761 lines
20 KiB
C
761 lines
20 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* FLASH support
|
|
*/
|
|
#include <common.h>
|
|
#include <command.h>
|
|
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
#include <dataflash.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
|
|
#include <jffs2/jffs2.h>
|
|
|
|
/* partition handling routines */
|
|
int mtdparts_init(void);
|
|
int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
|
|
int find_dev_and_part(const char *id, struct mtd_device **dev,
|
|
u8 *part_num, struct part_info **part);
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
extern flash_info_t flash_info[]; /* info for FLASH chips */
|
|
|
|
/*
|
|
* The user interface starts numbering for Flash banks with 1
|
|
* for historical reasons.
|
|
*/
|
|
|
|
/*
|
|
* this routine looks for an abbreviated flash range specification.
|
|
* the syntax is B:SF[-SL], where B is the bank number, SF is the first
|
|
* sector to erase, and SL is the last sector to erase (defaults to SF).
|
|
* bank numbers start at 1 to be consistent with other specs, sector numbers
|
|
* start at zero.
|
|
*
|
|
* returns: 1 - correct spec; *pinfo, *psf and *psl are
|
|
* set appropriately
|
|
* 0 - doesn't look like an abbreviated spec
|
|
* -1 - looks like an abbreviated spec, but got
|
|
* a parsing error, a number out of range,
|
|
* or an invalid flash bank.
|
|
*/
|
|
static int
|
|
abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
|
|
{
|
|
flash_info_t *fp;
|
|
int bank, first, last;
|
|
char *p, *ep;
|
|
|
|
if ((p = strchr (str, ':')) == NULL)
|
|
return 0;
|
|
*p++ = '\0';
|
|
|
|
bank = simple_strtoul (str, &ep, 10);
|
|
if (ep == str || *ep != '\0' ||
|
|
bank < 1 || bank > CONFIG_SYS_MAX_FLASH_BANKS ||
|
|
(fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN)
|
|
return -1;
|
|
|
|
str = p;
|
|
if ((p = strchr (str, '-')) != NULL)
|
|
*p++ = '\0';
|
|
|
|
first = simple_strtoul (str, &ep, 10);
|
|
if (ep == str || *ep != '\0' || first >= fp->sector_count)
|
|
return -1;
|
|
|
|
if (p != NULL) {
|
|
last = simple_strtoul (p, &ep, 10);
|
|
if (ep == p || *ep != '\0' ||
|
|
last < first || last >= fp->sector_count)
|
|
return -1;
|
|
} else {
|
|
last = first;
|
|
}
|
|
|
|
*pinfo = fp;
|
|
*psf = first;
|
|
*psl = last;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Take *addr in Flash and adjust it to fall on the end of its sector
|
|
*/
|
|
int flash_sect_roundb (ulong *addr)
|
|
{
|
|
flash_info_t *info;
|
|
ulong bank, sector_end_addr;
|
|
char found;
|
|
int i;
|
|
|
|
/* find the end addr of the sector where the *addr is */
|
|
found = 0;
|
|
for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS && !found; ++bank) {
|
|
info = &flash_info[bank];
|
|
for (i = 0; i < info->sector_count && !found; ++i) {
|
|
/* get the end address of the sector */
|
|
if (i == info->sector_count - 1) {
|
|
sector_end_addr = info->start[0] +
|
|
info->size - 1;
|
|
} else {
|
|
sector_end_addr = info->start[i+1] - 1;
|
|
}
|
|
|
|
if (*addr <= sector_end_addr &&
|
|
*addr >= info->start[i]) {
|
|
found = 1;
|
|
/* adjust *addr if necessary */
|
|
if (*addr < sector_end_addr)
|
|
*addr = sector_end_addr;
|
|
} /* sector */
|
|
} /* bank */
|
|
}
|
|
if (!found) {
|
|
/* error, addres not in flash */
|
|
printf("Error: end address (0x%08lx) not in flash!\n", *addr);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function computes the start and end addresses for both
|
|
* erase and protect commands. The range of the addresses on which
|
|
* either of the commands is to operate can be given in two forms:
|
|
* 1. <cmd> start end - operate on <'start', 'end')
|
|
* 2. <cmd> start +length - operate on <'start', start + length)
|
|
* If the second form is used and the end address doesn't fall on the
|
|
* sector boundary, than it will be adjusted to the next sector boundary.
