588 lines
9.2 KiB
Text
588 lines
9.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Device Tree file for the Guntermann & Drunck ControlCenter-Compact board
|
|
*
|
|
* Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
|
|
*
|
|
* based on the Device Tree file for Marvell Armada 388 evaluation board
|
|
* (DB-88F6820), which is
|
|
*
|
|
* Copyright (C) 2014 Marvell
|
|
*
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "armada-388.dtsi"
|
|
|
|
&gpio0 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&gpio1 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&uart0 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&uart1 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
/ {
|
|
model = "Controlcenter Digital Compact";
|
|
compatible = "marvell,a385-db", "marvell,armada388",
|
|
"marvell,armada385", "marvell,armada380";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS1,115200 earlyprintk";
|
|
stdout-path = "/soc/internal-regs/serial@12100";
|
|
};
|
|
|
|
aliases {
|
|
ethernet0 = ð0;
|
|
ethernet2 = ð2;
|
|
mdio-gpio0 = &MDIO0;
|
|
mdio-gpio1 = &MDIO1;
|
|
mdio-gpio2 = &MDIO2;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
i2c0 = &I2C0;
|
|
i2c1 = &I2C1;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
clocks {
|
|
sc16isclk: sc16isclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <11059200>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
|
|
|
|
internal-regs {
|
|
spi0: spi@10600 {
|
|
status = "okay";
|
|
sc16is741: sc16is741@0 {
|
|
compatible = "nxp,sc16is741";
|
|
reg = <0>;
|
|
clocks = <&sc16isclk>;
|
|
spi-max-frequency = <4000000>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "n25q016a", "spi-flash";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <108000000>;
|
|
};
|
|
spi-flash@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "n25q128a11", "spi-flash";
|
|
reg = <1>; /* Chip select 1 */
|
|
spi-max-frequency = <108000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
I2C0: i2c@11000 {
|
|
status = "okay";
|
|
clock-frequency = <1000000>;
|
|
u-boot,dm-pre-reloc;
|
|
PCA21: pca9698@21 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x21>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA22: pca9698@22 {
|
|
compatible = "nxp,pca9698";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x22>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA23: pca9698@23 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x23>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA24: pca9698@24 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x24>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA25: pca9698@25 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x25>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA26: pca9698@26 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x26>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
I2C1: i2c@11100 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
at97sc3205t@29 {
|
|
compatible = "atmel,at97sc3204t";
|
|
reg = <0x29>;
|
|
u-boot,i2c-offset-len = <0>;
|
|
};
|
|
emc2305@2d {
|
|
compatible = "smsc,emc2305";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2d>;
|
|
fan@0 {
|
|
reg = <0>;
|
|
};
|
|
fan@1 {
|
|
reg = <1>;
|
|
};
|
|
fan@2 {
|
|
reg = <2>;
|
|
};
|
|
fan@3 {
|
|
reg = <3>;
|
|
};
|
|
fan@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
lm77@48 {
|
|
compatible = "national,lm77";
|
|
reg = <0x48>;
|
|
};
|
|
ads1015@49 {
|
|
compatible = "ti,ads1015";
|
|
reg = <0x49>;
|
|
};
|
|
lm77@4a {
|
|
compatible = "national,lm77";
|
|
reg = <0x4a>;
|
|
};
|
|
ads1015@4b {
|
|
compatible = "ti,ads1015";
|
|
reg = <0x4b>;
|
|
};
|
|
emc2305@4c {
|
|
compatible = "smsc,emc2305";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x4c>;
|
|
fan@0 {
|
|
reg = <0>;
|
|
};
|
|
fan@1 {
|
|
reg = <1>;
|
|
};
|
|
fan@2 {
|
|
reg = <2>;
|
|
};
|
|
fan@3 {
|
|
reg = <3>;
|
|
};
|
|
fan@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
at24c512@54 {
|
|
compatible = "atmel,24c512";
|
|
reg = <0x54>;
|
|
u-boot,i2c-offset-len = <2>;
|
|
};
|
|
ds1339@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@12100 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@34000 {
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "sgmii";
|
|
};
|
|
|
|
usb@58000 {
|
|
status = "ok";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "sgmii";
|
|
};
|
|
|
|
mdio@72004 {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
sata@a8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
broken-cd;
|
|
wp-inverted;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
no-1-8-v;
|
|
};
|
|
|
|
usb3@f0000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
/*
|
|
* The two PCIe units are accessible through
|
|
* standard PCIe slots on the board.
