAG_WRITE,
phb3_pcicfg_rc_link_speed);
}
}
}
static inline int phb3_should_disable_ecrc(struct pci_device *pd)
{
/*
* When we have PMC PCIe switch, we need disable ECRC on root port.
* Otherwise, the adapters behind the switch downstream ports might
* not probed successfully.
*/
if (pd->vdid == 0x854611f8)
return true;
return false;
}
static int phb3_device_init(struct phb *phb,
struct pci_device *dev,
void *data)
{
struct phb3 *p = phb_to_phb3(phb);
int ecap, aercap;
/* Some special adapter tweaks for devices directly under the PHB */
phb3_check_device_quirks(phb, dev);
/* Common initialization for the device */
pci_device_init(phb, dev);
ecap = pci_cap(dev, PCI_CFG_CAP_ID_EXP, false);
aercap = pci_cap(dev, PCIECAP_ID_AER, true);
if (dev->dev_type == PCIE_TYPE_ROOT_PORT)
phb3_root_port_init(phb, dev, ecap, aercap);
else if (dev->dev_type == PCIE_TYPE_SWITCH_UPPORT ||
dev->dev_type == PCIE_TYPE_SWITCH_DNPORT)
phb3_switch_port_init(phb, dev, ecap, aercap);
else
phb3_endpoint_init(phb, dev, ecap, aercap);
/*
* Check if we need disable ECRC functionality on root port. It
* only happens when PCI topology changes, meaning it's skipped
* when reinitializing PCI device after EEH reset.
*/
if (!data && phb3_should_disable_ecrc(dev)) {
if (p->no_ecrc_devs++ == 0)
phb3_enable_ecrc(phb, false);
}
return 0;
}
static void phb3_device_remove(struct phb *phb, struct pci_device *pd)
{
struct phb3 *p = phb_to_phb3(phb);
if (!phb3_should_disable_ecrc(pd) || p->no_ecrc_devs == 0)
return;
if (--p->no_ecrc_devs == 0)
phb3_enable_ecrc(phb, true);
}
static int64_t phb3_pci_reinit(struct phb *phb, uint64_t scope, uint64_t data)
{
struct pci_device *pd;
uint16_t bdfn = data;
int ret;
if (scope != OPAL_REINIT_PCI_DEV)
return OPAL_PARAMETER;
pd = pci_find_dev(phb, bdfn);
if (!pd)
return OPAL_PARAMETER;
ret = phb3_device_init(phb, pd, pd);
if (ret)
return OPAL_HARDWARE;
return OPAL_SUCCESS;
}
/* Clear IODA cache tables */
static void phb3_init_ioda_cache(struct phb3 *p)
{
uint32_t i;
uint64_t *data64;
/*
* RTT and PELTV. RTE should be 0xFF's to indicate
* invalid PE# for the corresponding RID.
*
* Note: Instead we set all RTE entries to 0x00 to
* work around a problem where PE lookups might be
* done before Linux has established valid PE's
* (during PCI probing). We can revisit that once/if
* Linux has been fixed to always setup valid PEs.
*
* The value 0x00 corresponds to the default PE# Linux
* uses to check for config space freezes before it
* has assigned PE# to busses.
*
* WARNING: Additionally, we need to be careful, there's
* a HW issue, if we get an MSI on an RTT entry that is
* FF, things will go bad. We need to ensure we don't
* ever let a live FF RTT even temporarily when resetting
* for EEH etc... (HW278969).
*/
for (i = 0; i < ARRAY_SIZE(p->rte_cache); i++)
p->rte_cache[i] = PHB3_RESERVED_PE_NUM;
memset(p->peltv_cache, 0x0, sizeof(p->peltv_cache));
/* Disable all LSI */
for (i = 0; i < ARRAY_SIZE(p->lxive_cache); i++) {
data64 = &p->lxive_cache[i];
*data64 = SETFIELD(IODA2_LXIVT_PRIORITY, 0ul, 0xff);
*data64 = SETFIELD(IODA2_LXIVT_SERVER, *data64, 0x0);
}
/* Diable all MSI */
for (i = 0; i < ARRAY_SIZE(p->ive_cache); i++) {
data64 = &p->ive_cache[i];
*data64 = SETFIELD(IODA2_IVT_PRIORITY, 0ul, 0xff);
*data64 = SETFIELD(IODA2_IVT_SERVER, *data64, 0x0);
}
/* Clear TVT */
memset(p->tve_cache, 0x0, sizeof(p->tve_cache));
/* Clear M32 domain */
memset(p->m32d_cache, 0x0, sizeof(p->m32d_cache));
/* Clear M64 domain */
memset(p->m64b_cache, 0x0, sizeof(p->m64b_cache));
}
/* phb3_ioda_reset - Reset the IODA tables
*
* @purge: If true, the cache is cleared and the cleared values
* are applied to HW. If false, the cached values are
* applied to HW
*
* This reset the IODA tables in the PHB. It is called at
* initialization time, on PHB reset, and can be called
* explicitly from OPAL
*/
static int64_t phb3_ioda_reset(struct phb *phb, bool purge)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t server, prio;
uint64_t *pdata64, data64;
uint32_t i;
if (purge) {
prlog(PR_DEBUG, "PHB%x: Purging all IODA tables...\n",
p->phb.opal_id);
phb3_init_ioda_cache(p);
}
/* Init_27..28 - LIXVT */
phb3_ioda_sel(p, IODA2_TBL_LXIVT, 0, true);
for (i = 0; i < ARRAY_SIZE(p->lxive_cache); i++) {
data64 = p->lxive_cache[i];
server = GETFIELD(IODA2_LXIVT_SERVER, data64);
prio = GETFIELD(IODA2_LXIVT_PRIORITY, data64);
data64 = SETFIELD(IODA2_LXIVT_SERVER, data64, server);
data64 = SETFIELD(IODA2_LXIVT_PRIORITY, data64, prio);
out_be64(p->regs + PHB_IODA_DATA0, data64);
}
/* Init_29..30 - MRT */
phb3_ioda_sel(p, IODA2_TBL_MRT, 0, true);
for (i = 0; i < 8; i++)
out_be64(p->regs + PHB_IODA_DATA0, 0);
/* Init_31..32 - TVT */
phb3_ioda_sel(p, IODA2_TBL_TVT, 0, true);
for (i = 0; i < ARRAY_SIZE(p->tve_cache); i++)
out_be64(p->regs + PHB_IODA_DATA0, p->tve_cache[i]);
/* Init_33..34 - M64BT */
phb3_ioda_sel(p, IODA2_TBL_M64BT, 0, true);
for (i = 0; i < ARRAY_SIZE(p->m64b_cache); i++)
out_be64(p->regs + PHB_IODA_DATA0, p->m64b_cache[i]);
/* Init_35..36 - M32DT */
phb3_ioda_sel(p, IODA2_TBL_M32DT, 0, true);
for (i = 0; i < ARRAY_SIZE(p->m32d_cache); i++)
out_be64(p->regs + PHB_IODA_DATA0, p->m32d_cache[i]);
/* Load RTE, PELTV */
if (p->tbl_rtt)
memcpy((void *)p->tbl_rtt, p->rte_cache, RTT_TABLE_SIZE);
if (p->tbl_peltv)
memcpy((void *)p->tbl_peltv, p->peltv_cache, PELTV_TABLE_SIZE);
/* Load IVT */
if (p->tbl_ivt) {
pdata64 = (uint64_t *)p->tbl_ivt;
for (i = 0; i < IVT_TABLE_ENTRIES; i++)
pdata64[i * IVT_TABLE_STRIDE] = p->ive_cache[i];
}
/* Invalidate RTE, IVE, TCE cache */
out_be64(p->regs + PHB_RTC_INVALIDATE, PHB_RTC_INVALIDATE_ALL);
out_be64(p->regs + PHB_IVC_INVALIDATE, PHB_IVC_INVALIDATE_ALL);
out_be64(p->regs + PHB_TCE_KILL, PHB_TCE_KILL_ALL);
/* Clear RBA */
if (p->rev >= PHB3_REV_MURANO_DD20) {
phb3_ioda_sel(p, IODA2_TBL_RBA, 0, true);
for (i = 0; i < 32; i++)
out_be64(p->regs + PHB_IODA_DATA0, 0x0ul);
}
/* Clear PEST & PEEV */
for (i = 0; i < PHB3_MAX_PE_NUM; i++) {
uint64_t pesta, pestb;
phb3_ioda_sel(p, IODA2_TBL_PESTA, i, false);
pesta = in_be64(p->regs + PHB_IODA_DATA0);
out_be64(p->regs + PHB_IODA_DATA0, 0);
phb3_ioda_sel(p, IODA2_TBL_PESTB, i, false);
pestb = in_be64(p->regs + PHB_IODA_DATA0);
out_be64(p->regs + PHB_IODA_DATA0, 0);
if ((pesta & IODA2_PESTA_MMIO_FROZEN) ||
(pestb & IODA2_PESTB_DMA_STOPPED))
PHBDBG(p, "Frozen PE#%x (%s - %s)\n",
i, (pesta & IODA2_PESTA_MMIO_FROZEN) ? "DMA" : "",
(pestb & IODA2_PESTB_DMA_STOPPED) ? "MMIO" : "");
}
phb3_ioda_sel(p, IODA2_TBL_PEEV, 0, true);
for (i = 0; i < 4; i++)
out_be64(p->regs + PHB_IODA_DATA0, 0);
return OPAL_SUCCESS;
}
/*
* Clear anything we have in PAPR Error Injection registers. Though
* the spec says the PAPR error injection should be one-shot without
* the "sticky" bit. However, that's false according to the experiments
* I had. So we have to clear it at appropriate point in kernel to
* avoid endless frozen PE.
*/
static int64_t phb3_papr_errinjct_reset(struct phb *phb)
{
struct phb3 *p = phb_to_phb3(phb);
out_be64(p->regs + PHB_PAPR_ERR_INJ_CTL, 0x0ul);
out_be64(p->regs + PHB_PAPR_ERR_INJ_ADDR, 0x0ul);
out_be64(p->regs + PHB_PAPR_ERR_INJ_MASK, 0x0ul);
return OPAL_SUCCESS;
}
static int64_t phb3_set_phb_mem_window(struct phb *phb,
uint16_t window_type,
uint16_t window_num,
uint64_t addr,
uint64_t __unused pci_addr,
uint64_t size)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t data64;
/*
* By design, PHB3 doesn't support IODT any more.
* Besides, we can't enable M32 BAR as well. So
* the function is used to do M64 mapping and each
* BAR is supposed to be shared by all PEs.
*/
switch (window_type) {
case OPAL_IO_WINDOW_TYPE:
case OPAL_M32_WINDOW_TYPE:
return OPAL_UNSUPPORTED;
case OPAL_M64_WINDOW_TYPE:
if (window_num >= 16)
return OPAL_PARAMETER;
data64 = p->m64b_cache[window_num];
if (data64 & IODA2_M64BT_SINGLE_PE) {
if ((addr & 0x1FFFFFFul) ||
(size & 0x1FFFFFFul))
return OPAL_PARAMETER;
} else {
if ((addr & 0xFFFFFul) ||
(size & 0xFFFFFul))
return OPAL_PARAMETER;
}
/* size should be 2^N */
if (!size || size & (size-1))
return OPAL_PARAMETER;
/* address should be size aligned */
if (addr & (size - 1))
return OPAL_PARAMETER;
break;
default:
return OPAL_PARAMETER;
}
if (data64 & IODA2_M64BT_SINGLE_PE) {
data64 = SETFIELD(IODA2_M64BT_SINGLE_BASE, data64,
addr >> 25);
data64 = SETFIELD(IODA2_M64BT_SINGLE_MASK, data64,
0x20000000 - (size >> 25));
} else {
data64 = SETFIELD(IODA2_M64BT_BASE, data64,
addr >> 20);
data64 = SETFIELD(IODA2_M64BT_MASK, data64,
0x40000000 - (size >> 20));
}
p->m64b_cache[window_num] = data64;
return OPAL_SUCCESS;
}
/*
* For one specific M64 BAR, it can be shared by all PEs,
* or owned by single PE exclusively.
*/
static int64_t phb3_phb_mmio_enable(struct phb *phb,
uint16_t window_type,
uint16_t window_num,
uint16_t enable)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t data64, base, mask;
/*
* By design, PHB3 doesn't support IODT any more.
* Besides, we can't enable M32 BAR as well. So
* the function is used to do M64 mapping and each
* BAR is supposed to be shared by all PEs.
*/
switch (window_type) {
case OPAL_IO_WINDOW_TYPE:
case OPAL_M32_WINDOW_TYPE:
return OPAL_UNSUPPORTED;
case OPAL_M64_WINDOW_TYPE:
if (window_num >= 16 ||
enable > OPAL_ENABLE_M64_NON_SPLIT)
return OPAL_PARAMETER;
break;
default:
return OPAL_PARAMETER;
}
/*
* We need check the base/mask while enabling
* the M64 BAR. Otherwise, invalid base/mask
* might cause fenced AIB unintentionally
*/
data64 = p->m64b_cache[window_num];
switch (enable) {
case OPAL_DISABLE_M64:
data64 &= ~IODA2_M64BT_SINGLE_PE;
data64 &= ~IODA2_M64BT_ENABLE;
break;
case OPAL_ENABLE_M64_SPLIT:
if (data64 & IODA2_M64BT_SINGLE_PE)
return OPAL_PARAMETER;
base = GETFIELD(IODA2_M64BT_BASE, data64);
base = (base << 20);
mask = GETFIELD(IODA2_M64BT_MASK, data64);
if (base < p->mm0_base || !mask)
return OPAL_PARTIAL;
data64 |= IODA2_M64BT_ENABLE;
break;
case OPAL_ENABLE_M64_NON_SPLIT:
if (!(data64 & IODA2_M64BT_SINGLE_PE))
return OPAL_PARAMETER;
base = GETFIELD(IODA2_M64BT_SINGLE_BASE, data64);
base = (base << 25);
mask = GETFIELD(IODA2_M64BT_SINGLE_MASK, data64);
if (base < p->mm0_base || !mask)
return OPAL_PARTIAL;
data64 |= IODA2_M64BT_SINGLE_PE;
data64 |= IODA2_M64BT_ENABLE;
break;
}
/* Update HW and cache */
phb3_ioda_sel(p, IODA2_TBL_M64BT, window_num, false);
out_be64(p->regs + PHB_IODA_DATA0, data64);
p->m64b_cache[window_num] = data64;
return OPAL_SUCCESS;
}
static int64_t phb3_map_pe_mmio_window(struct phb *phb,
uint64_t pe_number,
uint16_t window_type,
uint16_t window_num,
uint16_t segment_num)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t data64, *cache;
if (pe_number >= PHB3_MAX_PE_NUM)
return OPAL_PARAMETER;
/*
* PHB3 doesn't support IODT any more. On the other
* hand, PHB3 support M64DT with much more flexibility.
* we need figure it out later. At least, we never use
* M64DT in kernel.
*/
switch(window_type) {
case OPAL_IO_WINDOW_TYPE:
return OPAL_UNSUPPORTED;
case OPAL_M32_WINDOW_TYPE:
if (window_num != 0 || segment_num >= PHB3_MAX_PE_NUM)
return OPAL_PARAMETER;
cache = &p->m32d_cache[segment_num];
phb3_ioda_sel(p, IODA2_TBL_M32DT, segment_num, false);
out_be64(p->regs + PHB_IODA_DATA0,
SETFIELD(IODA2_M32DT_PE, 0ull, pe_number));
*cache = SETFIELD(IODA2_M32DT_PE, 0ull, pe_number);
break;
case OPAL_M64_WINDOW_TYPE:
if (window_num >= 16)
return OPAL_PARAMETER;
cache = &p->m64b_cache[window_num];
data64 = *cache;
/* The BAR shouldn't be enabled yet */
if (data64 & IODA2_M64BT_ENABLE)
return OPAL_PARTIAL;
data64 |= IODA2_M64BT_SINGLE_PE;
data64 = SETFIELD(IODA2_M64BT_PE_HI, data64, pe_number >> 5);
data64 = SETFIELD(IODA2_M64BT_PE_LOW, data64, pe_number);
*cache = data64;
break;
default:
return OPAL_PARAMETER;
}
return OPAL_SUCCESS;
}
static int64_t phb3_map_pe_dma_window(struct phb *phb,
uint64_t pe_number,
uint16_t window_id,
uint16_t tce_levels,
uint64_t tce_table_addr,
uint64_t tce_table_size,
uint64_t tce_page_size)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t tts_encoded;
uint64_t data64 = 0;
/*
* Sanity check. We currently only support "2 window per PE" mode
* ie, only bit 59 of the PCI address is used to select the window
*/
if (pe_number >= PHB3_MAX_PE_NUM ||
(window_id >> 1) != pe_number)
return OPAL_PARAMETER;
/*
* tce_table_size == 0 is used to disable an entry, in this case
* we ignore other arguments
*/
if (tce_table_size == 0) {
phb3_ioda_sel(p, IODA2_TBL_TVT, window_id, false);
out_be64(p->regs + PHB_IODA_DATA0, 0);
p->tve_cache[window_id] = 0;
return OPAL_SUCCESS;
}
/* Additional arguments validation */
if (tce_levels < 1 || tce_levels > 5 ||
!is_pow2(tce_table_size) ||
tce_table_size < 0x1000)
return OPAL_PARAMETER;
/* Encode TCE table size */
data64 = SETFIELD(IODA2_TVT_TABLE_ADDR, 0ul, tce_table_addr >> 12);
tts_encoded = ilog2(tce_table_size) - 11;
if (tts_encoded > 31)
return OPAL_PARAMETER;
data64 = SETFIELD(IODA2_TVT_TCE_TABLE_SIZE, data64, tts_encoded);
/* Encode TCE page size */
switch (tce_page_size) {
case 0x1000: /* 4K */
data64 = SETFIELD(IODA2_TVT_IO_PSIZE, data64, 1);
break;
case 0x10000: /* 64K */
data64 = SETFIELD(IODA2_TVT_IO_PSIZE, data64, 5);
break;
case 0x1000000: /* 16M */
data64 = SETFIELD(IODA2_TVT_IO_PSIZE, data64, 13);
break;
case 0x10000000: /* 256M */
data64 = SETFIELD(IODA2_TVT_IO_PSIZE, data64, 17);
break;
default:
return OPAL_PARAMETER;
}
/* Encode number of levels */
data64 = SETFIELD(IODA2_TVT_NUM_LEVELS, data64, tce_levels - 1);
phb3_ioda_sel(p, IODA2_TBL_TVT, window_id, false);
out_be64(p->regs + PHB_IODA_DATA0, data64);
p->tve_cache[window_id] = data64;
return OPAL_SUCCESS;
}
static int64_t phb3_map_pe_dma_window_real(struct phb *phb,
uint64_t pe_number,
uint16_t window_id,
uint64_t pci_start_addr,
uint64_t pci_mem_size)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t end;
uint64_t tve;
if (pe_number >= PHB3_MAX_PE_NUM ||
(window_id >> 1) != pe_number)
return OPAL_PARAMETER;
if (pci_mem_size) {
/* Enable */
/*
* Check that the start address has the right TVE index,
* we only support the 1 bit mode where each PE has 2
* TVEs
*/
if ((pci_start_addr >> 59) != (window_id & 1))
return OPAL_PARAMETER;
pci_start_addr &= ((1ull << 59) - 1);
end = pci_start_addr + pci_mem_size;
/* We have to be 16M aligned */
if ((pci_start_addr & 0x00ffffff) ||
(pci_mem_size & 0x00ffffff))
return OPAL_PARAMETER;
/*
* It *looks* like this is the max we can support (we need
* to verify this. Also we are not checking for rollover,
* but then we aren't trying too hard to protect ourselves
* againt a completely broken OS.
*/
if (end > 0x0003ffffffffffffull)
return OPAL_PARAMETER;
/*
* Put start address bits 49:24 into TVE[52:53]||[0:23]
* and end address bits 49:24 into TVE[54:55]||[24:47]
* and set TVE[51]
*/
tve = (pci_start_addr << 16) & (0xffffffull << 48);
tve |= (pci_start_addr >> 38) & (3ull << 10);
tve |= (end >> 8) & (0xfffffful << 16);
tve |= (end >> 40) & (3ull << 8);
tve |= PPC_BIT(51);
} else {
/* Disable */
tve = 0;
}
phb3_ioda_sel(p, IODA2_TBL_TVT, window_id, false);
out_be64(p->regs + PHB_IODA_DATA0, tve);
p->tve_cache[window_id] = tve;
return OPAL_SUCCESS;
}
static bool phb3_pci_msi_check_q(struct phb3 *p, uint32_t ive_num)
{
uint64_t ive, ivc, ffi, state;
uint8_t *q_byte;
/* Each IVE has 16-bytes or 128-bytes */
ive = p->tbl_ivt + (ive_num * IVT_TABLE_STRIDE * 8);
q_byte = (uint8_t *)(ive + 5);
/*
* Handle Q bit. If the Q bit doesn't show up,
* we would have CI load to make that.