|
|
* If it isn't in the flash, the function will fail (return -1).
|
|
* Input:
|
|
* arg1, arg2: address specification (i.e. both command arguments)
|
|
* Output:
|
|
* addr_first, addr_last: computed address range
|
|
* Return:
|
|
* 1: success
|
|
* -1: failure (bad format, bad address).
|
|
*/
|
|
static int
|
|
addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
|
|
{
|
|
char *ep;
|
|
char len_used; /* indicates if the "start +length" form used */
|
|
|
|
*addr_first = simple_strtoul(arg1, &ep, 16);
|
|
if (ep == arg1 || *ep != '\0')
|
|
return -1;
|
|
|
|
len_used = 0;
|
|
if (arg2 && *arg2 == '+'){
|
|
len_used = 1;
|
|
++arg2;
|
|
}
|
|
|
|
*addr_last = simple_strtoul(arg2, &ep, 16);
|
|
if (ep == arg2 || *ep != '\0')
|
|
return -1;
|
|
|
|
if (len_used){
|
|
/*
|
|
* *addr_last has the length, compute correct *addr_last
|
|
* XXX watch out for the integer overflow! Right now it is
|
|
* checked for in both the callers.
|
|
*/
|
|
*addr_last = *addr_first + *addr_last - 1;
|
|
|
|
/*
|
|
* It may happen that *addr_last doesn't fall on the sector
|
|
* boundary. We want to round such an address to the next
|
|
* sector boundary, so that the commands don't fail later on.
|
|
*/
|
|
|
|
if (flash_sect_roundb(addr_last) > 0)
|
|
return -1;
|
|
} /* "start +length" from used */
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
|
|
int *s_first, int *s_last,
|
|
int *s_count )
|
|
{
|
|
flash_info_t *info;
|
|
ulong bank;
|
|
int rcode = 0;
|
|
|
|
*s_count = 0;
|
|
|
|
for (bank=0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
|
|
s_first[bank] = -1; /* first sector to erase */
|
|
s_last [bank] = -1; /* last sector to erase */
|
|
}
|
|
|
|
for (bank=0,info = &flash_info[0];
|
|
(bank < CONFIG_SYS_MAX_FLASH_BANKS) && (addr_first <= addr_last);
|
|
++bank, ++info) {
|
|
ulong b_end;
|
|
int sect;
|
|
short s_end;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
continue;
|
|
}
|
|
|
|
b_end = info->start[0] + info->size - 1; /* bank end addr */
|
|
s_end = info->sector_count - 1; /* last sector */
|
|
|
|
|
|
for (sect=0; sect < info->sector_count; ++sect) {
|
|
ulong end; /* last address in current sect */
|
|
|
|
end = (sect == s_end) ? b_end : info->start[sect + 1] - 1;
|
|
|
|
if (addr_first > end)
|
|
continue;
|
|
if (addr_last < info->start[sect])
|
|
continue;
|
|
|
|
if (addr_first == info->start[sect]) {
|
|
s_first[bank] = sect;
|
|
}
|
|
if (addr_last == end) {
|
|
s_last[bank] = sect;
|
|
}
|
|
}
|
|
if (s_first[bank] >= 0) {
|
|
if (s_last[bank] < 0) {
|
|
if (addr_last > b_end) {
|
|
s_last[bank] = s_end;
|
|
} else {
|
|
puts ("Error: end address"
|
|
" not on sector boundary\n");
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (s_last[bank] < s_first[bank]) {
|
|
puts ("Error: end sector"
|
|
" precedes start sector\n");
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
sect = s_last[bank];
|
|
addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
|
|
(*s_count) += s_last[bank] - s_first[bank] + 1;
|
|
} else if (addr_first >= info->start[0] && addr_first < b_end) {
|
|
puts ("Error: start address not on sector boundary\n");
|
|
rcode = 1;
|
|
break;
|
|
} else if (s_last[bank] >= 0) {
|
|
puts ("Error: cannot span across banks when they are"
|
|
" mapped in reverse order\n");