|
|
*/
|
|
pcie@3,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
MDIO0: mdio0 {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = < /*MDC*/ &gpio0 13 0
|
|
/*MDIO*/ &gpio0 14 0>;
|
|
mv88e1240@0 {
|
|
reg = <0x0>;
|
|
};
|
|
mv88e1240@1 {
|
|
reg = <0x1>;
|
|
};
|
|
mv88e1240@2 {
|
|
reg = <0x2>;
|
|
};
|
|
mv88e1240@3 {
|
|
reg = <0x3>;
|
|
};
|
|
mv88e1240@4 {
|
|
reg = <0x4>;
|
|
};
|
|
mv88e1240@5 {
|
|
reg = <0x5>;
|
|
};
|
|
mv88e1240@6 {
|
|
reg = <0x6>;
|
|
};
|
|
mv88e1240@7 {
|
|
reg = <0x7>;
|
|
};
|
|
mv88e1240@8 {
|
|
reg = <0x8>;
|
|
};
|
|
mv88e1240@9 {
|
|
reg = <0x9>;
|
|
};
|
|
mv88e1240@a {
|
|
reg = <0xa>;
|
|
};
|
|
mv88e1240@b {
|
|
reg = <0xb>;
|
|
};
|
|
mv88e1240@c {
|
|
reg = <0xc>;
|
|
};
|
|
mv88e1240@d {
|
|
reg = <0xd>;
|
|
};
|
|
mv88e1240@e {
|
|
reg = <0xe>;
|
|
};
|
|
mv88e1240@f {
|
|
reg = <0xf>;
|
|
};
|
|
mv88e1240@10 {
|
|
reg = <0x10>;
|
|
};
|
|
mv88e1240@11 {
|
|
reg = <0x11>;
|
|
};
|
|
mv88e1240@12 {
|
|
reg = <0x12>;
|
|
};
|
|
mv88e1240@13 {
|
|
reg = <0x13>;
|
|
};
|
|
mv88e1240@14 {
|
|
reg = <0x14>;
|
|
};
|
|
mv88e1240@15 {
|
|
reg = <0x15>;
|
|
};
|
|
mv88e1240@16 {
|
|
reg = <0x16>;
|
|
};
|
|
mv88e1240@17 {
|
|
reg = <0x17>;
|
|
};
|
|
mv88e1240@18 {
|
|
reg = <0x18>;
|
|
};
|
|
mv88e1240@19 {
|
|
reg = <0x19>;
|
|
};
|
|
mv88e1240@1a {
|
|
reg = <0x1a>;
|
|
};
|
|
mv88e1240@1b {
|
|
reg = <0x1b>;
|
|
};
|
|
mv88e1240@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
mv88e1240@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
mv88e1240@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
mv88e1240@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
MDIO1: mdio1 {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = < /*MDC*/ &gpio0 25 0
|
|
/*MDIO*/ &gpio1 13 0>;
|
|
mv88e1240@0 {
|
|
reg = <0x0>;
|
|
};
|
|
mv88e1240@1 {
|
|
reg = <0x1>;
|
|
};
|
|
mv88e1240@2 {
|
|
reg = <0x2>;
|
|
};
|
|
mv88e1240@3 {
|
|
reg = <0x3>;
|
|
};
|
|
mv88e1240@4 {
|
|
reg = <0x4>;
|
|
};
|
|
mv88e1240@5 {
|
|
reg = <0x5>;
|
|
};
|
|
mv88e1240@6 {
|
|
reg = <0x6>;
|
|
};
|
|
mv88e1240@7 {
|
|
reg = <0x7>;
|
|
};
|
|
mv88e1240@8 {
|
|
reg = <0x8>;
|
|
};
|
|
mv88e1240@9 {
|
|
reg = <0x9>;
|
|
};
|
|
mv88e1240@a {
|
|
reg = <0xa>;
|
|
};
|
|
mv88e1240@b {