*/
if (!(*q_byte & 0x1)) {
/* Read from random PHB reg to force flush */
in_be64(p->regs + PHB_IVC_UPDATE);
/* Order with subsequent read of Q */
sync();
/* Q still not set, bail out */
if (!(*q_byte & 0x1))
return false;
}
/* Lock FFI and send interrupt */
while (1) {
state = in_be64(p->regs + PHB_FFI_LOCK);
if (!state)
break;
if (state == ~0ULL) /* PHB Fenced */
return false;
}
/* Clear Q bit and update IVC */
*q_byte = 0;
ivc = SETFIELD(PHB_IVC_UPDATE_SID, 0ul, ive_num) |
PHB_IVC_UPDATE_ENABLE_Q;
out_be64(p->regs + PHB_IVC_UPDATE, ivc);
/*
* Resend interrupt. Note the lock clear bit isn't documented in
* the PHB3 spec and thus is probably unnecessary but it's in
* IODA2 so let's be safe here, it won't hurt to set it
*/
ffi = SETFIELD(PHB_FFI_REQUEST_ISN, 0ul, ive_num) | PHB_FFI_LOCK_CLEAR;
out_be64(p->regs + PHB_FFI_REQUEST, ffi);
return true;
}
static void phb3_pci_msi_flush_ive(struct phb3 *p, uint32_t ive_num)
{
asm volatile("dcbf %0,%1"
:
: "b" (p->tbl_ivt), "r" (ive_num * IVT_TABLE_STRIDE * 8)
: "memory");
}
static int64_t phb3_pci_msi_eoi(struct phb *phb,
uint32_t hwirq)
{
struct phb3 *p = phb_to_phb3(phb);
uint32_t ive_num = PHB3_IRQ_NUM(hwirq);
uint64_t ive, ivc;
uint8_t *p_byte, gp, gen, newgen;
/* OS might not configure IVT yet */
if (!p->tbl_ivt)
return OPAL_HARDWARE;
/* Each IVE has 16-bytes or 128-bytes */
ive = p->tbl_ivt + (ive_num * IVT_TABLE_STRIDE * 8);
p_byte = (uint8_t *)(ive + 4);
/* Read generation and P */
gp = *p_byte;
gen = (gp >> 1) & 3;
newgen = (gen + 1) & 3;
/* Increment generation count and clear P */
*p_byte = newgen << 1;
/* If at this point:
* - the IVC is invalid (due to high IRQ load) and
* - we get a new interrupt on this hwirq.
* Due to the new interrupt, the IVC will fetch from the IVT.
* This IVC reload will result in P set and gen=n+1. This
* interrupt may not actually be delievered at this point
* though.
*
* Software will then try to clear P in the IVC (out_be64
* below). This could cause an interrupt to be lost because P
* is cleared in the IVC without the new interrupt being
* delivered.
*
* To avoid this race, we increment the generation count in
* the IVT when we clear P. When software writes the IVC with
* P cleared but with gen=n, the IVC won't actually clear P
* because gen doesn't match what it just cached from the IVT.
* Hence we don't lose P being set.
*/
/* Update the P bit in the IVC is gen count matches */
ivc = SETFIELD(PHB_IVC_UPDATE_SID, 0ul, ive_num) |
PHB_IVC_UPDATE_ENABLE_P |
PHB_IVC_UPDATE_ENABLE_GEN |
PHB_IVC_UPDATE_ENABLE_CON |
SETFIELD(PHB_IVC_UPDATE_GEN_MATCH, 0ul, gen) |
SETFIELD(PHB_IVC_UPDATE_GEN, 0ul, newgen);
/* out_be64 has a sync to order with the IVT update above */
out_be64(p->regs + PHB_IVC_UPDATE, ivc);
/* Handle Q bit */
phb3_pci_msi_check_q(p, ive_num);
phb3_pci_msi_flush_ive(p, ive_num);
return OPAL_SUCCESS;
}
static int64_t phb3_set_ive_pe(struct phb *phb,
uint64_t pe_number,
uint32_t ive_num)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t *cache, ivep, data64;
uint16_t *pe_word;
/* OS should enable the BAR in advance */
if (!p->tbl_ivt)
return OPAL_HARDWARE;
/* Each IVE reserves 128 bytes */
if (pe_number >= PHB3_MAX_PE_NUM ||
ive_num >= IVT_TABLE_ENTRIES)
return OPAL_PARAMETER;
/* Update IVE cache */
cache = &p->ive_cache[ive_num];
*cache = SETFIELD(IODA2_IVT_PE, *cache, pe_number);
/* Update in-memory IVE without clobbering P and Q */
ivep = p->tbl_ivt + (ive_num * IVT_TABLE_STRIDE * 8);
pe_word = (uint16_t *)(ivep + 6);
*pe_word = pe_number;
/* Invalidate IVC */
data64 = SETFIELD(PHB_IVC_INVALIDATE_SID, 0ul, ive_num);
out_be64(p->regs + PHB_IVC_INVALIDATE, data64);
return OPAL_SUCCESS;
}
static int64_t phb3_get_msi_32(struct phb *phb __unused,
uint64_t pe_number,
uint32_t ive_num,
uint8_t msi_range,
uint32_t *msi_address,
uint32_t *message_data)
{
/*
* Sanity check. We needn't check on mve_number (PE#)
* on PHB3 since the interrupt source is purely determined
* by its DMA address and data, but the check isn't
* harmful.
*/
if (pe_number >= PHB3_MAX_PE_NUM ||
ive_num >= IVT_TABLE_ENTRIES ||
msi_range != 1 || !msi_address|| !message_data)
return OPAL_PARAMETER;
/*
* DMA address and data will form the IVE index.
* For more details, please refer to IODA2 spec.
*/
*msi_address = 0xFFFF0000 | ((ive_num << 4) & 0xFFFFFE0F);
*message_data = ive_num & 0x1F;
return OPAL_SUCCESS;
}
static int64_t phb3_get_msi_64(struct phb *phb __unused,
uint64_t pe_number,
uint32_t ive_num,
uint8_t msi_range,
uint64_t *msi_address,
uint32_t *message_data)
{
/* Sanity check */
if (pe_number >= PHB3_MAX_PE_NUM ||
ive_num >= IVT_TABLE_ENTRIES ||
msi_range != 1 || !msi_address || !message_data)
return OPAL_PARAMETER;
/*
* DMA address and data will form the IVE index.
* For more details, please refer to IODA2 spec.
*/
*msi_address = (0x1ul << 60) | ((ive_num << 4) & 0xFFFFFFFFFFFFFE0Ful);
*message_data = ive_num & 0x1F;
return OPAL_SUCCESS;
}
static bool phb3_err_check_pbcq(struct phb3 *p)
{
uint64_t nfir, mask, wof, val64;
int32_t class, bit;
uint64_t severity[PHB3_ERR_CLASS_LAST] = {
0x0000000000000000UL, /* NONE */
0x018000F800000000UL, /* DEAD */
0x7E7DC70000000000UL, /* FENCED */
0x0000000000000000UL, /* ER */
0x0000000000000000UL /* INF */
};
/*
* Read on NFIR to see if XSCOM is working properly.
* If XSCOM doesn't work well, we need take the PHB
* into account any more.
*/
xscom_read(p->chip_id, p->pe_xscom + 0x0, &nfir);
if (nfir == 0xffffffffffffffffUL) {
p->err.err_src = PHB3_ERR_SRC_NONE;
p->err.err_class = PHB3_ERR_CLASS_DEAD;
phb3_set_err_pending(p, true);
return true;
}
/*
* Check WOF. We need handle unmasked errors firstly.
* We probably run into the situation (on simulator)
* where we have asserted FIR bits, but WOF has nothing.
* For that case, we should check FIR as well.
*/
xscom_read(p->chip_id, p->pe_xscom + 0x3, &mask);
xscom_read(p->chip_id, p->pe_xscom + 0x8, &wof);
if (wof & ~mask)
wof &= ~mask;
if (!wof) {
if (nfir & ~mask)
nfir &= ~mask;
if (!nfir)
return false;
wof = nfir;
}
/* We shouldn't hit class PHB3_ERR_CLASS_NONE */
for (class = PHB3_ERR_CLASS_NONE;
class < PHB3_ERR_CLASS_LAST;
class++) {
val64 = wof & severity[class];
if (!val64)
continue;
for (bit = 0; bit < 64; bit++) {
if (val64 & PPC_BIT(bit)) {
p->err.err_src = PHB3_ERR_SRC_PBCQ;
p->err.err_class = class;
p->err.err_bit = 63 - bit;
phb3_set_err_pending(p, true);
return true;
}
}
}
return false;
}
static bool phb3_err_check_lem(struct phb3 *p)
{
uint64_t fir, wof, mask, val64;
int32_t class, bit;
uint64_t severity[PHB3_ERR_CLASS_LAST] = {
0x0000000000000000UL, /* NONE */
0x0000000000000000UL, /* DEAD */
0xADB670C980ADD151UL, /* FENCED */
0x000800107F500A2CUL, /* ER */
0x42018E2200002482UL /* INF */
};
/*
* Read FIR. If XSCOM or ASB is frozen, we needn't
* go forward and just mark the PHB with dead state
*/
fir = phb3_read_reg_asb(p, PHB_LEM_FIR_ACCUM);
if (fir == 0xffffffffffffffffUL) {
p->err.err_src = PHB3_ERR_SRC_PHB;
p->err.err_class = PHB3_ERR_CLASS_DEAD;
phb3_set_err_pending(p, true);
return true;
}
/*
* Check on WOF for the unmasked errors firstly. Under
* some situation where we run skiboot on simulator,
* we already had FIR bits asserted, but WOF is still zero.
* For that case, we check FIR directly.
*/
wof = phb3_read_reg_asb(p, PHB_LEM_WOF);
mask = phb3_read_reg_asb(p, PHB_LEM_ERROR_MASK);
if (wof & ~mask)
wof &= ~mask;
if (!wof) {
if (fir & ~mask)
fir &= ~mask;
if (!fir)
return false;
wof = fir;
}
/* We shouldn't hit PHB3_ERR_CLASS_NONE */
for (class = PHB3_ERR_CLASS_NONE;
class < PHB3_ERR_CLASS_LAST;
class++) {
val64 = wof & severity[class];
if (!val64)
continue;
for (bit = 0; bit < 64; bit++) {
if (val64 & PPC_BIT(bit)) {
p->err.err_src = PHB3_ERR_SRC_PHB;
p->err.err_class = class;
p->err.err_bit = 63 - bit;
phb3_set_err_pending(p, true);
return true;
}
}
}
return false;
}
/*
* The function can be called during error recovery for INF
* and ER class. For INF case, it's expected to be called
* when grabbing the error log. We will call it explicitly
* when clearing frozen PE state for ER case.
*/
static void phb3_err_ER_clear(struct phb3 *p)
{
uint32_t val32;
uint64_t val64;
uint64_t fir = in_be64(p->regs + PHB_LEM_FIR_ACCUM);
/* Rec 1: Grab the PCI config lock */
/* Removed... unnecessary. We have our own lock here */
/* Rec 2/3/4: Take all inbound transactions */
out_be64(p->regs + PHB_CONFIG_ADDRESS, 0x8000001c00000000ul);
out_be32(p->regs + PHB_CONFIG_DATA, 0x10000000);
/* Rec 5/6/7: Clear pending non-fatal errors */
out_be64(p->regs + PHB_CONFIG_ADDRESS, 0x8000005000000000ul);
val32 = in_be32(p->regs + PHB_CONFIG_DATA);
out_be32(p->regs + PHB_CONFIG_DATA, (val32 & 0xe0700000) | 0x0f000f00);
/* Rec 8/9/10: Clear pending fatal errors for AER */
out_be64(p->regs + PHB_CONFIG_ADDRESS, 0x8000010400000000ul);
out_be32(p->regs + PHB_CONFIG_DATA, 0xffffffff);
/* Rec 11/12/13: Clear pending non-fatal errors for AER */
out_be64(p->regs + PHB_CONFIG_ADDRESS, 0x8000011000000000ul);
out_be32(p->regs + PHB_CONFIG_DATA, 0xffffffff);
/* Rec 22/23/24: Clear root port errors */
out_be64(p->regs + PHB_CONFIG_ADDRESS, 0x8000013000000000ul);
out_be32(p->regs + PHB_CONFIG_DATA, 0xffffffff);
/* Rec 25/26/27: Enable IO and MMIO bar */
out_be64(p->regs + PHB_CONFIG_ADDRESS, 0x8000004000000000ul);
out_be32(p->regs + PHB_CONFIG_DATA, 0x470100f8);
/* Rec 28: Release the PCI config lock */
/* Removed... unnecessary. We have our own lock here */
/* Rec 29...34: Clear UTL errors */
val64 = in_be64(p->regs + UTL_SYS_BUS_AGENT_STATUS);
out_be64(p->regs + UTL_SYS_BUS_AGENT_STATUS, val64);
val64 = in_be64(p->regs + UTL_PCIE_PORT_STATUS);
out_be64(p->regs + UTL_PCIE_PORT_STATUS, val64);
val64 = in_be64(p->regs + UTL_RC_STATUS);
out_be64(p->regs + UTL_RC_STATUS, val64);
/* Rec 39...66: Clear PHB error trap */
val64 = in_be64(p->regs + PHB_ERR_STATUS);
out_be64(p->regs + PHB_ERR_STATUS, val64);
out_be64(p->regs + PHB_ERR1_STATUS, 0x0ul);
out_be64(p->regs + PHB_ERR_LOG_0, 0x0ul);
out_be64(p->regs + PHB_ERR_LOG_1, 0x0ul);
val64 = in_be64(p->regs + PHB_OUT_ERR_STATUS);
out_be64(p->regs + PHB_OUT_ERR_STATUS, val64);
out_be64(p->regs + PHB_OUT_ERR1_STATUS, 0x0ul);
out_be64(p->regs + PHB_OUT_ERR_LOG_0, 0x0ul);
out_be64(p->regs + PHB_OUT_ERR_LOG_1, 0x0ul);
val64 = in_be64(p->regs + PHB_INA_ERR_STATUS);
out_be64(p->regs + PHB_INA_ERR_STATUS, val64);
out_be64(p->regs + PHB_INA_ERR1_STATUS, 0x0ul);
out_be64(p->regs + PHB_INA_ERR_LOG_0, 0x0ul);
out_be64(p->regs + PHB_INA_ERR_LOG_1, 0x0ul);
val64 = in_be64(p->regs + PHB_INB_ERR_STATUS);
out_be64(p->regs + PHB_INB_ERR_STATUS, val64);
out_be64(p->regs + PHB_INB_ERR1_STATUS, 0x0ul);
out_be64(p->regs + PHB_INB_ERR_LOG_0, 0x0ul);
out_be64(p->regs + PHB_INB_ERR_LOG_1, 0x0ul);
/* Rec 67/68: Clear FIR/WOF */
out_be64(p->regs + PHB_LEM_FIR_AND_MASK, ~fir);
out_be64(p->regs + PHB_LEM_WOF, 0x0ul);
}
static void phb3_read_phb_status(struct phb3 *p,
struct OpalIoPhb3ErrorData *stat)
{
uint16_t val;
uint64_t *pPEST;
uint64_t val64 = 0;
uint32_t i;
memset(stat, 0, sizeof(struct OpalIoPhb3ErrorData));
/* Error data common part */
stat->common.version = OPAL_PHB_ERROR_DATA_VERSION_1;
stat->common.ioType = OPAL_PHB_ERROR_DATA_TYPE_PHB3;
stat->common.len = sizeof(struct OpalIoPhb3ErrorData);
/*
* We read some registers using config space through AIB.
*
* Get to other registers using ASB when possible to get to them
* through a fence if one is present.
*/
/* Use ASB to access PCICFG if the PHB has been fenced */
p->flags |= PHB3_CFG_USE_ASB;
/* Grab RC bridge control, make it 32-bit */
phb3_pcicfg_read16(&p->phb, 0, PCI_CFG_BRCTL, &val);
stat->brdgCtl = val;
/* Grab UTL status registers */
stat->portStatusReg = hi32(phb3_read_reg_asb(p, UTL_PCIE_PORT_STATUS));
stat->rootCmplxStatus = hi32(phb3_read_reg_asb(p, UTL_RC_STATUS));
stat->busAgentStatus = hi32(phb3_read_reg_asb(p, UTL_SYS_BUS_AGENT_STATUS));
/*
* Grab various RC PCIe capability registers. All device, slot
* and link status are 16-bit, so we grab the pair control+status
* for each of them
*/
phb3_pcicfg_read32(&p->phb, 0, p->ecap + PCICAP_EXP_DEVCTL,
&stat->deviceStatus);
phb3_pcicfg_read32(&p->phb, 0, p->ecap + PCICAP_EXP_SLOTCTL,
&stat->slotStatus);
phb3_pcicfg_read32(&p->phb, 0, p->ecap + PCICAP_EXP_LCTL,
&stat->linkStatus);
/*
* I assume those are the standard config space header, cmd & status
* together makes 32-bit. Secondary status is 16-bit so I'll clear
* the top on that one
*/
phb3_pcicfg_read32(&p->phb, 0, PCI_CFG_CMD, &stat->devCmdStatus);
phb3_pcicfg_read16(&p->phb, 0, PCI_CFG_SECONDARY_STATUS, &val);
stat->devSecStatus = val;
/* Grab a bunch of AER regs */
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_RERR_STA,
&stat->rootErrorStatus);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_UE_STATUS,
&stat->uncorrErrorStatus);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_CE_STATUS,
&stat->corrErrorStatus);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_HDR_LOG0,
&stat->tlpHdr1);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_HDR_LOG1,
&stat->tlpHdr2);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_HDR_LOG2,
&stat->tlpHdr3);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_HDR_LOG3,
&stat->tlpHdr4);
phb3_pcicfg_read32(&p->phb, 0, p->aercap + PCIECAP_AER_SRCID,
&stat->sourceId);
/* Restore to AIB */
p->flags &= ~PHB3_CFG_USE_ASB;
/* PEC NFIR */
xscom_read(p->chip_id, p->pe_xscom + 0x0, &stat->nFir);
xscom_read(p->chip_id, p->pe_xscom + 0x3, &stat->nFirMask);
xscom_read(p->chip_id, p->pe_xscom + 0x8, &stat->nFirWOF);
/* PHB3 inbound and outbound error Regs */
stat->phbPlssr = phb3_read_reg_asb(p, PHB_CPU_LOADSTORE_STATUS);
stat->phbCsr = phb3_read_reg_asb(p, PHB_DMA_CHAN_STATUS);
stat->lemFir = phb3_read_reg_asb(p, PHB_LEM_FIR_ACCUM);
stat->lemErrorMask = phb3_read_reg_asb(p, PHB_LEM_ERROR_MASK);
stat->lemWOF = phb3_read_reg_asb(p, PHB_LEM_WOF);
stat->phbErrorStatus = phb3_read_reg_asb(p, PHB_ERR_STATUS);
stat->phbFirstErrorStatus = phb3_read_reg_asb(p, PHB_ERR1_STATUS);
stat->phbErrorLog0 = phb3_read_reg_asb(p, PHB_ERR_LOG_0);
stat->phbErrorLog1 = phb3_read_reg_asb(p, PHB_ERR_LOG_1);
stat->mmioErrorStatus = phb3_read_reg_asb(p, PHB_OUT_ERR_STATUS);
stat->mmioFirstErrorStatus = phb3_read_reg_asb(p, PHB_OUT_ERR1_STATUS);
stat->mmioErrorLog0 = phb3_read_reg_asb(p, PHB_OUT_ERR_LOG_0);
stat->mmioErrorLog1 = phb3_read_reg_asb(p, PHB_OUT_ERR_LOG_1);
stat->dma0ErrorStatus = phb3_read_reg_asb(p, PHB_INA_ERR_STATUS);
stat->dma0FirstErrorStatus = phb3_read_reg_asb(p, PHB_INA_ERR1_STATUS);
stat->dma0ErrorLog0 = phb3_read_reg_asb(p, PHB_INA_ERR_LOG_0);
stat->dma0ErrorLog1 = phb3_read_reg_asb(p, PHB_INA_ERR_LOG_1);
stat->dma1ErrorStatus = phb3_read_reg_asb(p, PHB_INB_ERR_STATUS);
stat->dma1FirstErrorStatus = phb3_read_reg_asb(p, PHB_INB_ERR1_STATUS);
stat->dma1ErrorLog0 = phb3_read_reg_asb(p, PHB_INB_ERR_LOG_0);
stat->dma1ErrorLog1 = phb3_read_reg_asb(p, PHB_INB_ERR_LOG_1);
/*
* Grab PESTA & B content. The error bit (bit#0) should
* be fetched from IODA and the left content from memory
* resident tables.
