189 lines
5.7 KiB
C
189 lines
5.7 KiB
C
/*
|
|
* Copyright (c) 2009 Wind River Systems, Inc.
|
|
* Tom Rix <Tom.Rix@windriver.com>
|
|
*
|
|
* This is file is based on
|
|
* repository git.gitorious.org/u-boot-omap3/mainline.git,
|
|
* branch omap3-dev-usb, file drivers/usb/gadget/twl4030_usb.c
|
|
*
|
|
* This is the unique part of its copyright :
|
|
*
|
|
* ------------------------------------------------------------------------
|
|
*
|
|
* * (C) Copyright 2009 Atin Malaviya (atin.malaviya@gmail.com)
|
|
*
|
|
* Based on: twl4030_usb.c in linux 2.6 (drivers/i2c/chips/twl4030_usb.c)
|
|
* Copyright (C) 2004-2007 Texas Instruments
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
|
|
*
|
|
* Author: Atin Malaviya (atin.malaviya@gmail.com)
|
|
*
|
|
* ------------------------------------------------------------------------
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <twl4030.h>
|
|
|
|
/* Defines for bits in registers */
|
|
#define OPMODE_MASK (3 << 3)
|
|
#define XCVRSELECT_MASK (3 << 0)
|
|
#define CARKITMODE (1 << 2)
|
|
#define OTG_ENAB (1 << 5)
|
|
#define PHYPWD (1 << 0)
|
|
#define CLOCKGATING_EN (1 << 2)
|
|
#define CLK32K_EN (1 << 1)
|
|
#define REQ_PHY_DPLL_CLK (1 << 0)
|
|
#define PHY_DPLL_CLK (1 << 0)
|
|
|
|
static int twl4030_usb_write(u8 address, u8 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, data, address);
|
|
if (ret != 0)
|
|
printf("TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int twl4030_usb_read(u8 address)
|
|
{
|
|
u8 data;
|
|
int ret;
|
|
|
|
ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, &data, address);
|
|
if (ret == 0)
|
|
ret = data;
|
|
else
|
|
printf("TWL4030:USB:Read[0x%x] Error %d\n", address, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void twl4030_usb_ldo_init(void)
|
|
{
|
|
/* Enable writing to power configuration registers */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0xC0,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x0C,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
|
|
/* put VUSB3V1 LDO in active state */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
|
|
TWL4030_PM_RECEIVER_VUSB_DEDICATED2);
|
|
|
|
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x14,
|
|
TWL4030_PM_RECEIVER_VUSB_DEDICATED1);
|
|
|
|
/* turn on 3.1V regulator */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
|
|
TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP);
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
|
|
TWL4030_PM_RECEIVER_VUSB3V1_TYPE);
|
|
|
|
/* turn on 1.5V regulator */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
|
|
TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP);
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
|
|
TWL4030_PM_RECEIVER_VUSB1V5_TYPE);
|
|
|
|
/* turn on 1.8V regulator */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
|
|
TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP);
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
|
|
TWL4030_PM_RECEIVER_VUSB1V8_TYPE);
|
|
|
|
/* disable access to power configuration registers */
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x00,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
}
|
|
|
|
static void twl4030_phy_power(void)
|
|
{
|
|
u8 pwr, clk;
|
|
|
|
/* Power the PHY */
|
|
pwr = twl4030_usb_read(TWL4030_USB_PHY_PWR_CTRL);
|
|
pwr &= ~PHYPWD;
|
|
twl4030_usb_write(TWL4030_USB_PHY_PWR_CTRL, pwr);
|
|
/* Enable clocks */
|
|
clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL);
|
|
clk |= CLOCKGATING_EN | CLK32K_EN;
|
|
twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk);
|
|
}
|
|
|
|
/*
|
|
* Initiaze the ULPI interface
|
|
* ULPI : Universal Transceiver Macrocell Low Pin Interface
|
|
* An interface between the USB link controller like musb and the
|
|
* the PHY or transceiver that drives the actual bus.
|
|
*/
|
|
int twl4030_usb_ulpi_init(void)
|
|
{
|
|
long timeout = 1000 * 1000; /* 1 sec */;
|
|
u8 clk, sts, pwr;
|
|
|
|
/* twl4030 ldo init */
|
|
twl4030_usb_ldo_init();
|
|
|
|
/* Enable the twl4030 phy */
|
|
twl4030_phy_power();
|
|
|
|
/* Enable DPLL to access PHY registers over I2C */
|
|
clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL);
|
|
clk |= REQ_PHY_DPLL_CLK;
|
|
twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk);
|
|
|
|
/* Check if the PHY DPLL is locked */
|
|
sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS);
|
|
while (!(sts & PHY_DPLL_CLK) && 0 < timeout) {
|
|
udelay(10);
|
|
sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS);
|
|
timeout -= 10;
|
|
}
|
|
|
|
/* Final check */
|
|
sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS);
|
|
if (!(sts & PHY_DPLL_CLK)) {
|
|
printf("Error:TWL4030:USB Timeout setting PHY DPLL clock\n");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* There are two circuit blocks attached to the PHY,
|
|
* Carkit and USB OTG. Disable Carkit and enable USB OTG
|
|
*/
|
|
twl4030_usb_write(TWL4030_USB_IFC_CTRL_CLR, CARKITMODE);
|
|
pwr = twl4030_usb_read(TWL4030_USB_POWER_CTRL);
|
|
pwr |= OTG_ENAB;
|
|
twl4030_usb_write(TWL4030_USB_POWER_CTRL_SET, pwr);
|
|
|
|
/* Clear the opmode bits to ensure normal encode */
|
|
twl4030_usb_write(TWL4030_USB_FUNC_CTRL_CLR, OPMODE_MASK);
|
|
|
|
/* Clear the xcvrselect bits to enable the high speed transeiver */
|
|
twl4030_usb_write(TWL4030_USB_FUNC_CTRL_CLR, XCVRSELECT_MASK);
|
|
|
|
/* Let ULPI control the DPLL clock */
|
|
clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL);
|
|
clk &= ~REQ_PHY_DPLL_CLK;
|
|
twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk);
|
|
|
|
return 0;
|
|
}
|