|
|
reg = <0xb>;
|
|
};
|
|
mv88e1240@c {
|
|
reg = <0xc>;
|
|
};
|
|
mv88e1240@d {
|
|
reg = <0xd>;
|
|
};
|
|
mv88e1240@e {
|
|
reg = <0xe>;
|
|
};
|
|
mv88e1240@f {
|
|
reg = <0xf>;
|
|
};
|
|
mv88e1240@10 {
|
|
reg = <0x10>;
|
|
};
|
|
mv88e1240@11 {
|
|
reg = <0x11>;
|
|
};
|
|
mv88e1240@12 {
|
|
reg = <0x12>;
|
|
};
|
|
mv88e1240@13 {
|
|
reg = <0x13>;
|
|
};
|
|
mv88e1240@14 {
|
|
reg = <0x14>;
|
|
};
|
|
mv88e1240@15 {
|
|
reg = <0x15>;
|
|
};
|
|
mv88e1240@16 {
|
|
reg = <0x16>;
|
|
};
|
|
mv88e1240@17 {
|
|
reg = <0x17>;
|
|
};
|
|
mv88e1240@18 {
|
|
reg = <0x18>;
|
|
};
|
|
mv88e1240@19 {
|
|
reg = <0x19>;
|
|
};
|
|
mv88e1240@1a {
|
|
reg = <0x1a>;
|
|
};
|
|
mv88e1240@1b {
|
|
reg = <0x1b>;
|
|
};
|
|
mv88e1240@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
mv88e1240@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
mv88e1240@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
mv88e1240@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
MDIO2: mdio2 {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = < /*MDC*/ &gpio1 14 0
|
|
/*MDIO*/ &gpio0 24 0>;
|
|
mv88e1240@0 {
|
|
reg = <0x0>;
|
|
};
|
|
mv88e1240@1 {
|
|
reg = <0x1>;
|
|
};
|
|
mv88e1240@2 {
|
|
reg = <0x2>;
|
|
};
|
|
mv88e1240@3 {
|
|
reg = <0x3>;
|
|
};
|
|
mv88e1240@4 {
|
|
reg = <0x4>;
|
|
};
|
|
mv88e1240@5 {
|
|
reg = <0x5>;
|
|
};
|
|
mv88e1240@6 {
|
|
reg = <0x6>;
|
|
};
|
|
mv88e1240@7 {
|
|
reg = <0x7>;
|
|
};
|
|
mv88e1240@8 {
|
|
reg = <0x8>;
|
|
};
|
|
mv88e1240@9 {
|
|
reg = <0x9>;
|
|
};
|
|
mv88e1240@a {
|
|
reg = <0xa>;
|
|
};
|
|
mv88e1240@b {
|
|
reg = <0xb>;
|
|
};
|
|
mv88e1240@c {
|
|
reg = <0xc>;
|
|
};
|
|
mv88e1240@d {
|
|
reg = <0xd>;
|
|
};
|
|
mv88e1240@e {
|
|
reg = <0xe>;
|
|
};
|
|
mv88e1240@f {
|
|
reg = <0xf>;
|
|
};
|
|
mv88e1240@10 {
|
|
reg = <0x10>;
|
|
};
|
|
mv88e1240@11 {
|
|
reg = <0x11>;
|
|
};
|
|
mv88e1240@12 {
|
|
reg = <0x12>;
|
|
};
|
|
mv88e1240@13 {
|
|
reg = <0x13>;
|
|
};
|
|
mv88e1240@14 {
|
|
reg = <0x14>;
|
|
};
|
|
mv88e1240@15 {
|
|
reg = <0x15>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
finder_led {
|
|
label = "finder-led";
|
|
gpios = <&PCA22 25 0>;
|
|
};
|
|
|
|
status_led {
|
|
label = "status-led";
|
|
gpios = <&gpio0 29 0>;
|
|
};
|
|
};
|
|
};
|