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rcode;
|
|
}
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
|
|
int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
ulong bank;
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
dataflash_print_info();
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
if (argc == 1) { /* print info for all FLASH banks */
|
|
for (bank=0; bank <CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
|
|
printf ("\nBank # %ld: ", bank+1);
|
|
|
|
flash_print_info (&flash_info[bank]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
bank = simple_strtoul(argv[1], NULL, 16);
|
|
if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
|
|
printf ("Only FLASH Banks # 1 ... # %d supported\n",
|
|
CONFIG_SYS_MAX_FLASH_BANKS);
|
|
return 1;
|
|
}
|
|
printf ("\nBank # %ld: ", bank);
|
|
flash_print_info (&flash_info[bank-1]);
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
return 0;
|
|
}
|
|
|
|
int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
flash_info_t *info;
|
|
ulong bank, addr_first, addr_last;
|
|
int n, sect_first, sect_last;
|
|
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
|
|
struct mtd_device *dev;
|
|
struct part_info *part;
|
|
u8 dev_type, dev_num, pnum;
|
|
#endif
|
|
int rcode = 0;
|
|
|
|
if (argc < 2) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
if (strcmp(argv[1], "all") == 0) {
|
|
for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
|
|
printf ("Erase Flash Bank # %ld ", bank);
|
|
info = &flash_info[bank-1];
|
|
rcode = flash_erase (info, 0, info->sector_count-1);
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
if ((n = abbrev_spec(argv[1], &info, §_first, §_last)) != 0) {
|
|
if (n < 0) {
|
|
puts ("Bad sector specification\n");
|
|
return 1;
|
|
}
|
|
printf ("Erase Flash Sectors %d-%d in Bank # %zu ",
|
|
sect_first, sect_last, (info-flash_info)+1);
|
|
rcode = flash_erase(info, sect_first, sect_last);
|
|
return rcode;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
|
|
/* erase <part-id> - erase partition */
|
|
if ((argc == 2) && (mtd_id_parse(argv[1], NULL, &dev_type, &dev_num) == 0)) {
|
|
mtdparts_init();
|
|
if (find_dev_and_part(argv[1], &dev, &pnum, &part) == 0) {
|
|
if (dev->id->type == MTD_DEV_TYPE_NOR) {
|
|
bank = dev->id->num;
|
|
info = &flash_info[bank];
|
|
addr_first = part->offset + info->start[0];
|
|
addr_last = addr_first + part->size - 1;
|
|
|
|
printf ("Erase Flash Partition %s, "
|
|
"bank %ld, 0x%08lx - 0x%08lx ",
|
|
argv[1], bank, addr_first,
|
|
addr_last);
|
|
|
|
rcode = flash_sect_erase(addr_first, addr_last);
|
|
return rcode;
|
|
}
|
|
|
|
printf("cannot erase, not a NOR device\n");
|
|
return 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (argc != 3) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
if (strcmp(argv[1], "bank") == 0) {
|
|
bank = simple_strtoul(argv[2], NULL, 16);
|
|
if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
|
|
printf ("Only FLASH Banks # 1 ... # %d supported\n",
|
|
CONFIG_SYS_MAX_FLASH_BANKS);
|
|
return 1;
|
|
}
|
|
printf ("Erase Flash Bank # %ld ", bank);
|
|
info = &flash_info[bank-1];
|
|
rcode = flash_erase (info, 0, info->sector_count-1);
|
|
return rcode;
|
|
}
|
|
|
|
if (addr_spec(argv[1], argv[2], &addr_first, &addr_last) < 0){
|
|
printf ("Bad address format\n");