*/
pPEST = (uint64_t *)p->tbl_pest;
val64 = PHB_IODA_AD_AUTOINC;
val64 = SETFIELD(PHB_IODA_AD_TSEL, val64, IODA2_TBL_PESTA);
phb3_write_reg_asb(p, PHB_IODA_ADDR, val64);
for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) {
stat->pestA[i] = phb3_read_reg_asb(p, PHB_IODA_DATA0);
stat->pestA[i] |= pPEST[2 * i];
}
val64 = PHB_IODA_AD_AUTOINC;
val64 = SETFIELD(PHB_IODA_AD_TSEL, val64, IODA2_TBL_PESTB);
phb3_write_reg_asb(p, PHB_IODA_ADDR, val64);
for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) {
stat->pestB[i] = phb3_read_reg_asb(p, PHB_IODA_DATA0);
stat->pestB[i] |= pPEST[2 * i + 1];
}
}
static void phb3_eeh_dump_regs(struct phb3 *p, struct OpalIoPhb3ErrorData *regs)
{
struct OpalIoPhb3ErrorData *s;
unsigned int i;
if (!verbose_eeh)
return;
if (!regs) {
s = zalloc(sizeof(struct OpalIoPhb3ErrorData));
if (!s) {
PHBERR(p, "Failed to allocate error info !\n");
return;
}
phb3_read_phb_status(p, s);
} else {
s = regs;
}
PHBERR(p, "Error detected!\n");
PHBERR(p, " portStatusReg = %08x\n", s->portStatusReg);
PHBERR(p, " rootCmplxStatus = %08x\n", s->rootCmplxStatus);
PHBERR(p, " busAgentStatus = %08x\n", s->busAgentStatus);
PHBERR(p, " errorClass = %016llx\n", s->errorClass);
PHBERR(p, " correlator = %016llx\n", s->correlator);
PHBERR(p, " brdgCtl = %08x\n", s->brdgCtl);
PHBERR(p, " deviceStatus = %08x\n", s->deviceStatus);
PHBERR(p, " slotStatus = %08x\n", s->slotStatus);
PHBERR(p, " linkStatus = %08x\n", s->linkStatus);
PHBERR(p, " devCmdStatus = %08x\n", s->devCmdStatus);
PHBERR(p, " devSecStatus = %08x\n", s->devSecStatus);
PHBERR(p, " rootErrorStatus = %08x\n", s->rootErrorStatus);
PHBERR(p, " corrErrorStatus = %08x\n", s->corrErrorStatus);
PHBERR(p, " uncorrErrorStatus = %08x\n", s->uncorrErrorStatus);
/* Byte swap TLP headers so they are the same as the PCIe spec */
PHBERR(p, " tlpHdr1 = %08x\n", bswap_32(s->tlpHdr1));
PHBERR(p, " tlpHdr2 = %08x\n", bswap_32(s->tlpHdr2));
PHBERR(p, " tlpHdr3 = %08x\n", bswap_32(s->tlpHdr3));
PHBERR(p, " tlpHdr4 = %08x\n", bswap_32(s->tlpHdr4));
PHBERR(p, " sourceId = %08x\n", s->sourceId);
PHBERR(p, " nFir = %016llx\n", s->nFir);
PHBERR(p, " nFirMask = %016llx\n", s->nFirMask);
PHBERR(p, " nFirWOF = %016llx\n", s->nFirWOF);
PHBERR(p, " phbPlssr = %016llx\n", s->phbPlssr);
PHBERR(p, " phbCsr = %016llx\n", s->phbCsr);
PHBERR(p, " lemFir = %016llx\n", s->lemFir);
PHBERR(p, " lemErrorMask = %016llx\n", s->lemErrorMask);
PHBERR(p, " lemWOF = %016llx\n", s->lemWOF);
PHBERR(p, " phbErrorStatus = %016llx\n", s->phbErrorStatus);
PHBERR(p, " phbFirstErrorStatus = %016llx\n", s->phbFirstErrorStatus);
PHBERR(p, " phbErrorLog0 = %016llx\n", s->phbErrorLog0);
PHBERR(p, " phbErrorLog1 = %016llx\n", s->phbErrorLog1);
PHBERR(p, " mmioErrorStatus = %016llx\n", s->mmioErrorStatus);
PHBERR(p, "mmioFirstErrorStatus = %016llx\n", s->mmioFirstErrorStatus);
PHBERR(p, " mmioErrorLog0 = %016llx\n", s->mmioErrorLog0);
PHBERR(p, " mmioErrorLog1 = %016llx\n", s->mmioErrorLog1);
PHBERR(p, " dma0ErrorStatus = %016llx\n", s->dma0ErrorStatus);
PHBERR(p, "dma0FirstErrorStatus = %016llx\n", s->dma0FirstErrorStatus);
PHBERR(p, " dma0ErrorLog0 = %016llx\n", s->dma0ErrorLog0);
PHBERR(p, " dma0ErrorLog1 = %016llx\n", s->dma0ErrorLog1);
PHBERR(p, " dma1ErrorStatus = %016llx\n", s->dma1ErrorStatus);
PHBERR(p, "dma1FirstErrorStatus = %016llx\n", s->dma1FirstErrorStatus);
PHBERR(p, " dma1ErrorLog0 = %016llx\n", s->dma1ErrorLog0);
PHBERR(p, " dma1ErrorLog1 = %016llx\n", s->dma1ErrorLog1);
for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) {
if (!s->pestA[i] && !s->pestB[i])
continue;
PHBERR(p, " PEST[%03x] = %016llx %016llx\n",
i, s->pestA[i], s->pestB[i]);
}
if (s != regs)
free(s);
}
static int64_t phb3_msi_get_xive(struct irq_source *is, uint32_t isn,
uint16_t *server, uint8_t *prio)
{
struct phb3 *p = is->data;
uint32_t chip, index, irq;
uint64_t ive;
chip = p8_irq_to_chip(isn);
index = p8_irq_to_phb(isn);
irq = PHB3_IRQ_NUM(isn);
if (chip != p->chip_id ||
index != p->index ||
irq > PHB3_MSI_IRQ_MAX)
return OPAL_PARAMETER;
/*
* Each IVE has 16 bytes in cache. Note that the kernel
* should strip the link bits from server field.
*/
ive = p->ive_cache[irq];
*server = GETFIELD(IODA2_IVT_SERVER, ive);
*prio = GETFIELD(IODA2_IVT_PRIORITY, ive);
return OPAL_SUCCESS;
}
static int64_t phb3_msi_set_xive(struct irq_source *is, uint32_t isn,
uint16_t server, uint8_t prio)
{
struct phb3 *p = is->data;
uint32_t chip, index;
uint64_t *cache, ive_num, data64, m_server, m_prio, ivc;
uint32_t *ive;
chip = p8_irq_to_chip(isn);
index = p8_irq_to_phb(isn);
ive_num = PHB3_IRQ_NUM(isn);
if (p->broken || !p->tbl_rtt)
return OPAL_HARDWARE;
if (chip != p->chip_id ||
index != p->index ||
ive_num > PHB3_MSI_IRQ_MAX)
return OPAL_PARAMETER;
phb_lock(&p->phb);
/*
* We need strip the link from server. As Milton told
* me, the server is assigned as follows and the left
* bits unused: node/chip/core/thread/link = 2/3/4/3/2
*
* Note: the server has added the link bits to server.
*/
m_server = server;
m_prio = prio;
cache = &p->ive_cache[ive_num];
*cache = SETFIELD(IODA2_IVT_SERVER, *cache, m_server);
*cache = SETFIELD(IODA2_IVT_PRIORITY, *cache, m_prio);
/*
* Update IVT and IVC. We need use IVC update register
* to do that. Each IVE in the table has 128 bytes
*/
ive = (uint32_t *)(p->tbl_ivt + ive_num * IVT_TABLE_STRIDE * 8);
data64 = PHB_IVC_UPDATE_ENABLE_SERVER | PHB_IVC_UPDATE_ENABLE_PRI;
data64 = SETFIELD(PHB_IVC_UPDATE_SID, data64, ive_num);
data64 = SETFIELD(PHB_IVC_UPDATE_SERVER, data64, m_server);
data64 = SETFIELD(PHB_IVC_UPDATE_PRI, data64, m_prio);
/*
* We don't use SETFIELD because we are doing a 32-bit access
* in order to avoid touching the P and Q bits
*/
*ive = (m_server << 8) | m_prio;
out_be64(p->regs + PHB_IVC_UPDATE, data64);
if (prio != 0xff) {
/*
* Handle Q bit if we're going to enable the
* interrupt. The OS should make sure the interrupt
* handler has been installed already.
*/
if (phb3_pci_msi_check_q(p, ive_num))
phb3_pci_msi_flush_ive(p, ive_num);
} else {
/* Read from random PHB reg to force flush */
in_be64(p->regs + PHB_IVC_UPDATE);
/* Order with subsequent read of Q */
sync();
/* Clear P, Q and Gen, preserve PE# */
ive[1] &= 0x0000ffff;
/*
* Update the IVC with a match against the old gen
* count. No need to worry about racing with P being
* set in the cache since IRQ is masked at this point.
*/
ivc = SETFIELD(PHB_IVC_UPDATE_SID, 0ul, ive_num) |
PHB_IVC_UPDATE_ENABLE_P |
PHB_IVC_UPDATE_ENABLE_Q |
PHB_IVC_UPDATE_ENABLE_GEN;
out_be64(p->regs + PHB_IVC_UPDATE, ivc);
}
phb_unlock(&p->phb);
return OPAL_SUCCESS;
}
static int64_t phb3_lsi_get_xive(struct irq_source *is, uint32_t isn,
uint16_t *server, uint8_t *prio)
{
struct phb3 *p = is->data;
uint32_t chip, index, irq;
uint64_t lxive;
chip = p8_irq_to_chip(isn);
index = p8_irq_to_phb(isn);
irq = PHB3_IRQ_NUM(isn);
if (chip != p->chip_id ||
index != p->index ||
irq < PHB3_LSI_IRQ_MIN ||
irq > PHB3_LSI_IRQ_MAX)
return OPAL_PARAMETER;
lxive = p->lxive_cache[irq - PHB3_LSI_IRQ_MIN];
*server = GETFIELD(IODA2_LXIVT_SERVER, lxive);
*prio = GETFIELD(IODA2_LXIVT_PRIORITY, lxive);
return OPAL_SUCCESS;
}
static int64_t phb3_lsi_set_xive(struct irq_source *is, uint32_t isn,
uint16_t server, uint8_t prio)
{
struct phb3 *p = is->data;
uint32_t chip, index, irq, entry;
uint64_t lxive;
chip = p8_irq_to_chip(isn);
index = p8_irq_to_phb(isn);
irq = PHB3_IRQ_NUM(isn);
if (p->broken)
return OPAL_HARDWARE;
if (chip != p->chip_id ||
index != p->index ||
irq < PHB3_LSI_IRQ_MIN ||
irq > PHB3_LSI_IRQ_MAX)
return OPAL_PARAMETER;
lxive = SETFIELD(IODA2_LXIVT_SERVER, 0ul, server);
lxive = SETFIELD(IODA2_LXIVT_PRIORITY, lxive, prio);
phb_lock(&p->phb);
/*
* We cache the arguments because we have to mangle
* it in order to hijack 3 bits of priority to extend
* the server number
*/
entry = irq - PHB3_LSI_IRQ_MIN;
p->lxive_cache[entry] = lxive;
/* We use HRT entry 0 always for now */
phb3_ioda_sel(p, IODA2_TBL_LXIVT, entry, false);
lxive = in_be64(p->regs + PHB_IODA_DATA0);
lxive = SETFIELD(IODA2_LXIVT_SERVER, lxive, server);
lxive = SETFIELD(IODA2_LXIVT_PRIORITY, lxive, prio);
out_be64(p->regs + PHB_IODA_DATA0, lxive);
phb_unlock(&p->phb);
return OPAL_SUCCESS;
}
static void phb3_err_interrupt(struct irq_source *is, uint32_t isn)
{
struct phb3 *p = is->data;
PHBDBG(p, "Got interrupt 0x%08x\n", isn);
/* Update pending event */
opal_update_pending_evt(OPAL_EVENT_PCI_ERROR,
OPAL_EVENT_PCI_ERROR);
/* If the PHB is broken, go away */
if (p->broken)
return;
/*
* Mark the PHB has pending error so that the OS
* can handle it at late point.
*/
phb3_set_err_pending(p, true);
}
static uint64_t phb3_lsi_attributes(struct irq_source *is, uint32_t isn)
{
#ifndef DISABLE_ERR_INTS
struct phb3 *p = is->data;
uint32_t idx = isn - p->base_lsi;
if (idx == PHB3_LSI_PCIE_INF || idx == PHB3_LSI_PCIE_ER)
return IRQ_ATTR_TARGET_OPAL | IRQ_ATTR_TARGET_RARE | IRQ_ATTR_TYPE_LSI;
#endif
return IRQ_ATTR_TARGET_LINUX;
}
/* MSIs (OS owned) */
static const struct irq_source_ops phb3_msi_irq_ops = {
.get_xive = phb3_msi_get_xive,
.set_xive = phb3_msi_set_xive,
};
/* LSIs (OS owned) */
static const struct irq_source_ops phb3_lsi_irq_ops = {
.get_xive = phb3_lsi_get_xive,
.set_xive = phb3_lsi_set_xive,
.attributes = phb3_lsi_attributes,
.interrupt = phb3_err_interrupt,
};
static int64_t phb3_set_pe(struct phb *phb,
uint64_t pe_number,
uint64_t bdfn,
uint8_t bcompare,
uint8_t dcompare,
uint8_t fcompare,
uint8_t action)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t mask, val, tmp, idx;
int32_t all = 0;
uint16_t *rte;
/* Sanity check */
if (!p->tbl_rtt)
return OPAL_HARDWARE;
if (action != OPAL_MAP_PE && action != OPAL_UNMAP_PE)
return OPAL_PARAMETER;
if (pe_number >= PHB3_MAX_PE_NUM || bdfn > 0xffff ||
bcompare > OpalPciBusAll ||
dcompare > OPAL_COMPARE_RID_DEVICE_NUMBER ||
fcompare > OPAL_COMPARE_RID_FUNCTION_NUMBER)
return OPAL_PARAMETER;
/* Figure out the RID range */
if (bcompare == OpalPciBusAny) {
mask = 0x0;
val = 0x0;
all = 0x1;
} else {
tmp = ((0x1 << (bcompare + 1)) - 1) << (15 - bcompare);
mask = tmp;
val = bdfn & tmp;
}
if (dcompare == OPAL_IGNORE_RID_DEVICE_NUMBER)
all = (all << 1) | 0x1;
else {
mask |= 0xf8;
val |= (bdfn & 0xf8);
}
if (fcompare == OPAL_IGNORE_RID_FUNCTION_NUMBER)
all = (all << 1) | 0x1;
else {
mask |= 0x7;
val |= (bdfn & 0x7);
}
/* Map or unmap the RTT range */
if (all == 0x7) {
if (action == OPAL_MAP_PE) {
for (idx = 0; idx < RTT_TABLE_ENTRIES; idx++)
p->rte_cache[idx] = pe_number;
} else {
for ( idx = 0; idx < ARRAY_SIZE(p->rte_cache); idx++)
p->rte_cache[idx] = PHB3_RESERVED_PE_NUM;
}
memcpy((void *)p->tbl_rtt, p->rte_cache, RTT_TABLE_SIZE);
} else {
rte = (uint16_t *)p->tbl_rtt;
for (idx = 0; idx < RTT_TABLE_ENTRIES; idx++, rte++) {
if ((idx & mask) != val)
continue;
if (action == OPAL_MAP_PE)
p->rte_cache[idx] = pe_number;
else
p->rte_cache[idx] = PHB3_RESERVED_PE_NUM;
*rte = p->rte_cache[idx];
}
}
/* Invalidate the entire RTC */
out_be64(p->regs + PHB_RTC_INVALIDATE, PHB_RTC_INVALIDATE_ALL);
return OPAL_SUCCESS;
}
static int64_t phb3_set_peltv(struct phb *phb,
uint32_t parent_pe,
uint32_t child_pe,
uint8_t state)
{
struct phb3 *p = phb_to_phb3(phb);
uint8_t *peltv;
uint32_t idx, mask;
/* Sanity check */
if (!p->tbl_peltv)
return OPAL_HARDWARE;
if (parent_pe >= PHB3_MAX_PE_NUM || child_pe >= PHB3_MAX_PE_NUM)
return OPAL_PARAMETER;
/* Find index for parent PE */
idx = parent_pe * (PHB3_MAX_PE_NUM / 8);
idx += (child_pe / 8);
mask = 0x1 << (7 - (child_pe % 8));
peltv = (uint8_t *)p->tbl_peltv;
peltv += idx;
if (state) {
*peltv |= mask;
p->peltv_cache[idx] |= mask;
} else {
*peltv &= ~mask;
p->peltv_cache[idx] &= ~mask;
}
return OPAL_SUCCESS;
}
static void phb3_prepare_link_change(struct pci_slot *slot,
bool is_up)
{
struct phb3 *p = phb_to_phb3(slot->phb);
struct pci_device *pd = slot->pd;
uint32_t reg32;
p->has_link = is_up;
if (!is_up) {
if (!pd || !pd->slot || !pd->slot->surprise_pluggable) {
/* Mask PCIE port interrupts */
out_be64(p->regs + UTL_PCIE_PORT_IRQ_EN,
0xad42800000000000UL);
pci_cfg_read32(&p->phb, 0,
p->aercap + PCIECAP_AER_UE_MASK, &reg32);
reg32 |= PCIECAP_AER_UE_MASK_SURPRISE_DOWN;
pci_cfg_write32(&p->phb, 0,
p->aercap + PCIECAP_AER_UE_MASK, reg32);
}
/* Mask AER receiver error */
phb3_pcicfg_read32(&p->phb, 0,
p->aercap + PCIECAP_AER_CE_MASK, &reg32);
reg32 |= PCIECAP_AER_CE_RECVR_ERR;
phb3_pcicfg_write32(&p->phb, 0,
p->aercap + PCIECAP_AER_CE_MASK, reg32);
/* Block PCI-CFG access */
p->flags |= PHB3_CFG_BLOCKED;
} else {
/* Clear AER receiver error status */
phb3_pcicfg_write32(&p->phb, 0,
p->aercap + PCIECAP_AER_CE_STATUS,
PCIECAP_AER_CE_RECVR_ERR);
/* Unmask receiver error status in AER */
phb3_pcicfg_read32(&p->phb, 0,
p->aercap + PCIECAP_AER_CE_MASK, &reg32);
reg32 &= ~PCIECAP_AER_CE_RECVR_ERR;
phb3_pcicfg_write32(&p->phb, 0,
p->aercap + PCIECAP_AER_CE_MASK, reg32);
/* Clear spurrious errors and enable PCIE port interrupts */
out_be64(p->regs + UTL_PCIE_PORT_STATUS,
0xffdfffffffffffffUL);
if (!pd || !pd->slot || !pd->slot->surprise_pluggable) {
out_be64(p->regs + UTL_PCIE_PORT_IRQ_EN,
0xad52800000000000UL);
pci_cfg_read32(&p->phb, 0,
p->aercap + PCIECAP_AER_UE_MASK, &reg32);
reg32 &= ~PCIECAP_AER_UE_MASK_SURPRISE_DOWN;
pci_cfg_write32(&p->phb, 0,
p->aercap + PCIECAP_AER_UE_MASK, reg32);
}
/* Don't block PCI-CFG */
p->flags &= ~PHB3_CFG_BLOCKED;
/*
* We might lose the bus numbers during the reset operation
* and we need to restore them. Otherwise, some adapters (e.g.
* IPR) can't be probed properly by the kernel. We don't need
* to restore bus numbers for every kind of reset, however,
* it's not harmful to always restore the bus numbers, which
* simplifies the logic.
*/
pci_restore_bridge_buses(slot->phb, slot->pd);
if (slot->phb->ops->device_init)
pci_walk_dev(slot->phb, slot->pd,
slot->phb->ops->device_init, NULL);
}
}
static int64_t phb3_get_presence_state(struct pci_slot *slot, uint8_t *val)
{
struct phb3 *p = phb_to_phb3(slot->phb);
uint64_t hp_override;
if (p->broken)
return OPAL_HARDWARE;
/*
* On P8, the slot status isn't wired up properly, we have
* to use the hotplug override A/B bits.