|
|
return 1;
|
|
}
|
|
|
|
if (addr_first >= addr_last) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
rcode = flash_sect_erase(addr_first, addr_last);
|
|
return rcode;
|
|
#else
|
|
return 0;
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
int flash_sect_erase (ulong addr_first, ulong addr_last)
|
|
{
|
|
flash_info_t *info;
|
|
ulong bank;
|
|
#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
|
|
int s_first[CONFIG_SYS_MAX_FLASH_BANKS_DETECT], s_last[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
|
|
#else
|
|
int s_first[CONFIG_SYS_MAX_FLASH_BANKS], s_last[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
#endif
|
|
int erased = 0;
|
|
int planned;
|
|
int rcode = 0;
|
|
|
|
rcode = flash_fill_sect_ranges (addr_first, addr_last,
|
|
s_first, s_last, &planned );
|
|
|
|
if (planned && (rcode == 0)) {
|
|
for (bank=0,info = &flash_info[0];
|
|
(bank < CONFIG_SYS_MAX_FLASH_BANKS) && (rcode == 0);
|
|
++bank, ++info) {
|
|
if (s_first[bank]>=0) {
|
|
erased += s_last[bank] - s_first[bank] + 1;
|
|
debug ("Erase Flash from 0x%08lx to 0x%08lx "
|
|
"in Bank # %ld ",
|
|
info->start[s_first[bank]],
|
|
(s_last[bank] == info->sector_count) ?
|
|
info->start[0] + info->size - 1:
|
|
info->start[s_last[bank]+1] - 1,
|
|
bank+1);
|
|
rcode = flash_erase (info, s_first[bank], s_last[bank]);
|
|
}
|
|
}
|
|
printf ("Erased %d sectors\n", erased);
|
|
} else if (rcode == 0) {
|
|
puts ("Error: start and/or end address"
|
|
" not on sector boundary\n");
|
|
rcode = 1;
|
|
}
|
|
return rcode;
|
|
}
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
|
|
int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
flash_info_t *info;
|
|
ulong bank;
|
|
int i, n, sect_first, sect_last;
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
#if !defined(CONFIG_SYS_NO_FLASH) || defined(CONFIG_HAS_DATAFLASH)
|
|
ulong addr_first, addr_last;
|
|
#endif
|
|
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
|
|
struct mtd_device *dev;
|
|
struct part_info *part;
|
|
u8 dev_type, dev_num, pnum;
|
|
#endif
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
int status;
|
|
#endif
|
|
int p;
|
|
int rcode = 0;
|
|
|
|
if (argc < 3) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
if (strcmp(argv[1], "off") == 0) {
|
|
p = 0;
|
|
} else if (strcmp(argv[1], "on") == 0) {
|
|
p = 1;
|
|
} else {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
if ((strcmp(argv[2], "all") != 0) && (strcmp(argv[2], "bank") != 0)) {
|
|
addr_first = simple_strtoul(argv[2], NULL, 16);
|
|
addr_last = simple_strtoul(argv[3], NULL, 16);
|
|
|
|
if (addr_dataflash(addr_first) && addr_dataflash(addr_last)) {
|
|
status = dataflash_real_protect(p,addr_first,addr_last);
|
|
if (status < 0){
|
|
puts ("Bad DataFlash sector specification\n");
|
|
return 1;
|
|
}
|
|
printf("%sProtect %d DataFlash Sectors\n",
|
|
p ? "" : "Un-", status);
|
|
return 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
if (strcmp(argv[2], "all") == 0) {
|
|
for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
|
|
info = &flash_info[bank-1];
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
continue;
|
|
}
|
|
printf ("%sProtect Flash Bank # %ld\n",
|
|
p ? "" : "Un-", bank);
|
|
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (flash_real_protect(info, i, p))