*/
hp_override = in_be64(p->regs + PHB_HOTPLUG_OVERRIDE);
if ((hp_override & PHB_HPOVR_PRESENCE_A) &&
(hp_override & PHB_HPOVR_PRESENCE_B))
*val = OPAL_PCI_SLOT_EMPTY;
else
*val = OPAL_PCI_SLOT_PRESENT;
return OPAL_SUCCESS;
}
static int64_t phb3_get_link_state(struct pci_slot *slot, uint8_t *val)
{
struct phb3 *p = phb_to_phb3(slot->phb);
uint64_t reg;
uint16_t state;
int64_t rc;
/* Link is up, let's find the actual speed */
reg = in_be64(p->regs + PHB_PCIE_DLP_TRAIN_CTL);
if (!(reg & PHB_PCIE_DLP_TC_DL_LINKACT)) {
*val = 0;
return OPAL_SUCCESS;
}
rc = phb3_pcicfg_read16(&p->phb, 0,
p->ecap + PCICAP_EXP_LSTAT, &state);
if (rc != OPAL_SUCCESS) {
PHBERR(p, "%s: Error %lld getting link state\n", __func__, rc);
return OPAL_HARDWARE;
}
if (state & PCICAP_EXP_LSTAT_DLLL_ACT)
*val = ((state & PCICAP_EXP_LSTAT_WIDTH) >> 4);
else
*val = 0;
return OPAL_SUCCESS;
}
static int64_t phb3_retry_state(struct pci_slot *slot)
{
struct phb3 *p = phb_to_phb3(slot->phb);
if (slot->retry_state == PCI_SLOT_STATE_NORMAL)
return OPAL_WRONG_STATE;
PHBDBG(p, "Retry state %08x\n", slot->retry_state);
slot->delay_tgt_tb = 0;
pci_slot_set_state(slot, slot->retry_state);
slot->retry_state = PCI_SLOT_STATE_NORMAL;
return slot->ops.run_sm(slot);
}
static int64_t phb3_poll_link(struct pci_slot *slot)
{
struct phb3 *p = phb_to_phb3(slot->phb);
uint64_t reg;
int64_t rc;
switch (slot->state) {
case PHB3_SLOT_NORMAL:
case PHB3_SLOT_LINK_START:
PHBDBG(p, "LINK: Start polling\n");
slot->retries = PHB3_LINK_ELECTRICAL_RETRIES;
pci_slot_set_state(slot, PHB3_SLOT_LINK_WAIT_ELECTRICAL);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(100));
case PHB3_SLOT_LINK_WAIT_ELECTRICAL:
/*
* Wait for the link electrical connection to be
* established (shorter timeout). This allows us to
* workaround spurrious presence detect on some machines
* without waiting 10s each time
*
* Note: We *also* check for the full link up bit here
* because simics doesn't seem to implement the electrical
* link bit at all
*/
reg = in_be64(p->regs + PHB_PCIE_DLP_TRAIN_CTL);
if (reg & (PHB_PCIE_DLP_INBAND_PRESENCE |
PHB_PCIE_DLP_TC_DL_LINKACT)) {
PHBDBG(p, "LINK: Electrical link detected\n");
pci_slot_set_state(slot, PHB3_SLOT_LINK_WAIT);
slot->retries = PHB3_LINK_WAIT_RETRIES;
return pci_slot_set_sm_timeout(slot, msecs_to_tb(100));
}
if (slot->retries-- == 0) {
PHBDBG(p, "LINK: Timeout waiting for electrical link\n");
PHBDBG(p, "LINK: DLP train control: 0x%016llx\n", reg);
rc = phb3_retry_state(slot);
if (rc >= OPAL_SUCCESS)
return rc;
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return OPAL_SUCCESS;
}
return pci_slot_set_sm_timeout(slot, msecs_to_tb(100));
case PHB3_SLOT_LINK_WAIT:
reg = in_be64(p->regs + PHB_PCIE_DLP_TRAIN_CTL);
if (reg & PHB_PCIE_DLP_TC_DL_LINKACT) {
PHBDBG(p, "LINK: Link is up\n");
if (slot->ops.prepare_link_change)
slot->ops.prepare_link_change(slot, true);
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return OPAL_SUCCESS;
}
if (slot->retries-- == 0) {
PHBDBG(p, "LINK: Timeout waiting for link up\n");
PHBDBG(p, "LINK: DLP train control: 0x%016llx\n", reg);
rc = phb3_retry_state(slot);
if (rc >= OPAL_SUCCESS)
return rc;
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return OPAL_SUCCESS;
}
return pci_slot_set_sm_timeout(slot, msecs_to_tb(100));
default:
PHBERR(p, "LINK: Unexpected slot state %08x\n",
slot->state);
}
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t phb3_hreset(struct pci_slot *slot)
{
struct phb3 *p = phb_to_phb3(slot->phb);
uint16_t brctl;
uint8_t presence = 1;
switch (slot->state) {
case PHB3_SLOT_NORMAL:
PHBDBG(p, "HRESET: Starts\n");
if (slot->ops.get_presence_state)
slot->ops.get_presence_state(slot, &presence);
if (!presence) {
PHBDBG(p, "HRESET: No device\n");
return OPAL_SUCCESS;
}
PHBDBG(p, "HRESET: Prepare for link down\n");
if (slot->ops.prepare_link_change)
slot->ops.prepare_link_change(slot, false);
/* fall through */
case PHB3_SLOT_HRESET_START:
PHBDBG(p, "HRESET: Assert\n");
phb3_pcicfg_read16(&p->phb, 0, PCI_CFG_BRCTL, &brctl);
brctl |= PCI_CFG_BRCTL_SECONDARY_RESET;
phb3_pcicfg_write16(&p->phb, 0, PCI_CFG_BRCTL, brctl);
pci_slot_set_state(slot, PHB3_SLOT_HRESET_DELAY);
return pci_slot_set_sm_timeout(slot, secs_to_tb(1));
case PHB3_SLOT_HRESET_DELAY:
PHBDBG(p, "HRESET: Deassert\n");
phb3_pcicfg_read16(&p->phb, 0, PCI_CFG_BRCTL, &brctl);
brctl &= ~PCI_CFG_BRCTL_SECONDARY_RESET;
phb3_pcicfg_write16(&p->phb, 0, PCI_CFG_BRCTL, brctl);
/*
* Due to some oddball adapters bouncing the link
* training a couple of times, we wait for a full second
* before we start checking the link status, otherwise
* we can get a spurrious link down interrupt which
* causes us to EEH immediately.
*/
pci_slot_set_state(slot, PHB3_SLOT_HRESET_DELAY2);
return pci_slot_set_sm_timeout(slot, secs_to_tb(1));
case PHB3_SLOT_HRESET_DELAY2:
pci_slot_set_state(slot, PHB3_SLOT_LINK_START);
return slot->ops.poll_link(slot);
default:
PHBERR(p, "Unexpected slot state %08x\n", slot->state);
}
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t phb3_freset(struct pci_slot *slot)
{
struct phb3 *p = phb_to_phb3(slot->phb);
uint8_t presence = 1;
uint64_t reg;
switch(slot->state) {
case PHB3_SLOT_NORMAL:
PHBDBG(p, "FRESET: Starts\n");
/* Nothing to do without adapter connected */
if (slot->ops.get_presence_state)
slot->ops.get_presence_state(slot, &presence);
if (!presence) {
PHBDBG(p, "FRESET: No device\n");
return OPAL_SUCCESS;
}
PHBDBG(p, "FRESET: Prepare for link down\n");
slot->retry_state = PHB3_SLOT_FRESET_START;
if (slot->ops.prepare_link_change)
slot->ops.prepare_link_change(slot, false);
/* fall through */
case PHB3_SLOT_FRESET_START:
if (!p->skip_perst) {
PHBDBG(p, "FRESET: Assert\n");
reg = in_be64(p->regs + PHB_RESET);
reg &= ~0x2000000000000000ul;
out_be64(p->regs + PHB_RESET, reg);
pci_slot_set_state(slot,
PHB3_SLOT_FRESET_ASSERT_DELAY);
return pci_slot_set_sm_timeout(slot, secs_to_tb(1));
}
/* To skip the assert during boot time */
PHBDBG(p, "FRESET: Assert skipped\n");
pci_slot_set_state(slot, PHB3_SLOT_FRESET_ASSERT_DELAY);
p->skip_perst = false;
/* fall through */
case PHB3_SLOT_FRESET_ASSERT_DELAY:
PHBDBG(p, "FRESET: Deassert\n");
reg = in_be64(p->regs + PHB_RESET);
reg |= 0x2000000000000000ul;
out_be64(p->regs + PHB_RESET, reg);
pci_slot_set_state(slot,
PHB3_SLOT_FRESET_DEASSERT_DELAY);
/* CAPP FPGA requires 1s to flash before polling link */
return pci_slot_set_sm_timeout(slot, secs_to_tb(1));
case PHB3_SLOT_FRESET_DEASSERT_DELAY:
pci_slot_set_state(slot, PHB3_SLOT_LINK_START);
return slot->ops.poll_link(slot);
default:
PHBERR(p, "Unexpected slot state %08x\n", slot->state);
}
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t load_capp_ucode(struct phb3 *p)
{
int64_t rc;
if (p->index > PHB3_CAPP_MAX_PHB_INDEX(p))
return OPAL_HARDWARE;
/* 0x434150504c494448 = 'CAPPLIDH' in ASCII */
rc = capp_load_ucode(p->chip_id, p->phb.opal_id, p->index,
0x434150504c494448UL, PHB3_CAPP_REG_OFFSET(p),
CAPP_APC_MASTER_ARRAY_ADDR_REG,
CAPP_APC_MASTER_ARRAY_WRITE_REG,
CAPP_SNP_ARRAY_ADDR_REG,
CAPP_SNP_ARRAY_WRITE_REG);
return rc;
}
static void do_capp_recovery_scoms(struct phb3 *p)
{
uint64_t reg;
uint32_t offset;
PHBDBG(p, "Doing CAPP recovery scoms\n");
offset = PHB3_CAPP_REG_OFFSET(p);
/* disable snoops */
xscom_write(p->chip_id, SNOOP_CAPI_CONFIG + offset, 0);
load_capp_ucode(p);
/* clear err rpt reg*/
xscom_write(p->chip_id, CAPP_ERR_RPT_CLR + offset, 0);
/* clear capp fir */
xscom_write(p->chip_id, CAPP_FIR + offset, 0);
xscom_read(p->chip_id, CAPP_ERR_STATUS_CTRL + offset, &reg);
reg &= ~(PPC_BIT(0) | PPC_BIT(1));
xscom_write(p->chip_id, CAPP_ERR_STATUS_CTRL + offset, reg);
}
/*
* Disable CAPI mode on a PHB.
*
* Must be done while PHB is fenced and in recovery. Leaves CAPP in recovery -
* we can't come out of recovery until the PHB has been reinitialised.
*
* We don't reset generic error registers here - we rely on phb3_init_hw() to
* do that.
*
* Sets PHB3_CAPP_DISABLING flag when complete.
*/
static void disable_capi_mode(struct phb3 *p)
{
struct proc_chip *chip = get_chip(p->chip_id);
uint64_t reg;
uint32_t offset = PHB3_CAPP_REG_OFFSET(p);
lock(&capi_lock);
xscom_read(p->chip_id, PE_CAPP_EN + PE_REG_OFFSET(p), &reg);
if (!(reg & PPC_BIT(0))) {
/* Not in CAPI mode, no action required */
goto out;
}
PHBDBG(p, "CAPP: Disabling CAPI mode\n");
if (!(chip->capp_phb3_attached_mask & (1 << p->index)))
PHBERR(p, "CAPP: CAPP attached mask not set!\n");
xscom_read(p->chip_id, CAPP_ERR_STATUS_CTRL + offset, &reg);
if (!(reg & PPC_BIT(0))) {
PHBERR(p, "CAPP: not in recovery, can't disable CAPI mode!\n");
goto out;
}
/* Snoop CAPI Configuration Register - disable snooping */
xscom_write(p->chip_id, SNOOP_CAPI_CONFIG + offset, 0ull);
/* APC Master PB Control Register - disable examining cResps */
xscom_read(p->chip_id, APC_MASTER_PB_CTRL + offset, &reg);
reg &= ~PPC_BIT(3);
xscom_write(p->chip_id, APC_MASTER_PB_CTRL + offset, reg);
/* APC Master Config Register - de-select PHBs */
xscom_read(p->chip_id, APC_MASTER_CAPI_CTRL + offset, &reg);
reg &= ~PPC_BITMASK(1, 3);
xscom_write(p->chip_id, APC_MASTER_CAPI_CTRL + offset, reg);
/* PE Bus AIB Mode Bits */
xscom_read(p->chip_id, p->pci_xscom + 0xf, &reg);
reg |= PPC_BITMASK(7, 8); /* Ch2 command credit */
reg &= ~PPC_BITMASK(40, 42); /* Disable HOL blocking */
xscom_write(p->chip_id, p->pci_xscom + 0xf, reg);
/* PCI Hardware Configuration 0 Register - all store queues free */
xscom_read(p->chip_id, p->pe_xscom + 0x18, &reg);
reg &= ~PPC_BIT(14);
reg |= PPC_BIT(15);
xscom_write(p->chip_id, p->pe_xscom + 0x18, reg);
/*
* PCI Hardware Configuration 1 Register - enable read response
* arrival/address request ordering
*/
xscom_read(p->chip_id, p->pe_xscom + 0x19, &reg);
reg |= PPC_BITMASK(17,18);
xscom_write(p->chip_id, p->pe_xscom + 0x19, reg);
/*
* AIB TX Command Credit Register - set AIB credit values back to
* normal
*/
xscom_read(p->chip_id, p->pci_xscom + 0xd, &reg);
reg |= PPC_BIT(42);
reg &= ~PPC_BITMASK(43, 47);
xscom_write(p->chip_id, p->pci_xscom + 0xd, reg);
/* AIB TX Credit Init Timer - reset timer */
xscom_write(p->chip_id, p->pci_xscom + 0xc, 0xff00000000000000UL);
/*
* PBCQ Mode Control Register - set dcache handling to normal, not CAPP
* mode
*/
xscom_read(p->chip_id, p->pe_xscom + 0xb, &reg);
reg &= ~PPC_BIT(25);
xscom_write(p->chip_id, p->pe_xscom + 0xb, reg);
/* Registers touched by phb3_init_capp_regs() */
/* CAPP Transport Control Register */
xscom_write(p->chip_id, TRANSPORT_CONTROL + offset, 0x0001000000000000UL);
/* Canned pResp Map Register 0/1/2 */
xscom_write(p->chip_id, CANNED_PRESP_MAP0 + offset, 0);
xscom_write(p->chip_id, CANNED_PRESP_MAP1 + offset, 0);
xscom_write(p->chip_id, CANNED_PRESP_MAP2 + offset, 0);
/* Flush SUE State Map Register */
xscom_write(p->chip_id, FLUSH_SUE_STATE_MAP + offset, 0);
/* CAPP Epoch and Recovery Timers Control Register */
xscom_write(p->chip_id, CAPP_EPOCH_TIMER_CTRL + offset, 0);
/* PE Secure CAPP Enable Register - we're all done! Disable CAPP mode! */
xscom_write(p->chip_id, PE_CAPP_EN + PE_REG_OFFSET(p), 0ull);
/* Trigger CAPP recovery scoms after reinit */
p->flags |= PHB3_CAPP_DISABLING;
chip->capp_phb3_attached_mask &= ~(1 << p->index);
out:
unlock(&capi_lock);
}
static int64_t phb3_creset(struct pci_slot *slot)
{
struct phb3 *p = phb_to_phb3(slot->phb);
uint64_t cqsts, val;
switch (slot->state) {
case PHB3_SLOT_NORMAL:
case PHB3_SLOT_CRESET_START:
PHBDBG(p, "CRESET: Starts\n");
/* do steps 3-5 of capp recovery procedure */
if (p->flags & PHB3_CAPP_RECOVERY)
do_capp_recovery_scoms(p);
/*
* The users might be doing error injection through PBCQ
* Error Inject Control Register. Without clearing that,
* we will get recrusive error during recovery and it will
* fail eventually.
*/
xscom_write(p->chip_id, p->pe_xscom + 0xa, 0x0ul);
/*
* We might have escalated frozen state on non-existing PE
* to fenced PHB. For the case, the PHB isn't fenced in the
* hardware level and it's not safe to do ETU reset. So we
* have to force fenced PHB prior to ETU reset.
*/
if (!phb3_fenced(p))
xscom_write(p->chip_id, p->pe_xscom + 0x2, 0x000000f000000000ull);
/* Now that we're guaranteed to be fenced, disable CAPI mode */
if (!(p->flags & PHB3_CAPP_RECOVERY))
disable_capi_mode(p);
/* Clear errors in NFIR and raise ETU reset */
xscom_read(p->chip_id, p->pe_xscom + 0x0, &p->nfir_cache);
xscom_read(p->chip_id, p->spci_xscom + 1, &val);/* HW275117 */
xscom_write(p->chip_id, p->pci_xscom + 0xa,
0x8000000000000000UL);
pci_slot_set_state(slot, PHB3_SLOT_CRESET_WAIT_CQ);
slot->retries = 500;
return pci_slot_set_sm_timeout(slot, msecs_to_tb(10));
case PHB3_SLOT_CRESET_WAIT_CQ:
xscom_read(p->chip_id, p->pe_xscom + 0x1c, &val);
xscom_read(p->chip_id, p->pe_xscom + 0x1d, &val);
xscom_read(p->chip_id, p->pe_xscom + 0x1e, &val);
xscom_read(p->chip_id, p->pe_xscom + 0xf, &cqsts);
if (!(cqsts & 0xC000000000000000UL)) {
PHBDBG(p, "CRESET: No pending transactions\n");
xscom_write(p->chip_id, p->pe_xscom + 0x1, ~p->nfir_cache);
pci_slot_set_state(slot, PHB3_SLOT_CRESET_REINIT);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(100));
}
if (slot->retries-- == 0) {
PHBERR(p, "Timeout waiting for pending transaction\n");
goto error;
}
return pci_slot_set_sm_timeout(slot, msecs_to_tb(10));
case PHB3_SLOT_CRESET_REINIT:
PHBDBG(p, "CRESET: Reinitialization\n");
/*
* Clear AIB fenced state. Otherwise, we can't access the
* PCI config space of root complex when reinitializing
* the PHB.
*/
p->flags &= ~PHB3_AIB_FENCED;
p->flags &= ~PHB3_CAPP_RECOVERY;
phb3_init_hw(p, false);
if (p->flags & PHB3_CAPP_DISABLING) {
do_capp_recovery_scoms(p);
p->flags &= ~PHB3_CAPP_DISABLING;
}
pci_slot_set_state(slot, PHB3_SLOT_CRESET_FRESET);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(100));
case PHB3_SLOT_CRESET_FRESET:
pci_slot_set_state(slot, PHB3_SLOT_NORMAL);
return slot->ops.freset(slot);
default:
PHBERR(p, "CRESET: Unexpected slot state %08x\n",
slot->state);
}
error:
return OPAL_HARDWARE;
}
/*
* Initialize root complex slot, which is mainly used to
* do fundamental reset before PCI enumeration in PCI core.
* When probing root complex and building its real slot,
* the operations will be copied over.
*/
static struct pci_slot *phb3_slot_create(struct phb *phb)
{
struct pci_slot *slot;
slot = pci_slot_alloc(phb, NULL);
if (!slot)
return slot;
/* Elementary functions */
slot->ops.get_presence_state = phb3_get_presence_state;
slot->ops.get_link_state = phb3_get_link_state;
slot->ops.get_power_state = NULL;
slot->ops.get_attention_state = NULL;
slot->ops.get_latch_state = NULL;
slot->ops.set_power_state = NULL;
slot->ops.set_attention_state = NULL;
/*
* For PHB slots, we have to split the fundamental reset
* into 2 steps. We might not have the first step which
* is to power off/on the slot, or it's controlled by
* individual platforms.
*/
slot->ops.prepare_link_change = phb3_prepare_link_change;
slot->ops.poll_link = phb3_poll_link;
slot->ops.hreset = phb3_hreset;
slot->ops.freset = phb3_freset;
slot->ops.creset = phb3_creset;
return slot;
}
static int64_t phb3_eeh_freeze_status(struct phb *phb, uint64_t pe_number,
uint8_t *freeze_state,
uint16_t *pci_error_type,
uint16_t *severity)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t peev_bit = PPC_BIT(pe_number & 0x3f);
uint64_t peev, pesta, pestb;
/* Defaults: not frozen */
*freeze_state = OPAL_EEH_STOPPED_NOT_FROZEN;
*pci_error_type = OPAL_EEH_NO_ERROR;
/* Check dead */
if (p->broken) {
*freeze_state = OPAL_EEH_STOPPED_MMIO_DMA_FREEZE;
*pci_error_type = OPAL_EEH_PHB_ERROR;
if (severity)
*severity = OPAL_EEH_SEV_PHB_DEAD;
return OPAL_HARDWARE;
}
/* Check fence and CAPP recovery */
if (phb3_fenced(p) || (p->flags & PHB3_CAPP_RECOVERY)) {
*freeze_state = OPAL_EEH_STOPPED_MMIO_DMA_FREEZE;
*pci_error_type = OPAL_EEH_PHB_ERROR;
if (severity)
*severity = OPAL_EEH_SEV_PHB_FENCED;
return OPAL_SUCCESS;
}
/* Check the PEEV */
phb3_ioda_sel(p, IODA2_TBL_PEEV, pe_number / 64, false);
peev = in_be64(p->regs + PHB_IODA_DATA0);
if (!(peev & peev_bit))
return OPAL_SUCCESS;
/* Indicate that we have an ER pending */
phb3_set_err_pending(p, true);
if (severity)
*severity = OPAL_EEH_SEV_PE_ER;
/* Read the PESTA & PESTB */
phb3_ioda_sel(p, IODA2_TBL_PESTA, pe_number, false);
pesta = in_be64(p->regs + PHB_IODA_DATA0);
phb3_ioda_sel(p, IODA2_TBL_PESTB, pe_number, false);
pestb = in_be64(p->regs + PHB_IODA_DATA0);
/* Convert them */
if (pesta & IODA2_PESTA_MMIO_FROZEN)
*freeze_state |= OPAL_EEH_STOPPED_MMIO_FREEZE;
if (pestb & IODA2_PESTB_DMA_STOPPED)
*freeze_state |= OPAL_EEH_STOPPED_DMA_FREEZE;
return OPAL_SUCCESS;
}
static int64_t phb3_eeh_freeze_clear(struct phb *phb, uint64_t pe_number,
uint64_t eeh_action_token)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t err, peev[4];
int32_t i;
bool frozen_pe = false;
if (p->broken)
return OPAL_HARDWARE;
/* Summary. If nothing, move to clearing the PESTs which can
* contain a freeze state from a previous error or simply set
* explicitely by the user
*/
err = in_be64(p->regs + PHB_ETU_ERR_SUMMARY);
if (err == 0xffffffffffffffffUL) {
if (phb3_fenced(p)) {
PHBERR(p, "eeh_freeze_clear on fenced PHB\n");
return OPAL_HARDWARE;
}
}
if (err != 0)
phb3_err_ER_clear(p);
/*
* We have PEEV in system memory. It would give more performance
* to access that directly.
*/
if (eeh_action_token & OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO) {
phb3_ioda_sel(p, IODA2_TBL_PESTA, pe_number, false);
out_be64(p->regs + PHB_IODA_DATA0, 0);
}
if (eeh_action_token & OPAL_EEH_ACTION_CLEAR_FREEZE_DMA) {
phb3_ioda_sel(p, IODA2_TBL_PESTB, pe_number, false);
out_be64(p->regs + PHB_IODA_DATA0, 0);
}
/* Update ER pending indication */
phb3_ioda_sel(p, IODA2_TBL_PEEV, 0, true);
for (i = 0; i < ARRAY_SIZE(peev); i++) {
peev[i] = in_be64(p->regs + PHB_IODA_DATA0);
if (peev[i]) {
frozen_pe = true;
break;
}
}
if (frozen_pe) {
p->err.err_src = PHB3_ERR_SRC_PHB;
p->err.err_class = PHB3_ERR_CLASS_ER;
p->err.err_bit = -1;
phb3_set_err_pending(p, true);
} else
phb3_set_err_pending(p, false);
return OPAL_SUCCESS;
}
static int64_t phb3_eeh_freeze_set(struct phb *phb, uint64_t pe_number,
uint64_t eeh_action_token)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t data;
if (p->broken)
return OPAL_HARDWARE;
if (pe_number >= PHB3_MAX_PE_NUM)
return OPAL_PARAMETER;
if (eeh_action_token != OPAL_EEH_ACTION_SET_FREEZE_MMIO &&
eeh_action_token != OPAL_EEH_ACTION_SET_FREEZE_DMA &&
eeh_action_token != OPAL_EEH_ACTION_SET_FREEZE_ALL)
return OPAL_PARAMETER;
if (eeh_action_token & OPAL_EEH_ACTION_SET_FREEZE_MMIO) {
phb3_ioda_sel(p, IODA2_TBL_PESTA, pe_number, false);
data = in_be64(p->regs + PHB_IODA_DATA0);
data |= IODA2_PESTA_MMIO_FROZEN;
out_be64(p->regs + PHB_IODA_DATA0, data);
}
if (eeh_action_token & OPAL_EEH_ACTION_SET_FREEZE_DMA) {
phb3_ioda_sel(p, IODA2_TBL_PESTB, pe_number, false);
data = in_be64(p->regs + PHB_IODA_DATA0);
data |= IODA2_PESTB_DMA_STOPPED;
out_be64(p->regs + PHB_IODA_DATA0, data);
}
return OPAL_SUCCESS;
}
static int64_t phb3_eeh_next_error(struct phb *phb,
uint64_t *first_frozen_pe,
uint16_t *pci_error_type,
uint16_t *severity)
{
struct phb3 *p = phb_to_phb3(phb);
uint64_t fir, peev[4];
uint32_t cfg32;
int32_t i, j;
/* If the PHB is broken, we needn't go forward */
if (p->broken) {
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_PHB_DEAD;
return OPAL_SUCCESS;
}
if ((p->flags & PHB3_CAPP_RECOVERY)) {
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_PHB_FENCED;
return OPAL_SUCCESS;
}
/*
* Check if we already have pending errors. If that's
* the case, then to get more information about the
* pending errors. Here we try PBCQ prior to PHB.
*/
if (phb3_err_pending(p) &&
!phb3_err_check_pbcq(p) &&
!phb3_err_check_lem(p))
phb3_set_err_pending(p, false);
/* Clear result */
*pci_error_type = OPAL_EEH_NO_ERROR;
*severity = OPAL_EEH_SEV_NO_ERROR;
*first_frozen_pe = (uint64_t)-1;
/* Check frozen PEs */
if (!phb3_err_pending(p)) {
phb3_ioda_sel(p, IODA2_TBL_PEEV, 0, true);
for (i = 0; i < ARRAY_SIZE(peev); i++) {
peev[i] = in_be64(p->regs + PHB_IODA_DATA0);
if (peev[i]) {
p->err.err_src = PHB3_ERR_SRC_PHB;
p->err.err_class = PHB3_ERR_CLASS_ER;
p->err.err_bit = -1;
phb3_set_err_pending(p, true);
break;
}
}
}
/* Mapping errors */
if (phb3_err_pending(p)) {
/*
* If the frozen PE is caused by a malfunctioning TLP, we
* need reset the PHB. So convert ER to PHB-fatal error
* for the case.
*/
if (p->err.err_class == PHB3_ERR_CLASS_ER) {
fir = phb3_read_reg_asb(p, PHB_LEM_FIR_ACCUM);
if (fir & PPC_BIT(60)) {
phb3_pcicfg_read32(&p->phb, 0,
p->aercap + PCIECAP_AER_UE_STATUS, &cfg32);
if (cfg32 & PCIECAP_AER_UE_MALFORMED_TLP)
p->err.err_class = PHB3_ERR_CLASS_FENCED;
}
}
switch (p->err.err_class) {
case PHB3_ERR_CLASS_DEAD:
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_PHB_DEAD;
break;
case PHB3_ERR_CLASS_FENCED:
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_PHB_FENCED;
break;
case PHB3_ERR_CLASS_ER:
*pci_error_type = OPAL_EEH_PE_ERROR;
*severity = OPAL_EEH_SEV_PE_ER;
phb3_ioda_sel(p, IODA2_TBL_PEEV, 0, true);
for (i = 0; i < ARRAY_SIZE(peev); i++)
peev[i] = in_be64(p->regs + PHB_IODA_DATA0);
for (i = ARRAY_SIZE(peev) - 1; i >= 0; i--) {
for (j = 0; j < 64; j++) {
if (peev[i] & PPC_BIT(j)) {
*first_frozen_pe = i * 64 + j;
break;
}
}
if (*first_frozen_pe != (uint64_t)(-1))
break;
}
/* No frozen PE ? */
if (*first_frozen_pe == (uint64_t)-1) {
*pci_error_type = OPAL_EEH_NO_ERROR;
*severity = OPAL_EEH_SEV_NO_ERROR;
phb3_set_err_pending(p, false);
}
break;
case PHB3_ERR_CLASS_INF:
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_INF;
break;
default:
*pci_error_type = OPAL_EEH_NO_ERROR;
*severity = OPAL_EEH_SEV_NO_ERROR;
phb3_set_err_pending(p, false);
}
}
return OPAL_SUCCESS;
}
static int64_t phb3_err_inject_finalize(struct phb3 *p, uint64_t addr,
uint64_t mask, uint64_t ctrl,
bool is_write)
{
if (is_write)
ctrl |= PHB_PAPR_ERR_INJ_CTL_WR;
else
ctrl |= PHB_PAPR_ERR_INJ_CTL_RD;
out_be64(p->regs + PHB_PAPR_ERR_INJ_ADDR, addr);
out_be64(p->regs + PHB_PAPR_ERR_INJ_MASK, mask);
out_be64(p->regs + PHB_PAPR_ERR_INJ_CTL, ctrl);
return OPAL_SUCCESS;
}
static int64_t phb3_err_inject_mem32(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask,
bool is_write)
{
uint64_t base, len, segstart, segsize;
uint64_t a, m;
uint64_t ctrl = PHB_PAPR_ERR_INJ_CTL_OUTB;
uint32_t index;
segsize = (M32_PCI_SIZE / PHB3_MAX_PE_NUM);
a = base = len = 0x0ull;
for (index = 0; index < PHB3_MAX_PE_NUM; index++) {
if (GETFIELD(IODA2_M32DT_PE, p->m32d_cache[index]) != pe_number)
continue;
/* Obviously, we can't support discontiguous segments.
* We have to pick the first batch of contiguous segments
* for that case
*/
segstart = p->mm1_base + segsize * index;
if (!len) {
base = segstart;
len = segsize;
} else if ((base + len) == segstart) {
len += segsize;
}
/* Check the specified address is valid one */
if (addr >= segstart && addr < (segstart + segsize)) {
a = addr;
break;
}
}
/* No MM32 segments assigned to the PE */
if (!len)
return OPAL_PARAMETER;
/* Specified address is out of range */
if (!a) {
a = base;
len = len & ~(len - 1);
m = ~(len - 1);
} else {
m = mask;
}
a = SETFIELD(PHB_PAPR_ERR_INJ_ADDR_MMIO, 0x0ull, a);
m = SETFIELD(PHB_PAPR_ERR_INJ_MASK_MMIO, 0x0ull, m);
return phb3_err_inject_finalize(p, a, m, ctrl, is_write);
}
static int64_t phb3_err_inject_mem64(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask,
bool is_write)
{
uint64_t base, len, segstart, segsize;
uint64_t cache, a, m;
uint64_t ctrl = PHB_PAPR_ERR_INJ_CTL_OUTB;
uint32_t index, s_index, e_index;
/* By default, the PE is PCI device dependent one */
s_index = 0;
e_index = ARRAY_SIZE(p->m64b_cache) - 2;
for (index = 0; index < RTT_TABLE_ENTRIES; index++) {
if (p->rte_cache[index] != pe_number)
continue;
if (index + 8 >= RTT_TABLE_ENTRIES)
break;
/* PCI bus dependent PE */
if (p->rte_cache[index + 8] == pe_number) {
s_index = e_index = ARRAY_SIZE(p->m64b_cache) - 1;
break;
}
}
a = base = len = 0x0ull;
for (index = s_index; !len && index <= e_index; index++) {
cache = p->m64b_cache[index];
if (!(cache & IODA2_M64BT_ENABLE))
continue;
if (cache & IODA2_M64BT_SINGLE_PE) {
if (GETFIELD(IODA2_M64BT_PE_HI, cache) != (pe_number >> 5) ||
GETFIELD(IODA2_M64BT_PE_LOW, cache) != (pe_number & 0x1f))
continue;
segstart = GETFIELD(IODA2_M64BT_SINGLE_BASE, cache);
segstart <<= 25; /* 32MB aligned */
segsize = GETFIELD(IODA2_M64BT_SINGLE_MASK, cache);
segsize = (0x2000000ull - segsize) << 25;
} else {
segstart = GETFIELD(IODA2_M64BT_BASE, cache);
segstart <<= 20; /* 1MB aligned */
segsize = GETFIELD(IODA2_M64BT_MASK, cache);
segsize = (0x40000000ull - segsize) << 20;
segsize /= PHB3_MAX_PE_NUM;
segstart = segstart + segsize * pe_number;
}
/* First window always wins based on the ascending
* searching priority the 16 BARs have. We're using
* the feature to assign resource for SRIOV VFs.
*/
if (!len) {
base = segstart;
len = segsize;
}
/* Specified address is valid one */
if (addr >= segstart && addr < (segstart + segsize)) {
a = addr;
}
}
/* No MM64 segments assigned to the PE */
if (!len)
return OPAL_PARAMETER;
/* Address specified or calculated */
if (!a) {
a = base;
len = len & ~(len - 1);
m = ~(len - 1);
} else {
m = mask;
}
a = SETFIELD(PHB_PAPR_ERR_INJ_ADDR_MMIO, 0x0ull, a);
m = SETFIELD(PHB_PAPR_ERR_INJ_MASK_MMIO, 0x0ull, m);
return phb3_err_inject_finalize(p, a, m, ctrl, is_write);
}
static int64_t phb3_err_inject_cfg(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask,
bool is_write)
{
uint64_t a, m, prefer;
uint64_t ctrl = PHB_PAPR_ERR_INJ_CTL_CFG;
int bdfn;
bool is_bus_pe;
a = 0xffffull;
prefer = 0xffffull;
m = PHB_PAPR_ERR_INJ_MASK_CFG_ALL;
for (bdfn = 0; bdfn < RTT_TABLE_ENTRIES; bdfn++) {
if (p->rte_cache[bdfn] != pe_number)
continue;
/* The PE can be associated with PCI bus or device */
is_bus_pe = false;
if ((bdfn + 8) < RTT_TABLE_ENTRIES &&
p->rte_cache[bdfn + 8] == pe_number)
is_bus_pe = true;
/* Figure out the PCI config address */
if (prefer == 0xffffull) {
if (is_bus_pe) {
m = PHB_PAPR_ERR_INJ_MASK_CFG;
prefer = SETFIELD(m, 0x0ull, (bdfn >> 8));
} else {
m = PHB_PAPR_ERR_INJ_MASK_CFG_ALL;
prefer = SETFIELD(m, 0x0ull, bdfn);
}
}
/* Check the input address is valid or not */
if (!is_bus_pe &&
GETFIELD(PHB_PAPR_ERR_INJ_MASK_CFG_ALL, addr) == bdfn) {
a = addr;
break;
}
if (is_bus_pe &&
GETFIELD(PHB_PAPR_ERR_INJ_MASK_CFG, addr) == (bdfn >> 8)) {
a = addr;
break;
}
}
/* Invalid PE number */
if (prefer == 0xffffull)
return OPAL_PARAMETER;
/* Specified address is out of range */
if (a == 0xffffull)
a = prefer;
else
m = mask;
return phb3_err_inject_finalize(p, a, m, ctrl, is_write);
}
static int64_t phb3_err_inject_dma(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask,
bool is_write, bool is_64bits)
{
uint32_t index, page_size;
uint64_t tve, table_entries;
uint64_t base, start, end, len, a, m;
uint64_t ctrl = PHB_PAPR_ERR_INJ_CTL_INB;
/* TVE index and base address */
if (!is_64bits) {
index = (pe_number << 1);
base = 0x0ull;
} else {
index = ((pe_number << 1) + 1);
base = (0x1ull << 59);
}
/* Raw data of table entries and page size */
tve = p->tve_cache[index];
table_entries = GETFIELD(IODA2_TVT_TCE_TABLE_SIZE, tve);
table_entries = (0x1ull << (table_entries + 8));
page_size = GETFIELD(IODA2_TVT_IO_PSIZE, tve);
if (!page_size && !(tve & PPC_BIT(51)))
return OPAL_UNSUPPORTED;
/* Check the page size */
switch (page_size) {
case 0: /* bypass */
start = ((tve & (0x3ull << 10)) << 14) |
((tve & (0xffffffull << 40)) >> 40);
end = ((tve & (0x3ull << 8)) << 16) |
((tve & (0xffffffull << 16)) >> 16);
/* 16MB aligned size */
len = (end - start) << 24;
break;
case 5: /* 64KB */
len = table_entries * 0x10000ull;
break;
case 13: /* 16MB */
len = table_entries * 0x1000000ull;
break;
case 17: /* 256MB */
len = table_entries * 0x10000000ull;
break;
case 1: /* 4KB */
default:
len = table_entries * 0x1000ull;
}
/* The specified address is in range */
if (addr && addr >= base && addr < (base + len)) {
a = addr;
m = mask;
} else {
a = base;
len = len & ~(len - 1);
m = ~(len - 1);
}
return phb3_err_inject_finalize(p, a, m, ctrl, is_write);
}
static int64_t phb3_err_inject_dma32(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask,
bool is_write)
{
return phb3_err_inject_dma(p, pe_number, addr, mask, is_write, false);
}
static int64_t phb3_err_inject_dma64(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask,
bool is_write)
{
return phb3_err_inject_dma(p, pe_number, addr, mask, is_write, true);
}
static int64_t phb3_err_inject(struct phb *phb, uint64_t pe_number,
uint32_t type, uint32_t func,
uint64_t addr, uint64_t mask)
{
struct phb3 *p = phb_to_phb3(phb);
int64_t (*handler)(struct phb3 *p, uint64_t pe_number,
uint64_t addr, uint64_t mask, bool is_write);
bool is_write;
/* How could we get here without valid RTT? */
if (!p->tbl_rtt)
return OPAL_HARDWARE;
/* We can't inject error to the reserved PE */
if (pe_number == PHB3_RESERVED_PE_NUM || pe_number >= PHB3_MAX_PE_NUM)
return OPAL_PARAMETER;
/* Clear leftover from last time */
out_be64(p->regs + PHB_PAPR_ERR_INJ_CTL, 0x0ul);
switch (func) {
case OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR:
case OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_DATA:
is_write = false;
if (type == OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64)
handler = phb3_err_inject_mem64;
else
handler = phb3_err_inject_mem32;
break;
case OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_ADDR:
case OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_DATA:
is_write = true;
if (type == OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64)
handler = phb3_err_inject_mem64;
else
handler = phb3_err_inject_mem32;
break;
case OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_ADDR:
case OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_DATA:
is_write = false;
handler = phb3_err_inject_cfg;
break;
case OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_ADDR:
case OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_DATA:
is_write = true;
handler = phb3_err_inject_cfg;
break;
case OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_ADDR:
case OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_DATA:
case OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_MASTER:
case OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_TARGET:
is_write = false;
if (type == OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64)
handler = phb3_err_inject_dma64;
else
handler = phb3_err_inject_dma32;
break;
case OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_ADDR:
case OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_DATA:
case OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_MASTER:
case OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET:
is_write = true;
if (type == OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64)
handler = phb3_err_inject_dma64;
else
handler = phb3_err_inject_dma32;
break;
default:
return OPAL_PARAMETER;
}
return handler(p, pe_number, addr, mask, is_write);
}
static int64_t phb3_get_diag_data(struct phb *phb,
void *diag_buffer,
uint64_t diag_buffer_len)
{
struct phb3 *p = phb_to_phb3(phb);
struct OpalIoPhb3ErrorData *data = diag_buffer;
bool fenced;
if (diag_buffer_len < sizeof(struct OpalIoPhb3ErrorData))
return OPAL_PARAMETER;
if (p->broken)
return OPAL_HARDWARE;
/*
* Dummy check for fence so that phb3_read_phb_status knows
* whether to use ASB or AIB
*/
fenced = phb3_fenced(p);
phb3_read_phb_status(p, data);
if (!fenced)
phb3_eeh_dump_regs(p, data);
/*
* We're running to here probably because of errors
* (INF class). For that case, we need clear the error
* explicitly.
*/
if (phb3_err_pending(p) &&
p->err.err_class == PHB3_ERR_CLASS_INF &&
p->err.err_src == PHB3_ERR_SRC_PHB) {
phb3_err_ER_clear(p);
phb3_set_err_pending(p, false);
}
return OPAL_SUCCESS;
}
static int64_t phb3_get_capp_info(int chip_id, struct phb *phb,
struct capp_info *info)
{
struct phb3 *p = phb_to_phb3(phb);
struct proc_chip *chip = get_chip(p->chip_id);
uint32_t offset;
if (chip_id != p->chip_id)
return OPAL_PARAMETER;
if (!((1 << p->index) & chip->capp_phb3_attached_mask))
return OPAL_PARAMETER;
offset = PHB3_CAPP_REG_OFFSET(p);
if (PHB3_IS_NAPLES(p)) {
if (p->index == 0)
info->capp_index = 0;
else
info->capp_index = 1;
} else
info->capp_index = 0;
info->phb_index = p->index;
info->capp_fir_reg = CAPP_FIR + offset;
info->capp_fir_mask_reg = CAPP_FIR_MASK + offset;
info->capp_fir_action0_reg = CAPP_FIR_ACTION0 + offset;
info->capp_fir_action1_reg = CAPP_FIR_ACTION1 + offset;
info->capp_err_status_ctrl_reg = CAPP_ERR_STATUS_CTRL + offset;
return OPAL_SUCCESS;
}
static void phb3_init_capp_regs(struct phb3 *p, bool dma_mode)
{
uint64_t reg;
uint32_t offset;
uint64_t read_buffers = 0;
offset = PHB3_CAPP_REG_OFFSET(p);
xscom_read(p->chip_id, APC_MASTER_PB_CTRL + offset, &reg);
reg &= ~PPC_BITMASK(10, 11);
reg |= PPC_BIT(3);
if (dma_mode) {
/* In DMA mode, the CAPP only owns some of the PHB read buffers */
read_buffers = 0x1;
/*
* HW301991 - XSL sends PTE updates with nodal scope instead of
* group scope. The workaround is to force all commands to
* unlimited scope by setting bit 4. This may have a slight
* performance impact, but it would be negligible on the XSL.
* To avoid the possibility it might impact other cards, key it
* off DMA mode since the XSL based Mellanox CX4 is the only
* card to use this mode in P8 timeframe:
*/
reg |= PPC_BIT(4);
}
reg |= read_buffers << PPC_BITLSHIFT(11);
xscom_write(p->chip_id, APC_MASTER_PB_CTRL + offset, reg);
/* Dynamically workout which PHB to connect to port 0 of the CAPP.
* Here is the table from the CAPP workbook:
* APC_MASTER CAPP CAPP
* bits 1:3 port0 port1
* 000 disabled disabled
* * 001 PHB2 disabled
* * 010 PHB1 disabled
* 011 PHB1 PHB2
* * 100 PHB0 disabled
* 101 PHB0 PHB2
* 110 PHB0 PHB1
*
* We don't use port1 so only those starred above are used.