|
|
rcode = 1;
|
|
putc ('.');
|
|
#else
|
|
info->protect[i] = p;
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
}
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (!rcode) puts (" done\n");
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
if ((n = abbrev_spec(argv[2], &info, §_first, §_last)) != 0) {
|
|
if (n < 0) {
|
|
puts ("Bad sector specification\n");
|
|
return 1;
|
|
}
|
|
printf("%sProtect Flash Sectors %d-%d in Bank # %zu\n",
|
|
p ? "" : "Un-", sect_first, sect_last,
|
|
(info-flash_info)+1);
|
|
for (i = sect_first; i <= sect_last; i++) {
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (flash_real_protect(info, i, p))
|
|
rcode = 1;
|
|
putc ('.');
|
|
#else
|
|
info->protect[i] = p;
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (!rcode) puts (" done\n");
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
|
|
return rcode;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
|
|
/* protect on/off <part-id> */
|
|
if ((argc == 3) && (mtd_id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
|
|
mtdparts_init();
|
|
if (find_dev_and_part(argv[2], &dev, &pnum, &part) == 0) {
|
|
if (dev->id->type == MTD_DEV_TYPE_NOR) {
|
|
bank = dev->id->num;
|
|
info = &flash_info[bank];
|
|
addr_first = part->offset + info->start[0];
|
|
addr_last = addr_first + part->size - 1;
|
|
|
|
printf ("%sProtect Flash Partition %s, "
|
|
"bank %ld, 0x%08lx - 0x%08lx\n",
|
|
p ? "" : "Un", argv[1],
|
|
bank, addr_first, addr_last);
|
|
|
|
rcode = flash_sect_protect (p, addr_first, addr_last);
|
|
return rcode;
|
|
}
|
|
|
|
printf("cannot %sprotect, not a NOR device\n",
|
|
p ? "" : "un");
|
|
return 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (argc != 4) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
if (strcmp(argv[2], "bank") == 0) {
|
|
bank = simple_strtoul(argv[3], NULL, 16);
|
|
if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
|
|
printf ("Only FLASH Banks # 1 ... # %d supported\n",
|
|
CONFIG_SYS_MAX_FLASH_BANKS);
|
|
return 1;
|
|
}
|
|
printf ("%sProtect Flash Bank # %ld\n",
|
|
p ? "" : "Un-", bank);
|
|
info = &flash_info[bank-1];
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
puts ("missing or unknown FLASH type\n");
|
|
return 1;
|
|
}
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (flash_real_protect(info, i, p))
|
|
rcode = 1;
|
|
putc ('.');
|
|
#else
|
|
info->protect[i] = p;
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (!rcode) puts (" done\n");
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
|
|
return rcode;
|
|
}
|
|
|
|
if (addr_spec(argv[2], argv[3], &addr_first, &addr_last) < 0){
|
|
printf("Bad address format\n");
|
|
return 1;
|
|
}
|
|
|
|
if (addr_first >= addr_last) {
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
rcode = flash_sect_protect (p, addr_first, addr_last);
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
return rcode;
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
|
|
{
|
|
flash_info_t *info;
|
|
ulong bank;
|
|
#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
|
|
int s_first[CONFIG_SYS_MAX_FLASH_BANKS_DETECT], s_last[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
|
|
#else
|
|
int s_first[CONFIG_SYS_MAX_FLASH_BANKS], s_last[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
#endif
|
|
int protected, i;
|
|
int planned;
|
|
int rcode;
|
|
|
|
rcode = flash_fill_sect_ranges( addr_first, addr_last, s_first, s_last, &planned );
|
|
|
|
protected = 0;
|
|
|
|
if (planned && (rcode == 0)) {
|
|
for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
continue;
|
|
}
|
|
|
|
if (s_first[bank]>=0 && s_first[bank]<=s_last[bank]) {
|
|
debug ("%sProtecting sectors %d..%d in bank %ld\n",
|
|
p ? "" : "Un-",
|
|
s_first[bank], s_last[bank], bank+1);
|
|
protected += s_last[bank] - s_first[bank] + 1;
|
|
for (i=s_first[bank]; i<=s_last[bank]; ++i) {
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
if (flash_real_protect(info, i, p))
|
|
rcode = 1;
|
|
putc ('.');
|
|
#else
|
|
info->protect[i] = p;
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
}
|
|
}
|
|
}
|
|
#if defined(CONFIG_SYS_FLASH_PROTECTION)
|
|
puts (" done\n");
|
|
#endif /* CONFIG_SYS_FLASH_PROTECTION */
|
|
|
|
printf ("%sProtected %d sectors\n",
|
|
p ? "" : "Un-", protected);
|
|
} else if (rcode == 0) {
|
|
puts ("Error: start and/or end address"
|
|
" not on sector boundary\n");
|
|
rcode = 1;
|
|
}
|
|
return rcode;
|
|
}
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
|
|
|
|
/**************************************************/
|
|
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
|
|
# define TMP_ERASE "erase <part-id>\n - erase partition\n"
|
|
# define TMP_PROT_ON "protect on <part-id>\n - protect partition\n"
|
|
# define TMP_PROT_OFF "protect off <part-id>\n - make partition writable\n"
|
|
#else
|
|
# define TMP_ERASE /* empty */
|
|
# define TMP_PROT_ON /* empty */
|
|
# define TMP_PROT_OFF /* empty */
|
|
#endif
|
|
|
|
U_BOOT_CMD(
|
|
flinfo, 2, 1, do_flinfo,
|
|
"print FLASH memory information",
|
|
"\n - print information for all FLASH memory banks\n"
|
|
"flinfo N\n - print information for FLASH memory bank # N"
|
|
);
|
|
|
|
U_BOOT_CMD(
|
|
erase, 3, 0, do_flerase,
|
|
"erase FLASH memory",
|
|
"start end\n"
|
|
" - erase FLASH from addr 'start' to addr 'end'\n"
|
|
"erase start +len\n"
|
|
" - erase FLASH from addr 'start' to the end of sect "
|
|
"w/addr 'start'+'len'-1\n"
|
|
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
|
|
"erase bank N\n - erase FLASH bank # N\n"
|
|
TMP_ERASE
|
|
"erase all\n - erase all FLASH banks"
|
|
);
|
|
|
|
U_BOOT_CMD(
|
|
protect, 4, 0, do_protect,
|
|
"enable or disable FLASH write protection",
|
|
"on start end\n"
|
|
" - protect FLASH from addr 'start' to addr 'end'\n"
|
|
"protect on start +len\n"
|
|
" - protect FLASH from addr 'start' to end of sect "
|
|
"w/addr 'start'+'len'-1\n"
|
|
"protect on N:SF[-SL]\n"
|
|
" - protect sectors SF-SL in FLASH bank # N\n"
|
|
"protect on bank N\n - protect FLASH bank # N\n"
|
|
TMP_PROT_ON
|
|
"protect on all\n - protect all FLASH banks\n"
|
|
"protect off start end\n"
|
|
" - make FLASH from addr 'start' to addr 'end' writable\n"
|
|
"protect off start +len\n"
|
|
" - make FLASH from addr 'start' to end of sect "
|
|
"w/addr 'start'+'len'-1 wrtable\n"
|
|
"protect off N:SF[-SL]\n"
|
|
" - make sectors SF-SL writable in FLASH bank # N\n"
|
|
"protect off bank N\n - make FLASH bank # N writable\n"
|
|
TMP_PROT_OFF
|
|
"protect off all\n - make all FLASH banks writable"
|
|
);
|
|
|
|
#undef TMP_ERASE
|
|
#undef TMP_PROT_ON
|
|
#undef TMP_PROT_OFF
|