* Hence reduce table to:
* PHB0 -> APC MASTER(bits 1:3) = 0b100
* PHB1 -> APC MASTER(bits 1:3) = 0b010
* PHB2 -> APC MASTER(bits 1:3) = 0b001
*
* Note: Naples has two CAPP units, statically mapped:
* CAPP0/PHB0 -> APC MASTER(bits 1:3) = 0b100
* CAPP1/PHB1 -> APC MASTER(bits 1:3) = 0b010
*/
reg = 0x4000000000000000ULL >> p->index;
reg |= 0x0070000000000000UL;
xscom_write(p->chip_id, APC_MASTER_CAPI_CTRL + offset, reg);
PHBINF(p, "CAPP: port attached\n");
/* tlb and mmio */
xscom_write(p->chip_id, TRANSPORT_CONTROL + offset, 0x4028000104000000UL);
xscom_write(p->chip_id, CANNED_PRESP_MAP0 + offset, 0);
xscom_write(p->chip_id, CANNED_PRESP_MAP1 + offset, 0xFFFFFFFF00000000UL);
xscom_write(p->chip_id, CANNED_PRESP_MAP2 + offset, 0);
/* error recovery */
xscom_write(p->chip_id, CAPP_ERR_STATUS_CTRL + offset, 0);
xscom_write(p->chip_id, FLUSH_SUE_STATE_MAP + offset,
0x1DC20B6600000000UL);
xscom_write(p->chip_id, CAPP_EPOCH_TIMER_CTRL + offset,
0xC0000000FFF0FFE0UL);
xscom_write(p->chip_id, FLUSH_UOP_CONFIG1 + offset,
0xB188280728000000UL);
xscom_write(p->chip_id, FLUSH_UOP_CONFIG2 + offset, 0xB188400F00000000UL);
reg = 0xA1F0000000000000UL;
reg |= read_buffers << PPC_BITLSHIFT(39);
xscom_write(p->chip_id, SNOOP_CAPI_CONFIG + offset, reg);
}
/* override some inits with CAPI defaults */
static void phb3_init_capp_errors(struct phb3 *p)
{
out_be64(p->regs + PHB_ERR_AIB_FENCE_ENABLE, 0xffffffdd8c80ffc0UL);
out_be64(p->regs + PHB_OUT_ERR_AIB_FENCE_ENABLE, 0x9cf3fe08f8dc700fUL);
out_be64(p->regs + PHB_INA_ERR_AIB_FENCE_ENABLE, 0xffff57fbff01ffdeUL);
out_be64(p->regs + PHB_INB_ERR_AIB_FENCE_ENABLE, 0xfcffe0fbff7ff0ecUL);
out_be64(p->regs + PHB_LEM_ERROR_MASK, 0x40018e2400022482UL);
}
/*
* Enable CAPI mode on a PHB
*
* Changes to this init sequence may require updating disable_capi_mode().
*/
static int64_t enable_capi_mode(struct phb3 *p, uint64_t pe_number, bool dma_mode)
{
uint64_t reg;
int i;
xscom_read(p->chip_id, PE_CAPP_EN + PE_REG_OFFSET(p), &reg);
if (reg & PPC_BIT(0)) {
PHBDBG(p, "Already in CAPP mode\n");
}
/* poll cqstat */
for (i = 0; i < 500000; i++) {
xscom_read(p->chip_id, p->pe_xscom + 0xf, &reg);
if (!(reg & 0xC000000000000000UL))
break;
time_wait_us(10);
}
if (reg & 0xC000000000000000UL) {
PHBERR(p, "CAPP: Timeout waiting for pending transaction\n");
return OPAL_HARDWARE;
}
/* pb aib capp enable */
reg = PPC_BIT(0); /* capp enable */
if (dma_mode)
reg |= PPC_BIT(1); /* capp dma mode */
xscom_write(p->chip_id, p->spci_xscom + 0x3, reg);
/* FIXME security timer bar
xscom_write(p->chip_id, p->spci_xscom + 0x4, 0x8000000000000000ull);
*/
/* aib mode */
xscom_read(p->chip_id, p->pci_xscom + 0xf, &reg);
reg &= ~PPC_BITMASK(6,7);
reg |= PPC_BIT(8);
reg |= PPC_BITMASK(40, 41);
reg &= ~PPC_BIT(42);
xscom_write(p->chip_id, p->pci_xscom + 0xf, reg);
/* pci hwconf0 */
xscom_read(p->chip_id, p->pe_xscom + 0x18, &reg);
reg |= PPC_BIT(14);
reg &= ~PPC_BIT(15);
xscom_write(p->chip_id, p->pe_xscom + 0x18, reg);
/* pci hwconf1 */
xscom_read(p->chip_id, p->pe_xscom + 0x19, &reg);
reg &= ~PPC_BITMASK(17,18);
xscom_write(p->chip_id, p->pe_xscom + 0x19, reg);
/* aib tx cmd cred */
xscom_read(p->chip_id, p->pci_xscom + 0xd, &reg);
if (dma_mode) {
/*
* In DMA mode, increase AIB credit value for ch 2 (DMA read)
* for performance reasons
*/
reg &= ~PPC_BITMASK(42, 47);
reg |= PPC_BITMASK(43, 45);
} else {
reg &= ~PPC_BITMASK(42, 46);
reg |= PPC_BIT(47);
}
xscom_write(p->chip_id, p->pci_xscom + 0xd, reg);
xscom_write(p->chip_id, p->pci_xscom + 0xc, 0xff00000000000000ull);
/* pci mode ctl */
xscom_read(p->chip_id, p->pe_xscom + 0xb, &reg);
reg |= PPC_BIT(25);
xscom_write(p->chip_id, p->pe_xscom + 0xb, reg);
/* set tve no translate mode allow mmio window */
memset(p->tve_cache, 0x0, sizeof(p->tve_cache));
if (dma_mode) {
/*
* CAPP DMA mode needs access to all of memory, set address
* range to 0x0000000000000000: 0x0002FFFFFFFFFFF
*/
p->tve_cache[pe_number * 2] = 0x000000FFFFFF0200ULL;
} else {
/* Allow address range 0x0002000000000000: 0x0002FFFFFFFFFFF */
p->tve_cache[pe_number * 2] = 0x000000FFFFFF0a00ULL;
}
phb3_ioda_sel(p, IODA2_TBL_TVT, 0, true);
for (i = 0; i < ARRAY_SIZE(p->tve_cache); i++)
out_be64(p->regs + PHB_IODA_DATA0, p->tve_cache[i]);
/* set m64 bar to pass mmio window */
memset(p->m64b_cache, 0x0, sizeof(p->m64b_cache));
p->m64b_cache[0] = PPC_BIT(0); /*enable*/
p->m64b_cache[0] |= PPC_BIT(1); /*single pe*/
p->m64b_cache[0] |= (p->mm0_base << 12) | ((pe_number & 0x3e0) << 27); /*base and upper pe*/
p->m64b_cache[0] |= 0x3fffc000 | (pe_number & 0x1f); /*mask and lower pe*/
p->m64b_cache[1] = PPC_BIT(0); /*enable*/
p->m64b_cache[1] |= PPC_BIT(1); /*single pe*/
p->m64b_cache[1] |= (0x0002000000000000ULL << 12) | ((pe_number & 0x3e0) << 27); /*base and upper pe*/
p->m64b_cache[1] |= 0x3f000000 | (pe_number & 0x1f); /*mask and lower pe*/
phb3_ioda_sel(p, IODA2_TBL_M64BT, 0, true);
for (i = 0; i < ARRAY_SIZE(p->m64b_cache); i++)
out_be64(p->regs + PHB_IODA_DATA0, p->m64b_cache[i]);
out_be64(p->regs + PHB_PHB3_CONFIG, PHB_PHB3C_64B_TCE_EN);
out_be64(p->regs + PHB_PHB3_CONFIG, PHB_PHB3C_64BIT_MSI_EN);
phb3_init_capp_errors(p);
phb3_init_capp_regs(p, dma_mode);
if (!chiptod_capp_timebase_sync(p->chip_id, CAPP_TFMR, CAPP_TB,
PHB3_CAPP_REG_OFFSET(p))) {
PHBERR(p, "CAPP: Failed to sync timebase\n");
return OPAL_HARDWARE;
}
/* set callbacks to handle HMI events */
capi_ops.get_capp_info = &phb3_get_capp_info;
return OPAL_SUCCESS;
}
static int64_t phb3_set_capi_mode(struct phb *phb, uint64_t mode,
uint64_t pe_number)
{
struct phb3 *p = phb_to_phb3(phb);
struct proc_chip *chip = get_chip(p->chip_id);
uint64_t reg;
uint64_t read_buffers;
uint32_t offset;
u8 mask;
if (!capp_ucode_loaded(chip, p->index)) {
PHBERR(p, "CAPP: ucode not loaded\n");
return OPAL_RESOURCE;
}
lock(&capi_lock);
if (PHB3_IS_NAPLES(p)) {
/* Naples has two CAPP units, statically mapped. */
chip->capp_phb3_attached_mask |= 1 << p->index;
} else {
/*
* Check if CAPP port is being used by any another PHB.
* Check and set chip->capp_phb3_attached_mask atomically
* incase two phb3_set_capi_mode() calls race.
*/
mask = ~(1 << p->index);
if (chip->capp_phb3_attached_mask & mask) {
PHBERR(p,
"CAPP: port already in use by another PHB:%x\n",
chip->capp_phb3_attached_mask);
unlock(&capi_lock);
return false;
}
chip->capp_phb3_attached_mask = 1 << p->index;
}
unlock(&capi_lock);
offset = PHB3_CAPP_REG_OFFSET(p);
xscom_read(p->chip_id, CAPP_ERR_STATUS_CTRL + offset, &reg);
if ((reg & PPC_BIT(5))) {
PHBERR(p, "CAPP: recovery failed (%016llx)\n", reg);
return OPAL_HARDWARE;
} else if ((reg & PPC_BIT(0)) && (!(reg & PPC_BIT(1)))) {
PHBDBG(p, "CAPP: recovery in progress\n");
return OPAL_BUSY;
}
switch (mode) {
case OPAL_PHB_CAPI_MODE_PCIE:
/* Switching back to PCIe mode requires a creset */
return OPAL_UNSUPPORTED;
case OPAL_PHB_CAPI_MODE_CAPI:
return enable_capi_mode(p, pe_number, false);
case OPAL_PHB_CAPI_MODE_DMA:
return enable_capi_mode(p, pe_number, true);
case OPAL_PHB_CAPI_MODE_SNOOP_OFF:
xscom_write(p->chip_id, SNOOP_CAPI_CONFIG + offset,
0x0000000000000000);
return OPAL_SUCCESS;
case OPAL_PHB_CAPI_MODE_SNOOP_ON:
xscom_write(p->chip_id, CAPP_ERR_STATUS_CTRL + offset,
0x0000000000000000);
/*
* Make sure the PHB read buffers being snooped match those
* being used so we don't need another mode to set SNOOP+DMA
*/
xscom_read(p->chip_id, APC_MASTER_PB_CTRL + offset, &reg);
read_buffers = (reg >> PPC_BITLSHIFT(11)) & 0x3;
reg = 0xA1F0000000000000UL;
reg |= read_buffers << PPC_BITLSHIFT(39);
xscom_write(p->chip_id, SNOOP_CAPI_CONFIG + offset, reg);
return OPAL_SUCCESS;
}
return OPAL_UNSUPPORTED;
}
static int64_t phb3_set_capp_recovery(struct phb *phb)
{
struct phb3 *p = phb_to_phb3(phb);
if (p->flags & PHB3_CAPP_RECOVERY)
return 0;
/* set opal event flag to indicate eeh condition */
opal_update_pending_evt(OPAL_EVENT_PCI_ERROR,
OPAL_EVENT_PCI_ERROR);
p->flags |= PHB3_CAPP_RECOVERY;
return 0;
}
static const struct phb_ops phb3_ops = {
.cfg_read8 = phb3_pcicfg_read8,
.cfg_read16 = phb3_pcicfg_read16,
.cfg_read32 = phb3_pcicfg_read32,
.cfg_write8 = phb3_pcicfg_write8,
.cfg_write16 = phb3_pcicfg_write16,
.cfg_write32 = phb3_pcicfg_write32,
.choose_bus = phb3_choose_bus,
.get_reserved_pe_number = phb3_get_reserved_pe_number,
.device_init = phb3_device_init,
.device_remove = phb3_device_remove,
.ioda_reset = phb3_ioda_reset,
.papr_errinjct_reset = phb3_papr_errinjct_reset,
.pci_reinit = phb3_pci_reinit,
.set_phb_mem_window = phb3_set_phb_mem_window,
.phb_mmio_enable = phb3_phb_mmio_enable,
.map_pe_mmio_window = phb3_map_pe_mmio_window,
.map_pe_dma_window = phb3_map_pe_dma_window,
.map_pe_dma_window_real = phb3_map_pe_dma_window_real,
.pci_msi_eoi = phb3_pci_msi_eoi,
.set_xive_pe = phb3_set_ive_pe,
.get_msi_32 = phb3_get_msi_32,
.get_msi_64 = phb3_get_msi_64,
.set_pe = phb3_set_pe,
.set_peltv = phb3_set_peltv,
.eeh_freeze_status = phb3_eeh_freeze_status,
.eeh_freeze_clear = phb3_eeh_freeze_clear,
.eeh_freeze_set = phb3_eeh_freeze_set,
.next_error = phb3_eeh_next_error,
.err_inject = phb3_err_inject,
.get_diag_data2 = phb3_get_diag_data,
.set_capi_mode = phb3_set_capi_mode,
.set_capp_recovery = phb3_set_capp_recovery,
};
/*
* We should access those registers at the stage since the
* AIB isn't ready yet.
*/
static void phb3_setup_aib(struct phb3 *p)
{
/* Init_2 - AIB TX Channel Mapping Register */
phb3_write_reg_asb(p, PHB_AIB_TX_CHAN_MAPPING, 0x0211230000000000UL);
/* Init_3 - AIB RX command credit register */
if (p->rev >= PHB3_REV_VENICE_DD20)
phb3_write_reg_asb(p, PHB_AIB_RX_CMD_CRED, 0x0020000100020001UL);
else
phb3_write_reg_asb(p, PHB_AIB_RX_CMD_CRED, 0x0020000100010001UL);
/* Init_4 - AIB rx data credit register */
if (p->rev >= PHB3_REV_VENICE_DD20)
phb3_write_reg_asb(p, PHB_AIB_RX_DATA_CRED, 0x0020002000010001UL);
else
phb3_write_reg_asb(p, PHB_AIB_RX_DATA_CRED, 0x0020002000000001UL);
/* Init_5 - AIB rx credit init timer register */
phb3_write_reg_asb(p, PHB_AIB_RX_CRED_INIT_TIMER, 0x0f00000000000000UL);
/* Init_6 - AIB Tag Enable register */
phb3_write_reg_asb(p, PHB_AIB_TAG_ENABLE, 0xffffffff00000000UL);
/* Init_7 - TCE Tag Enable register */
phb3_write_reg_asb(p, PHB_TCE_TAG_ENABLE, 0xffffffff00000000UL);
}
static void phb3_init_ioda2(struct phb3 *p)
{
/* Init_14 - LSI Source ID */
out_be64(p->regs + PHB_LSI_SOURCE_ID,
SETFIELD(PHB_LSI_SRC_ID, 0ul, 0xff));
/* Init_15 - IVT BAR / Length
* Init_16 - RBA BAR
* - RTT BAR
* Init_17 - PELT-V BAR
*/
out_be64(p->regs + PHB_RTT_BAR,
p->tbl_rtt | PHB_RTT_BAR_ENABLE);
out_be64(p->regs + PHB_PELTV_BAR,
p->tbl_peltv | PHB_PELTV_BAR_ENABLE);
out_be64(p->regs + PHB_IVT_BAR,
p->tbl_ivt | 0x800 | PHB_IVT_BAR_ENABLE);
/* DD2.0 or the subsequent chips don't have memory
* resident RBA.
*/
if (p->rev >= PHB3_REV_MURANO_DD20)
out_be64(p->regs + PHB_RBA_BAR, 0x0ul);
else
out_be64(p->regs + PHB_RBA_BAR,
p->tbl_rba | PHB_RBA_BAR_ENABLE);
/* Init_18..21 - Setup M32 */
out_be64(p->regs + PHB_M32_BASE_ADDR, p->mm1_base);
out_be64(p->regs + PHB_M32_BASE_MASK, ~(M32_PCI_SIZE - 1));
out_be64(p->regs + PHB_M32_START_ADDR, M32_PCI_START);
/* Init_22 - Setup PEST BAR */
out_be64(p->regs + PHB_PEST_BAR,
p->tbl_pest | PHB_PEST_BAR_ENABLE);
/* Init_23 - PCIE Outbound upper address */
out_be64(p->regs + PHB_M64_UPPER_BITS, 0);
/* Init_24 - Interrupt represent timers
* The register doesn't take effect on Murano DD1.0
*/
if (p->rev >= PHB3_REV_NAPLES_DD10)
out_be64(p->regs + PHB_INTREP_TIMER, 0x0014000000000000UL);
else if (p->rev >= PHB3_REV_MURANO_DD20)
out_be64(p->regs + PHB_INTREP_TIMER, 0x0004000000000000UL);
else
out_be64(p->regs + PHB_INTREP_TIMER, 0);
/* Init_25 - PHB3 Configuration Register. Clear TCE cache then
* configure the PHB
*/
out_be64(p->regs + PHB_PHB3_CONFIG, PHB_PHB3C_64B_TCE_EN);
out_be64(p->regs + PHB_PHB3_CONFIG,
PHB_PHB3C_M32_EN | PHB_PHB3C_32BIT_MSI_EN |
PHB_PHB3C_64BIT_MSI_EN);
/* Init_26 - At least 512ns delay according to spec */
time_wait_us(2);
/* Init_27..36 - On-chip IODA tables init */
phb3_ioda_reset(&p->phb, false);
}
static bool phb3_wait_dlp_reset(struct phb3 *p)
{
unsigned int i;
uint64_t val;
/*
* Firmware cannot access the UTL core regs or PCI config space
* until the cores are out of DL_PGRESET.
* DL_PGRESET should be polled until it is inactive with a value
* of '0'. The recommended polling frequency is once every 1ms.
* Firmware should poll at least 200 attempts before giving up.
* MMIO Stores to the link are silently dropped by the UTL core if
* the link is down.
* MMIO Loads to the link will be dropped by the UTL core and will
* eventually time-out and will return an all ones response if the
* link is down.
*/
#define DLP_RESET_ATTEMPTS 40000
PHBDBG(p, "Waiting for DLP PG reset to complete...\n");
for (i = 0; i < DLP_RESET_ATTEMPTS; i++) {
val = in_be64(p->regs + PHB_PCIE_DLP_TRAIN_CTL);
if (!(val & PHB_PCIE_DLP_TC_DL_PGRESET))
break;
time_wait_us(10);
}
if (val & PHB_PCIE_DLP_TC_DL_PGRESET) {
PHBERR(p, "Timeout waiting for DLP PG reset !\n");
return false;
}
return true;
}
/* phb3_init_rc - Initialize the Root Complex config space
*/
static bool phb3_init_rc_cfg(struct phb3 *p)
{
int64_t ecap, aercap;
/* XXX Handle errors ? */
/* Init_45..46:
*
* Set primary bus to 0, secondary to 1 and subordinate to 0xff
*/
phb3_pcicfg_write32(&p->phb, 0, PCI_CFG_PRIMARY_BUS, 0x00ff0100);
/* Init_47..52
*
* IO and Memory base & limits are set to base > limit, which
* allows all inbounds.
*
* XXX This has the potential of confusing the OS which might
* think that nothing is forwarded downstream. We probably need
* to fix this to match the IO and M32 PHB windows
*/
phb3_pcicfg_write16(&p->phb, 0, PCI_CFG_IO_BASE, 0x0010);
phb3_pcicfg_write32(&p->phb, 0, PCI_CFG_MEM_BASE, 0x00000010);
phb3_pcicfg_write32(&p->phb, 0, PCI_CFG_PREF_MEM_BASE, 0x00000010);
/* Init_53..54 - Setup bridge control enable forwarding of CORR, FATAL,
* and NONFATAL errors
*/
phb3_pcicfg_write16(&p->phb, 0, PCI_CFG_BRCTL, PCI_CFG_BRCTL_SERR_EN);
/* Init_55..56
*
* PCIE Device control/status, enable error reporting, disable relaxed
* ordering, set MPS to 128 (see note), clear errors.
*
* Note: The doc recommends to set MPS to 4K. This has proved to have
* some issues as it requires specific claming of MRSS on devices and
* we've found devices in the field that misbehave when doing that.
*
* We currently leave it all to 128 bytes (minimum setting) at init
* time. The generic PCIe probing later on might apply a different
* value, or the kernel will, but we play it safe at early init
*/
if (p->ecap <= 0) {
ecap = pci_find_cap(&p->phb, 0, PCI_CFG_CAP_ID_EXP);
if (ecap < 0) {
PHBERR(p, "Can't locate PCI-E capability\n");
return false;
}
p->ecap = ecap;
} else {
ecap = p->ecap;
}
phb3_pcicfg_write16(&p->phb, 0, ecap + PCICAP_EXP_DEVSTAT,
PCICAP_EXP_DEVSTAT_CE |
PCICAP_EXP_DEVSTAT_NFE |
PCICAP_EXP_DEVSTAT_FE |
PCICAP_EXP_DEVSTAT_UE);
phb3_pcicfg_write16(&p->phb, 0, ecap + PCICAP_EXP_DEVCTL,
PCICAP_EXP_DEVCTL_CE_REPORT |
PCICAP_EXP_DEVCTL_NFE_REPORT |
PCICAP_EXP_DEVCTL_FE_REPORT |
PCICAP_EXP_DEVCTL_UR_REPORT |
SETFIELD(PCICAP_EXP_DEVCTL_MPS, 0, PCIE_MPS_128B));
/* Init_57..58
*
* Root Control Register. Enable error reporting
*
* Note: Added CRS visibility.
*/
phb3_pcicfg_write16(&p->phb, 0, ecap + PCICAP_EXP_RC,
PCICAP_EXP_RC_SYSERR_ON_CE |
PCICAP_EXP_RC_SYSERR_ON_NFE |
PCICAP_EXP_RC_SYSERR_ON_FE |
PCICAP_EXP_RC_CRS_VISIBLE);
/* Init_59..60
*
* Device Control 2. Enable ARI fwd, set timer to RTOS timer
*/
phb3_pcicfg_write16(&p->phb, 0, ecap + PCICAP_EXP_DCTL2,
SETFIELD(PCICAP_EXP_DCTL2_CMPTOUT, 0, 0xf) |
PCICAP_EXP_DCTL2_ARI_FWD);
/* Init_61..76
*
* AER inits
*/
if (p->aercap <= 0) {
aercap = pci_find_ecap(&p->phb, 0, PCIECAP_ID_AER, NULL);
if (aercap < 0) {
PHBERR(p, "Can't locate AER capability\n");
return false;
}
p->aercap = aercap;
} else {
aercap = p->aercap;
}
/* Clear all UE status */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_UE_STATUS,
0xffffffff);
/* Disable some error reporting as per the PHB3 spec */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_UE_MASK,
PCIECAP_AER_UE_POISON_TLP |
PCIECAP_AER_UE_COMPL_TIMEOUT |
PCIECAP_AER_UE_COMPL_ABORT |
PCIECAP_AER_UE_ECRC);
/* Report some errors as fatal */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_UE_SEVERITY,
PCIECAP_AER_UE_DLP |
PCIECAP_AER_UE_SURPRISE_DOWN |
PCIECAP_AER_UE_FLOW_CTL_PROT |
PCIECAP_AER_UE_UNEXP_COMPL |
PCIECAP_AER_UE_RECV_OVFLOW |
PCIECAP_AER_UE_MALFORMED_TLP);
/* Clear all CE status */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_CE_STATUS,
0xffffffff);
/* Disable some error reporting as per the PHB3 spec */
/* Note: When link down, also disable rcvr errors */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_CE_MASK,
PCIECAP_AER_CE_ADV_NONFATAL |
(p->has_link ? 0 : PCIECAP_AER_CE_RECVR_ERR));
/* Enable or disable ECRC generation & checking */
phb3_enable_ecrc(&p->phb, !p->no_ecrc_devs);
/* Enable reporting in root error control */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_RERR_CMD,
PCIECAP_AER_RERR_CMD_FE |
PCIECAP_AER_RERR_CMD_NFE |
PCIECAP_AER_RERR_CMD_CE);
/* Clear root error status */
phb3_pcicfg_write32(&p->phb, 0, aercap + PCIECAP_AER_RERR_STA,
0xffffffff);
return true;
}
static void phb3_init_utl(struct phb3 *p)
{
/* Init_77..79: Clear spurrious errors and assign errors to the
* right "interrupt" signal
*/
out_be64(p->regs + UTL_SYS_BUS_AGENT_STATUS, 0xffffffffffffffffUL);
out_be64(p->regs + UTL_SYS_BUS_AGENT_ERR_SEVERITY, 0x5000000000000000UL);
out_be64(p->regs + UTL_SYS_BUS_AGENT_IRQ_EN, 0xfcc0000000000000UL);
/* Init_80..81: Setup tag allocations
*
* Stick to HW defaults. May differs between PHB implementations
*/
/* Init_82: PCI Express port control
* SW283991: Set Outbound Non-Posted request timeout to 16ms (RTOS).
*/
out_be64(p->regs + UTL_PCIE_PORT_CONTROL, 0x8588007000000000UL);
/* Init_83..85: Clean & setup port errors */
out_be64(p->regs + UTL_PCIE_PORT_STATUS, 0xffdfffffffffffffUL);
out_be64(p->regs + UTL_PCIE_PORT_ERROR_SEV, 0x5039000000000000UL);
if (p->has_link)
out_be64(p->regs + UTL_PCIE_PORT_IRQ_EN, 0xad52800000000000UL);
else
out_be64(p->regs + UTL_PCIE_PORT_IRQ_EN, 0xad42800000000000UL);
/* Init_86 : Cleanup RC errors */
out_be64(p->regs + UTL_RC_STATUS, 0xffffffffffffffffUL);
}
static void phb3_init_errors(struct phb3 *p)
{
/* Init_88: LEM Error Mask : Temporarily disable error interrupts */
out_be64(p->regs + PHB_LEM_ERROR_MASK, 0xffffffffffffffffUL);
/* Init_89..97: Disable all error interrupts until end of init */
out_be64(p->regs + PHB_ERR_STATUS, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_ERR1_STATUS, 0x0000000000000000UL);
out_be64(p->regs + PHB_ERR_LEM_ENABLE, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_ERR_FREEZE_ENABLE, 0x0000000080800000UL);
out_be64(p->regs + PHB_ERR_AIB_FENCE_ENABLE, 0xffffffdd0c00ffc0UL);
out_be64(p->regs + PHB_ERR_LOG_0, 0x0000000000000000UL);
out_be64(p->regs + PHB_ERR_LOG_1, 0x0000000000000000UL);
out_be64(p->regs + PHB_ERR_STATUS_MASK, 0x0000000000000000UL);
out_be64(p->regs + PHB_ERR1_STATUS_MASK, 0x0000000000000000UL);
/* Init_98_106: Configure MMIO error traps & clear old state
*
* Don't enable BAR multi-hit detection in bit 41.
*/
out_be64(p->regs + PHB_OUT_ERR_STATUS, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_OUT_ERR1_STATUS, 0x0000000000000000UL);
out_be64(p->regs + PHB_OUT_ERR_LEM_ENABLE, 0xfdffffffffbfffffUL);
out_be64(p->regs + PHB_OUT_ERR_FREEZE_ENABLE, 0x0000420800000000UL);
out_be64(p->regs + PHB_OUT_ERR_AIB_FENCE_ENABLE, 0x9cf3bc00f89c700fUL);
out_be64(p->regs + PHB_OUT_ERR_LOG_0, 0x0000000000000000UL);
out_be64(p->regs + PHB_OUT_ERR_LOG_1, 0x0000000000000000UL);
out_be64(p->regs + PHB_OUT_ERR_STATUS_MASK, 0x0000000000400000UL);
out_be64(p->regs + PHB_OUT_ERR1_STATUS_MASK, 0x0000000000400000UL);
/* Init_107_115: Configure DMA_A error traps & clear old state */
out_be64(p->regs + PHB_INA_ERR_STATUS, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_INA_ERR1_STATUS, 0x0000000000000000UL);
out_be64(p->regs + PHB_INA_ERR_LEM_ENABLE, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_INA_ERR_FREEZE_ENABLE, 0xc00003a901006000UL);
out_be64(p->regs + PHB_INA_ERR_AIB_FENCE_ENABLE, 0x3fff5452fe019fdeUL);
out_be64(p->regs + PHB_INA_ERR_LOG_0, 0x0000000000000000UL);
out_be64(p->regs + PHB_INA_ERR_LOG_1, 0x0000000000000000UL);
out_be64(p->regs + PHB_INA_ERR_STATUS_MASK, 0x0000000000000000UL);
out_be64(p->regs + PHB_INA_ERR1_STATUS_MASK, 0x0000000000000000UL);
/* Init_116_124: Configure DMA_B error traps & clear old state */
out_be64(p->regs + PHB_INB_ERR_STATUS, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_INB_ERR1_STATUS, 0x0000000000000000UL);
out_be64(p->regs + PHB_INB_ERR_LEM_ENABLE, 0xffffffffffffffffUL);
/*
* Workaround for errata HW257476, turn correctable messages into
* ER freezes on Murano and Venice DD1.0
*/
if (p->rev < PHB3_REV_MURANO_DD20)
out_be64(p->regs + PHB_INB_ERR_FREEZE_ENABLE,
0x0000600000000070UL);
else
out_be64(p->regs + PHB_INB_ERR_FREEZE_ENABLE,
0x0000600000000060UL);
out_be64(p->regs + PHB_INB_ERR_AIB_FENCE_ENABLE, 0xfcff80fbff7ff08cUL);
out_be64(p->regs + PHB_INB_ERR_LOG_0, 0x0000000000000000UL);
out_be64(p->regs + PHB_INB_ERR_LOG_1, 0x0000000000000000UL);
out_be64(p->regs + PHB_INB_ERR_STATUS_MASK, 0x0000000000000000UL);
out_be64(p->regs + PHB_INB_ERR1_STATUS_MASK, 0x0000000000000000UL);
/* Init_125..128: Cleanup & configure LEM */
out_be64(p->regs + PHB_LEM_FIR_ACCUM, 0x0000000000000000UL);
out_be64(p->regs + PHB_LEM_ACTION0, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_LEM_ACTION1, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_LEM_WOF, 0x0000000000000000UL);
}
static int64_t phb3_fixup_pec_inits(struct phb3 *p)
{
int64_t rc;
uint64_t val;
/* These fixups handle some timer updates that HB doesn't yet do
* to work around problems with some adapters or external drawers
* (SW283991)
*/
/* PCI Hardware Configuration 0 Register */
rc = xscom_read(p->chip_id, p->pe_xscom + 0x18, &val);
if (rc) {
PHBERR(p, "Can't read CS0 !\n");
return rc;
}
val = val & 0x0f0fffffffffffffull;
val = val | 0x1010000000000000ull;
rc = xscom_write(p->chip_id, p->pe_xscom + 0x18, val);
if (rc) {
PHBERR(p, "Can't write CS0 !\n");
return rc;
}
return 0;
}
static void phb3_init_hw(struct phb3 *p, bool first_init)
{
uint64_t val;
PHBDBG(p, "Initializing PHB...\n");
/* Fixups for PEC inits */
if (phb3_fixup_pec_inits(p)) {
PHBERR(p, "Failed to init PEC, PHB appears broken\n");
goto failed;
}
/* Lift reset */
xscom_read(p->chip_id, p->spci_xscom + 1, &val);/* HW275117 */
xscom_write(p->chip_id, p->pci_xscom + 0xa, 0);
/* XXX FIXME, turn that into a state machine or a worker thread */
time_wait_ms(100);
/* Grab version and fit it in an int */
val = phb3_read_reg_asb(p, PHB_VERSION);
if (val == 0 || val == 0xffffffffffffffffUL) {
PHBERR(p, "Failed to read version, PHB appears broken\n");
goto failed;
}
p->rev = ((val >> 16) & 0x00ff0000) | (val & 0xffff);
PHBDBG(p, "Core revision 0x%x\n", p->rev);
/* Setup AIB credits etc... */
phb3_setup_aib(p);
/* Init_8 - PCIE System Configuration Register
*
* Use default values, clear bit 15 (SYS_EC00_SLOT) to avoid incorrect
* slot power limit message and adjust max speed based on system
* config. Don't hard wire default value as some bits are different
* between implementations.
*/
val = in_be64(p->regs + PHB_PCIE_SYSTEM_CONFIG);
PHBDBG(p, "Default system config: 0x%016llx\n", val);
val = SETFIELD(PHB_PCIE_SCONF_SLOT, val, 0);
val = SETFIELD(PHB_PCIE_SCONF_MAXLINKSPEED, val, p->max_link_speed);
out_be64(p->regs + PHB_PCIE_SYSTEM_CONFIG, val);
PHBDBG(p, "New system config : 0x%016llx\n",
in_be64(p->regs + PHB_PCIE_SYSTEM_CONFIG));
/* Init_9..12 - PCIE DLP Lane EQ control */
if (p->lane_eq) {
out_be64(p->regs + PHB_PCIE_LANE_EQ_CNTL0,
be64_to_cpu(p->lane_eq[0]));
out_be64(p->regs + PHB_PCIE_LANE_EQ_CNTL1,
be64_to_cpu(p->lane_eq[1]));
out_be64(p->regs + PHB_PCIE_LANE_EQ_CNTL2,
be64_to_cpu(p->lane_eq[2]));
out_be64(p->regs + PHB_PCIE_LANE_EQ_CNTL3,
be64_to_cpu(p->lane_eq[3]));
}
/* Init_XX - (PHB2 errata)
*
* Set proper credits, needs adjustment due to wrong defaults
* on PHB2 before we lift the reset. This only applies to Murano
* and Venice
*/
if (p->index == 2 && p->rev < PHB3_REV_NAPLES_DD10)
out_be64(p->regs + PHB_PCIE_SYS_LINK_INIT, 0x9008133332120000UL);
/* Init_13 - PCIE Reset */
/*
* Lift the PHB resets but not PERST, this will be lifted
* later by the initial PERST state machine
*/
PHBDBG(p, "PHB_RESET is 0x%016llx\n", in_be64(p->regs + PHB_RESET));
out_be64(p->regs + PHB_RESET, 0xd000000000000000UL);
/* Architected IODA2 inits */
phb3_init_ioda2(p);
/* Init_37..42 - Clear UTL & DLP error logs */
out_be64(p->regs + PHB_PCIE_UTL_ERRLOG1, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_PCIE_UTL_ERRLOG2, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_PCIE_UTL_ERRLOG3, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_PCIE_UTL_ERRLOG4, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_PCIE_DLP_ERRLOG1, 0xffffffffffffffffUL);
out_be64(p->regs + PHB_PCIE_DLP_ERRLOG2, 0xffffffffffffffffUL);
/* Init_43 - Wait for UTL core to come out of reset */
if (!phb3_wait_dlp_reset(p))
goto failed;
/* Init_44 - Clear port status */
out_be64(p->regs + UTL_PCIE_PORT_STATUS, 0xffffffffffffffffUL);
/* Init_45..76: Init root complex config space */
if (!phb3_init_rc_cfg(p))
goto failed;
/* Init_77..86 : Init UTL */
phb3_init_utl(p);
/*
* Init_87: PHB Control register. Various PHB settings
* Enable IVC for Murano DD2.0 or later one
*/
#ifdef IVT_TABLE_IVE_16B
val = 0xf3a80e4b00000000UL;
#else
val = 0xf3a80ecb00000000UL;
#endif
if (p->rev >= PHB3_REV_MURANO_DD20)
val |= 0x0000010000000000UL;
if (first_init && p->rev >= PHB3_REV_NAPLES_DD10) {
/* Enable 32-bit bypass support on Naples and tell the OS
* about it
*/
val |= 0x0010000000000000UL;
dt_add_property(p->phb.dt_node,
"ibm,32-bit-bypass-supported", NULL, 0);
}
out_be64(p->regs + PHB_CONTROL, val);
/* Init_88..128 : Setup error registers */
phb3_init_errors(p);
/* Init_129: Read error summary */
val = in_be64(p->regs + PHB_ETU_ERR_SUMMARY);
if (val) {
PHBERR(p, "Errors detected during PHB init: 0x%16llx\n", val);
goto failed;
}
/* NOTE: At this point the spec waits for the link to come up. We
* don't bother as we are doing a PERST soon.
*/
/* XXX I don't know why the spec does this now and not earlier, so
* to be sure to get it right we might want to move it to the freset
* state machine, though the generic PCI layer will probably do
* this anyway (ie, enable MEM, etc... in the RC)
*
* Note:The spec enables IO but PHB3 doesn't do IO space .... so we
* leave that clear.
*/
phb3_pcicfg_write16(&p->phb, 0, PCI_CFG_CMD,
PCI_CFG_CMD_MEM_EN |
PCI_CFG_CMD_BUS_MASTER_EN |
PCI_CFG_CMD_PERR_RESP |
PCI_CFG_CMD_SERR_EN);
/* Clear errors */
phb3_pcicfg_write16(&p->phb, 0, PCI_CFG_STAT,
PCI_CFG_STAT_SENT_TABORT |
PCI_CFG_STAT_RECV_TABORT |
PCI_CFG_STAT_RECV_MABORT |
PCI_CFG_STAT_SENT_SERR |
PCI_CFG_STAT_RECV_PERR);
/* Init_136 - Re-enable error interrupts */
/* TBD: Should we mask any of these for PERST ? */
out_be64(p->regs + PHB_ERR_IRQ_ENABLE, 0x0000002280b80000UL);
out_be64(p->regs + PHB_OUT_ERR_IRQ_ENABLE, 0x600c42fc042080f0UL);
out_be64(p->regs + PHB_INA_ERR_IRQ_ENABLE, 0xc000a3a901826020UL);
out_be64(p->regs + PHB_INB_ERR_IRQ_ENABLE, 0x0000600000800070UL);
out_be64(p->regs + PHB_LEM_ERROR_MASK, 0x42498e367f502eaeUL);
/*
* Init_141 - Enable DMA address speculation
*
* Errata#20131017: Disable speculation until Murano DD2.0
*
* Note: We keep IVT speculation disabled (bit 4). It should work with
* Murano DD2.0 and later but lacks sufficient testing. We will re-enable
* it once that has been done.
*/
if (p->rev >= PHB3_REV_MURANO_DD20)
out_be64(p->regs + PHB_TCE_SPEC_CTL, 0xf000000000000000UL);
else
out_be64(p->regs + PHB_TCE_SPEC_CTL, 0x0ul);
/* Errata#20131017: avoid TCE queue overflow */
if (p->rev == PHB3_REV_MURANO_DD20)
phb3_write_reg_asb(p, PHB_TCE_WATERMARK, 0x0003000000030302UL);
/* Init_142 - PHB3 - Timeout Control Register 1
* SW283991: Increase timeouts
*/
out_be64(p->regs + PHB_TIMEOUT_CTRL1, 0x1715152016200000UL);
/* Init_143 - PHB3 - Timeout Control Register 2 */
out_be64(p->regs + PHB_TIMEOUT_CTRL2, 0x2320d71600000000UL);
/* Mark the PHB as functional which enables all the various sequences */
p->broken = false;
PHBDBG(p, "Initialization complete\n");
return;
failed:
PHBERR(p, "Initialization failed\n");
p->broken = true;
}
static void phb3_allocate_tables(struct phb3 *p)
{
uint16_t *rte;
uint32_t i;
/* XXX Our current memalign implementation sucks,
*
* It will do the job, however it doesn't support freeing
* the memory and wastes space by always allocating twice
* as much as requested (size + alignment)
*/
p->tbl_rtt = (uint64_t)local_alloc(p->chip_id, RTT_TABLE_SIZE, RTT_TABLE_SIZE);
assert(p->tbl_rtt);
rte = (uint16_t *)(p->tbl_rtt);
for (i = 0; i < RTT_TABLE_ENTRIES; i++, rte++)
*rte = PHB3_RESERVED_PE_NUM;
p->tbl_peltv = (uint64_t)local_alloc(p->chip_id, PELTV_TABLE_SIZE, PELTV_TABLE_SIZE);
assert(p->tbl_peltv);
memset((void *)p->tbl_peltv, 0, PELTV_TABLE_SIZE);
p->tbl_pest = (uint64_t)local_alloc(p->chip_id, PEST_TABLE_SIZE, PEST_TABLE_SIZE);
assert(p->tbl_pest);
memset((void *)p->tbl_pest, 0, PEST_TABLE_SIZE);
p->tbl_ivt = (uint64_t)local_alloc(p->chip_id, IVT_TABLE_SIZE, IVT_TABLE_SIZE);
assert(p->tbl_ivt);
memset((void *)p->tbl_ivt, 0, IVT_TABLE_SIZE);
p->tbl_rba = (uint64_t)local_alloc(p->chip_id, RBA_TABLE_SIZE, RBA_TABLE_SIZE);
assert(p->tbl_rba);
memset((void *)p->tbl_rba, 0, RBA_TABLE_SIZE);
}
static void phb3_add_properties(struct phb3 *p)
{
struct dt_node *np = p->phb.dt_node;
uint32_t lsibase, icsp = get_ics_phandle();
uint64_t m32b, m64b, m64s, reg, tkill;
reg = cleanup_addr((uint64_t)p->regs);
/* Add various properties that HB doesn't have to
* add, some of them simply because they result from
* policy decisions made in skiboot rather than in HB
* such as the MMIO windows going to PCI, interrupts,
* etc...
*/
dt_add_property_cells(np, "#address-cells", 3);
dt_add_property_cells(np, "#size-cells", 2);
dt_add_property_cells(np, "#interrupt-cells", 1);
dt_add_property_cells(np, "bus-range", 0, 0xff);
dt_add_property_cells(np, "clock-frequency", 0x200, 0); /* ??? */
dt_add_property_cells(np, "interrupt-parent", icsp);
/* XXX FIXME: add slot-name */
//dt_property_cell("bus-width", 8); /* Figure it out from VPD ? */
/* "ranges", we only expose M32 (PHB3 doesn't do IO)
*
* Note: The kernel expects us to have chopped of 64k from the
* M32 size (for the 32-bit MSIs). If we don't do that, it will
* get confused (OPAL does it)
*/
m32b = cleanup_addr(p->mm1_base);
m64b = cleanup_addr(p->mm0_base);
m64s = p->mm0_size;
dt_add_property_cells(np, "ranges",
/* M32 space */
0x02000000, 0x00000000, M32_PCI_START,
hi32(m32b), lo32(m32b), 0, M32_PCI_SIZE - 0x10000);
/* XXX FIXME: add opal-memwin32, dmawins, etc... */
dt_add_property_u64s(np, "ibm,opal-m64-window", m64b, m64b, m64s);
dt_add_property(np, "ibm,opal-single-pe", NULL, 0);
//dt_add_property_cells(np, "ibm,opal-msi-ports", 2048);
dt_add_property_cells(np, "ibm,opal-num-pes", 256);
dt_add_property_cells(np, "ibm,opal-reserved-pe",
PHB3_RESERVED_PE_NUM);
dt_add_property_cells(np, "ibm,opal-msi-ranges",
p->base_msi, PHB3_MSI_IRQ_COUNT);
tkill = reg + PHB_TCE_KILL;
dt_add_property_cells(np, "ibm,opal-tce-kill",
hi32(tkill), lo32(tkill));
dt_add_property_cells(np, "ibm,supported-tce-sizes",
12, // 4K
16, // 64K
24, // 16M
28); // 256M
/*
* Indicate to Linux that the architected IODA2 MSI EOI method
* is supported
*/
dt_add_property_string(np, "ibm,msi-eoi-method", "ioda2");
/* Indicate to Linux that CAPP timebase sync is supported */
dt_add_property_string(np, "ibm,capp-timebase-sync", NULL);
/* The interrupt maps will be generated in the RC node by the
* PCI code based on the content of this structure:
*/
lsibase = p->base_lsi;
p->phb.lstate.int_size = 2;
p->phb.lstate.int_val[0][0] = lsibase + PHB3_LSI_PCIE_INTA;
p->phb.lstate.int_val[0][1] = 1;
p->phb.lstate.int_val[1][0] = lsibase + PHB3_LSI_PCIE_INTB;
p->phb.lstate.int_val[1][1] = 1;
p->phb.lstate.int_val[2][0] = lsibase + PHB3_LSI_PCIE_INTC;
p->phb.lstate.int_val[2][1] = 1;
p->phb.lstate.int_val[3][0] = lsibase + PHB3_LSI_PCIE_INTD;
p->phb.lstate.int_val[3][1] = 1;
p->phb.lstate.int_parent[0] = icsp;
p->phb.lstate.int_parent[1] = icsp;
p->phb.lstate.int_parent[2] = icsp;
p->phb.lstate.int_parent[3] = icsp;
/* Indicators for variable tables */
dt_add_property_cells(np, "ibm,opal-rtt-table",
hi32(p->tbl_rtt), lo32(p->tbl_rtt), RTT_TABLE_SIZE);
dt_add_property_cells(np, "ibm,opal-peltv-table",
hi32(p->tbl_peltv), lo32(p->tbl_peltv), PELTV_TABLE_SIZE);
dt_add_property_cells(np, "ibm,opal-pest-table",
hi32(p->tbl_pest), lo32(p->tbl_pest), PEST_TABLE_SIZE);
dt_add_property_cells(np, "ibm,opal-ivt-table",
hi32(p->tbl_ivt), lo32(p->tbl_ivt), IVT_TABLE_SIZE);
dt_add_property_cells(np, "ibm,opal-ive-stride",
IVT_TABLE_STRIDE);
dt_add_property_cells(np, "ibm,opal-rba-table",
hi32(p->tbl_rba), lo32(p->tbl_rba), RBA_TABLE_SIZE);
dt_add_property_cells(np, "ibm,phb-diag-data-size",
sizeof(struct OpalIoPhb3ErrorData));
}
static bool phb3_calculate_windows(struct phb3 *p)
{
const struct dt_property *prop;
/* Get PBCQ MMIO windows from device-tree */
prop = dt_require_property(p->phb.dt_node,
"ibm,mmio-window", -1);
assert(prop->len >= (2 * sizeof(uint64_t)));
p->mm0_base = ((const uint64_t *)prop->prop)[0];
p->mm0_size = ((const uint64_t *)prop->prop)[1];
if (prop->len > 16) {
p->mm1_base = ((const uint64_t *)prop->prop)[2];
p->mm1_size = ((const uint64_t *)prop->prop)[3];
}
/* Sort them so that 0 is big and 1 is small */
if (p->mm1_size && p->mm1_size > p->mm0_size) {
uint64_t b = p->mm0_base;
uint64_t s = p->mm0_size;
p->mm0_base = p->mm1_base;
p->mm0_size = p->mm1_size;
p->mm1_base = b;
p->mm1_size = s;
}
/* If 1 is too small, ditch it */
if (p->mm1_size < M32_PCI_SIZE)
p->mm1_size = 0;
/* If 1 doesn't exist, carve it out of 0 */
if (p->mm1_size == 0) {
p->mm0_size /= 2;
p->mm1_base = p->mm0_base + p->mm0_size;
p->mm1_size = p->mm0_size;
}
/* Crop mm1 to our desired size */
if (p->mm1_size > M32_PCI_SIZE)
p->mm1_size = M32_PCI_SIZE;
return true;
}
/*
* Trigger a creset to disable CAPI mode on kernel shutdown.
*
* This helper is called repeatedly by the host sync notifier mechanism, which
* relies on the kernel to regularly poll the OPAL_SYNC_HOST_REBOOT call as it
* shuts down.
*
* This is a somewhat hacky abuse of the host sync notifier mechanism, but the
* alternatives require a new API call which won't work for older kernels.
*/
static bool phb3_host_sync_reset(void *data)
{
struct phb3 *p = (struct phb3 *)data;
struct pci_slot *slot = p->phb.slot;
struct proc_chip *chip = get_chip(p->chip_id);
int64_t rc;
switch (slot->state) {
case PHB3_SLOT_NORMAL:
lock(&capi_lock);
rc = (chip->capp_phb3_attached_mask & (1 << p->index)) ?
OPAL_PHB_CAPI_MODE_CAPI :
OPAL_PHB_CAPI_MODE_PCIE;
unlock(&capi_lock);
if (rc == OPAL_PHB_CAPI_MODE_PCIE)
return true;
PHBINF(p, "PHB in CAPI mode, resetting\n");
p->flags &= ~PHB3_CAPP_RECOVERY;
phb3_creset(slot);
return false;
default:
rc = slot->ops.run_sm(slot);
return rc <= OPAL_SUCCESS;
}
}
static void phb3_create(struct dt_node *np)
{
const struct dt_property *prop;
struct phb3 *p = zalloc(sizeof(struct phb3));
struct pci_slot *slot;
size_t lane_eq_len;
struct dt_node *iplp;
struct proc_chip *chip;
int opal_id;
char *path;
assert(p);
/* Populate base stuff */
p->index = dt_prop_get_u32(np, "ibm,phb-index");
p->chip_id = dt_prop_get_u32(np, "ibm,chip-id");
p->regs = (void *)dt_get_address(np, 0, NULL);
p->base_msi = PHB3_MSI_IRQ_BASE(p->chip_id, p->index);
p->base_lsi = PHB3_LSI_IRQ_BASE(p->chip_id, p->index);
p->phb.dt_node = np;
p->phb.ops = &phb3_ops;
p->phb.phb_type = phb_type_pcie_v3;
p->phb.scan_map = 0x1; /* Only device 0 to scan */
if (!phb3_calculate_windows(p))
return;
/* Get the various XSCOM register bases from the device-tree */
prop = dt_require_property(np, "ibm,xscom-bases", 3 * sizeof(uint32_t));
p->pe_xscom = ((const uint32_t *)prop->prop)[0];
p->spci_xscom = ((const uint32_t *)prop->prop)[1];
p->pci_xscom = ((const uint32_t *)prop->prop)[2];
/*
* We skip the initial PERST assertion requested by the generic code
* when doing a cold boot because we are coming out of cold boot already
* so we save boot time that way. The PERST state machine will still
* handle waiting for the link to come up, it will just avoid actually
* asserting & deasserting the PERST output
*
* For a hot IPL, we still do a PERST
*
* Note: In absence of property (ie, FSP-less), we stick to the old
* behaviour and set skip_perst to true
*/
p->skip_perst = true; /* Default */
iplp = dt_find_by_path(dt_root, "ipl-params/ipl-params");
if (iplp) {
const char *ipl_type = dt_prop_get_def(iplp, "cec-major-type", NULL);
if (ipl_type && (!strcmp(ipl_type, "hot")))
p->skip_perst = false;
}
/* By default link is assumed down */
p->has_link = false;
/* We register the PHB before we initialize it so we
* get a useful OPAL ID for it. We use a different numbering here
* between Naples and Venice/Murano in order to leave room for the
* NPU on Naples.
*/
chip = next_chip(NULL); /* Just need any chip */
if (chip && chip->type == PROC_CHIP_P8_NAPLES)
opal_id = p->chip_id * 8 + p->index;
else
opal_id = p->chip_id * 4 + p->index;
pci_register_phb(&p->phb, opal_id);
slot = phb3_slot_create(&p->phb);
if (!slot)
PHBERR(p, "Cannot create PHB slot\n");
/* Hello ! */
path = dt_get_path(np);
PHBINF(p, "Found %s @[%d:%d]\n", path, p->chip_id, p->index);
PHBINF(p, " M32 [0x%016llx..0x%016llx]\n",
p->mm1_base, p->mm1_base + p->mm1_size - 1);
PHBINF(p, " M64 [0x%016llx..0x%016llx]\n",
p->mm0_base, p->mm0_base + p->mm0_size - 1);
free(path);
/* Find base location code from root node */
p->phb.base_loc_code = dt_prop_get_def(dt_root,
"ibm,io-base-loc-code", NULL);
if (!p->phb.base_loc_code)
PHBDBG(p, "Base location code not found !\n");
/* Priority order: NVRAM -> dt -> GEN3 */
p->max_link_speed = 3;
if (dt_has_node_property(np, "ibm,max-link-speed", NULL))
p->max_link_speed = dt_prop_get_u32(np, "ibm,max-link-speed");
if (pcie_max_link_speed)
p->max_link_speed = pcie_max_link_speed;
if (p->max_link_speed > 3) /* clamp to 3 */
p->max_link_speed = 3;
PHBINF(p, "Max link speed: GEN%i\n", p->max_link_speed);
/* Check for lane equalization values from HB or HDAT */
p->lane_eq = dt_prop_get_def_size(np, "ibm,lane-eq", NULL, &lane_eq_len);
if (p->lane_eq && lane_eq_len != (8 * 4)) {
PHBERR(p, "Device-tree has ibm,lane-eq with wrong len %ld\n",
lane_eq_len);
p->lane_eq = NULL;
}
if (p->lane_eq) {
PHBDBG(p, "Override lane equalization settings:\n");
PHBDBG(p, " 0x%016llx 0x%016llx\n",
be64_to_cpu(p->lane_eq[0]), be64_to_cpu(p->lane_eq[1]));
PHBDBG(p, " 0x%016llx 0x%016llx\n",
be64_to_cpu(p->lane_eq[2]), be64_to_cpu(p->lane_eq[3]));
}
/*
* Grab CEC IO VPD load info from the root of the device-tree,
* on P8 there's a single such VPD for the whole machine
*/
prop = dt_find_property(dt_root, "ibm,io-vpd");
if (!prop) {
/* LX VPD Lid not already loaded */
if (platform.vpd_iohub_load)
platform.vpd_iohub_load(dt_root);
}
/* Allocate the SkiBoot internal in-memory tables for the PHB */
phb3_allocate_tables(p);
phb3_add_properties(p);
/* Clear IODA2 cache */
phb3_init_ioda_cache(p);
/* Register interrupt sources */
register_irq_source(&phb3_msi_irq_ops, p, p->base_msi,
PHB3_MSI_IRQ_COUNT);
register_irq_source(&phb3_lsi_irq_ops, p, p->base_lsi, 8);
/* Get the HW up and running */
phb3_init_hw(p, true);
/* Load capp microcode into capp unit */
load_capp_ucode(p);
opal_add_host_sync_notifier(phb3_host_sync_reset, p);
/* Platform additional setup */
if (platform.pci_setup_phb)
platform.pci_setup_phb(&p->phb, p->index);
}
static void phb3_probe_pbcq(struct dt_node *pbcq)
{
uint32_t spci_xscom, pci_xscom, pe_xscom, gcid, pno;
uint64_t val, phb_bar, bar_en;
uint64_t mmio0_bar, mmio0_bmask, mmio0_sz;
uint64_t mmio1_bar, mmio1_bmask, mmio1_sz;
uint64_t reg[2];
uint64_t mmio_win[4];
unsigned int mmio_win_sz;
struct dt_node *np;
char *path;
uint64_t capp_ucode_base;
unsigned int max_link_speed;
gcid = dt_get_chip_id(pbcq);
pno = dt_prop_get_u32(pbcq, "ibm,phb-index");
path = dt_get_path(pbcq);
prlog(PR_NOTICE, "Chip %d Found PBCQ%d at %s\n", gcid, pno, path);
free(path);
pe_xscom = dt_get_address(pbcq, 0, NULL);
pci_xscom = dt_get_address(pbcq, 1, NULL);
spci_xscom = dt_get_address(pbcq, 2, NULL);
prlog(PR_DEBUG, "PHB3[%x:%x]: X[PE]=0x%08x X[PCI]=0x%08x"
" X[SPCI]=0x%08x\n",
gcid, pno, pe_xscom, pci_xscom, spci_xscom);
/* Check if CAPP mode */
if (xscom_read(gcid, spci_xscom + 0x03, &val)) {
prerror("PHB3[%x:%x]: Cannot read AIB CAPP ENABLE\n",
gcid, pno);
return;
}
if (val >> 63) {
prerror("PHB3[%x:%x]: Ignoring bridge in CAPP mode\n",
gcid, pno);
return;
}
/* Get PE BARs, assume only 0 and 2 are used for now */
xscom_read(gcid, pe_xscom + 0x42, &phb_bar);
phb_bar >>= 14;
prlog(PR_DEBUG, "PHB3[%x:%x] REGS = 0x%016llx [4k]\n",
gcid, pno, phb_bar);
if (phb_bar == 0) {
prerror("PHB3[%x:%x]: No PHB BAR set !\n", gcid, pno);
return;
}
/* Dbl check PHB BAR */
xscom_read(gcid, spci_xscom + 1, &val);/* HW275117 */
xscom_read(gcid, pci_xscom + 0x0b, &val);
val >>= 14;
prlog(PR_DEBUG, "PHB3[%x:%x] PCIBAR = 0x%016llx\n", gcid, pno, val);
if (phb_bar != val) {
prerror("PHB3[%x:%x] PCIBAR invalid, fixing up...\n",
gcid, pno);
xscom_read(gcid, spci_xscom + 1, &val);/* HW275117 */
xscom_write(gcid, pci_xscom + 0x0b, phb_bar << 14);
}
/* Check MMIO BARs */
xscom_read(gcid, pe_xscom + 0x40, &mmio0_bar);
xscom_read(gcid, pe_xscom + 0x43, &mmio0_bmask);
mmio0_bmask &= 0xffffffffc0000000ull;
mmio0_sz = ((~mmio0_bmask) >> 14) + 1;
mmio0_bar >>= 14;
prlog(PR_DEBUG, "PHB3[%x:%x] MMIO0 = 0x%016llx [0x%016llx]\n",
gcid, pno, mmio0_bar, mmio0_sz);
xscom_read(gcid, pe_xscom + 0x41, &mmio1_bar);
xscom_read(gcid, pe_xscom + 0x44, &mmio1_bmask);
mmio1_bmask &= 0xffffffffc0000000ull;
mmio1_sz = ((~mmio1_bmask) >> 14) + 1;
mmio1_bar >>= 14;
prlog(PR_DEBUG, "PHB3[%x:%x] MMIO1 = 0x%016llx [0x%016llx]\n",
gcid, pno, mmio1_bar, mmio1_sz);
/* Check BAR enable
*
* XXX BAR aren't always enabled by HB, we'll make assumptions
* that BARs are valid if they value is non-0
*/
xscom_read(gcid, pe_xscom + 0x45, &bar_en);
prlog(PR_DEBUG, "PHB3[%x:%x] BAREN = 0x%016llx\n",
gcid, pno, bar_en);
/* Always enable PHB BAR */
bar_en |= 0x2000000000000000ull;
/* Build MMIO windows list */
mmio_win_sz = 0;
if (mmio0_bar) {
mmio_win[mmio_win_sz++] = mmio0_bar;
mmio_win[mmio_win_sz++] = mmio0_sz;
bar_en |= 0x8000000000000000ul;
}
if (mmio1_bar) {
mmio_win[mmio_win_sz++] = mmio1_bar;
mmio_win[mmio_win_sz++] = mmio1_sz;
bar_en |= 0x4000000000000000ul;
}
/* No MMIO windows ? Barf ! */
if (mmio_win_sz == 0) {
prerror("PHB3[%x:%x]: No MMIO windows enabled !\n",
gcid, pno);
return;
}
/* Set the interrupt routing stuff, 8 relevant bits in mask
* (11 bits per PHB)
*/
val = p8_chip_irq_phb_base(gcid, pno);
val = (val << 45);
xscom_write(gcid, pe_xscom + 0x1a, val);
xscom_write(gcid, pe_xscom + 0x1b, 0xff00000000000000ul);
/* Configure LSI location to the top of the map */
xscom_write(gcid, pe_xscom + 0x1f, 0xff00000000000000ul);
/* Now add IRSN message bits to BAR enable and write it */
bar_en |= 0x1800000000000000ul;
xscom_write(gcid, pe_xscom + 0x45, bar_en);
prlog(PR_DEBUG, "PHB3[%x:%x] NEWBAREN = 0x%016llx\n",
gcid, pno, bar_en);
xscom_read(gcid, pe_xscom + 0x1a, &val);
prlog(PR_DEBUG, "PHB3[%x:%x] IRSNC = 0x%016llx\n",
gcid, pno, val);
xscom_read(gcid, pe_xscom + 0x1b, &val);
prlog(PR_DEBUG, "PHB3[%x:%x] IRSNM = 0x%016llx\n",
gcid, pno, val);
prlog(PR_DEBUG, "PHB3[%x:%x] LSI = 0x%016llx\n",
gcid, pno, val);
/* Create PHB node */
reg[0] = phb_bar;
reg[1] = 0x1000;
np = dt_new_addr(dt_root, "pciex", reg[0]);
if (!np)
return;
dt_add_property_strings(np, "compatible", "ibm,power8-pciex",
"ibm,ioda2-phb");
dt_add_property_strings(np, "device_type", "pciex");
dt_add_property(np, "reg", reg, sizeof(reg));
/* Everything else is handled later by skiboot, we just
* stick a few hints here
*/
dt_add_property_cells(np, "ibm,xscom-bases",
pe_xscom, spci_xscom, pci_xscom);
dt_add_property(np, "ibm,mmio-window", mmio_win, 8 * mmio_win_sz);
dt_add_property_cells(np, "ibm,phb-index", pno);
dt_add_property_cells(np, "ibm,pbcq", pbcq->phandle);
dt_add_property_cells(np, "ibm,chip-id", gcid);
if (dt_has_node_property(pbcq, "ibm,use-ab-detect", NULL))
dt_add_property(np, "ibm,use-ab-detect", NULL, 0);
if (dt_has_node_property(pbcq, "ibm,hub-id", NULL))
dt_add_property_cells(np, "ibm,hub-id",
dt_prop_get_u32(pbcq, "ibm,hub-id"));
if (dt_has_node_property(pbcq, "ibm,loc-code", NULL)) {
const char *lc = dt_prop_get(pbcq, "ibm,loc-code");
dt_add_property_string(np, "ibm,loc-code", lc);
}
if (dt_has_node_property(pbcq, "ibm,lane-eq", NULL)) {
size_t leq_size;
const void *leq = dt_prop_get_def_size(pbcq, "ibm,lane-eq",
NULL, &leq_size);
if (leq != NULL && leq_size == 4 * 8)
dt_add_property(np, "ibm,lane-eq", leq, leq_size);
}
if (dt_has_node_property(pbcq, "ibm,capp-ucode", NULL)) {
capp_ucode_base = dt_prop_get_u32(pbcq, "ibm,capp-ucode");
dt_add_property_cells(np, "ibm,capp-ucode", capp_ucode_base);
}
if (dt_has_node_property(pbcq, "ibm,max-link-speed", NULL)) {
max_link_speed = dt_prop_get_u32(pbcq, "ibm,max-link-speed");
dt_add_property_cells(np, "ibm,max-link-speed", max_link_speed);
}
dt_add_property_cells(np, "ibm,capi-flags",
OPAL_PHB_CAPI_FLAG_SNOOP_CONTROL);
add_chip_dev_associativity(np);
}
void probe_phb3(void)
{
struct dt_node *np;
/* Look for PBCQ XSCOM nodes */
dt_for_each_compatible(dt_root, np, "ibm,power8-pbcq")
phb3_probe_pbcq(np);
/* Look for newly created PHB nodes */
dt_for_each_compatible(dt_root, np, "ibm,power8-pciex")
phb3_create(np);
}
Reference in a new issue View git blame Copy permalink