554 lines
11 KiB
Text
554 lines
11 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "meson-axg.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
|
|
model = "Amlogic Meson AXG S400 Development Board";
|
|
|
|
adc_keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 0>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
|
|
button-next {
|
|
label = "Next";
|
|
linux,code = <KEY_NEXT>;
|
|
press-threshold-microvolt = <1116000>; /* 62% */
|
|
};
|
|
|
|
button-prev {
|
|
label = "Previous";
|
|
linux,code = <KEY_PREVIOUS>;
|
|
press-threshold-microvolt = <900000>; /* 50% */
|
|
};
|
|
|
|
button-wifi {
|
|
label = "Wifi";
|
|
linux,code = <KEY_WLAN>;
|
|
press-threshold-microvolt = <684000>; /* 38% */
|
|
};
|
|
|
|
button-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
press-threshold-microvolt = <468000>; /* 26% */
|
|
};
|
|
|
|
button-down {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
press-threshold-microvolt = <252000>; /* 14% */
|
|
};
|
|
|
|
button-voice {
|
|
label = "Voice";
|
|
linux,code = <KEY_VOICECOMMAND>;
|
|
press-threshold-microvolt = <0>; /* 0% */
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &uart_AO;
|
|
serial1 = &uart_A;
|
|
};
|
|
|
|
linein: audio-codec@0 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "everest,es7241";
|
|
VDDA-supply = <&vcc_3v3>;
|
|
VDDP-supply = <&vcc_3v3>;
|
|
VDDD-supply = <&vcc_3v3>;
|
|
status = "okay";
|
|
sound-name-prefix = "Linein";
|
|
};
|
|
|
|
lineout: audio-codec@1 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "everest,es7154";
|
|
VDD-supply = <&vcc_3v3>;
|
|
PVDD-supply = <&vcc_5v>;
|
|
status = "okay";
|
|
sound-name-prefix = "Lineout";
|
|
};
|
|
|
|
spdif_dit: audio-codec@2 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "linux,spdif-dit";
|
|
status = "okay";
|
|
sound-name-prefix = "DIT";
|
|
};
|
|
|
|
dmics: audio-codec@3 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "dmic-codec";
|
|
num-channels = <7>;
|
|
wakeup-delay-ms = <50>;
|
|
status = "okay";
|
|
sound-name-prefix = "MIC";
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x40000000>;
|
|
};
|
|
|
|
main_12v: regulator-main_12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "12V";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_3v3: regulator-vcc_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vddao_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_5v: regulator-vcc_5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&main_12v>;
|
|
|
|
gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vddao_3v3: regulator-vddao_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDAO_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&main_12v>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddio_ao18: regulator-vddio_ao18 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDIO_AO18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vddao_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddio_boot: regulator-vddio_boot {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDIO_BOOT";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vddao_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
usb_pwr: regulator-usb_pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "USB_PWR";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
|
|
clocks = <&wifi32k>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
|
|
speaker-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
aled1 {
|
|
label = "speaker:aled1";
|
|
gpios = <&gpio_speaker 7 0>;
|
|
};
|
|
|
|
aled2 {
|
|
label = "speaker:aled2";
|
|
gpios = <&gpio_speaker 6 0>;
|
|
};
|
|
|
|
aled3 {
|
|
label = "speaker:aled3";
|
|
gpios = <&gpio_speaker 5 0>;
|
|
};
|
|
|
|
aled4 {
|
|
label = "speaker:aled4";
|
|
gpios = <&gpio_speaker 4 0>;
|
|
};
|
|
|
|
aled5 {
|
|
label = "speaker:aled5";
|
|
gpios = <&gpio_speaker 3 0>;
|
|
};
|
|
|
|
aled6 {
|
|
label = "speaker:aled6";
|
|
gpios = <&gpio_speaker 2 0>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "amlogic,axg-sound-card";
|
|
model = "AXG-S400";
|
|
audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
|
|
<&tdmin_lb>, <&tdmout_c>;
|
|
audio-widgets = "Line", "Lineout",
|
|
"Line", "Linein",
|
|
"Speaker", "Speaker1 Left",
|
|
"Speaker", "Speaker1 Right";
|
|
audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
|
|
"SPDIFOUT IN 0", "FRDDR_A OUT 3",
|
|
"TDMOUT_C IN 1", "FRDDR_B OUT 2",
|
|
"SPDIFOUT IN 1", "FRDDR_B OUT 3",
|
|
"TDMOUT_C IN 2", "FRDDR_C OUT 2",
|
|
"SPDIFOUT IN 2", "FRDDR_C OUT 3",
|
|
"TDM_C Playback", "TDMOUT_C OUT",
|
|
"TDMIN_A IN 2", "TDM_C Capture",
|
|
"TDMIN_A IN 5", "TDM_C Loopback",
|
|
"TDMIN_B IN 2", "TDM_C Capture",
|
|
"TDMIN_B IN 5", "TDM_C Loopback",
|
|
"TDMIN_C IN 2", "TDM_C Capture",
|
|
"TDMIN_C IN 5", "TDM_C Loopback",
|
|
"TDMIN_LB IN 2", "TDM_C Loopback",
|
|
"TDMIN_LB IN 5", "TDM_C Capture",
|
|
"TODDR_A IN 0", "TDMIN_A OUT",
|
|
"TODDR_B IN 0", "TDMIN_A OUT",
|
|
"TODDR_C IN 0", "TDMIN_A OUT",
|
|
"TODDR_A IN 1", "TDMIN_B OUT",
|
|
"TODDR_B IN 1", "TDMIN_B OUT",
|
|
"TODDR_C IN 1", "TDMIN_B OUT",
|
|
"TODDR_A IN 2", "TDMIN_C OUT",
|
|
"TODDR_B IN 2", "TDMIN_C OUT",
|
|
"TODDR_C IN 2", "TDMIN_C OUT",
|
|
"TODDR_A IN 4", "PDM Capture",
|
|
"TODDR_B IN 4", "PDM Capture",
|
|
"TODDR_C IN 4", "PDM Capture",
|
|
"TODDR_A IN 6", "TDMIN_LB OUT",
|
|
"TODDR_B IN 6", "TDMIN_LB OUT",
|
|
"TODDR_C IN 6", "TDMIN_LB OUT",
|
|
"Lineout", "Lineout AOUTL",
|
|
"Lineout", "Lineout AOUTR",
|
|
"Speaker1 Left", "SPK1 OUT_A",
|
|
"Speaker1 Left", "SPK1 OUT_B",
|
|
"Speaker1 Right", "SPK1 OUT_C",
|
|
"Speaker1 Right", "SPK1 OUT_D",
|
|
"Linein AINL", "Linein",
|
|
"Linein AINR", "Linein";
|
|
assigned-clocks = <&clkc CLKID_HIFI_PLL>,
|
|
<&clkc CLKID_MPLL0>,
|
|
<&clkc CLKID_MPLL1>;
|
|
assigned-clock-parents = <0>, <0>, <0>;
|
|
assigned-clock-rates = <589824000>,
|
|
<270950400>,
|
|
<393216000>;
|
|
status = "okay";
|
|
|
|
dai-link@0 {
|
|
sound-dai = <&frddr_a>;
|
|
};
|
|
|
|
dai-link@1 {
|
|
sound-dai = <&frddr_b>;
|
|
};
|
|
|
|
dai-link@2 {
|
|
sound-dai = <&frddr_c>;
|
|
};
|
|
|
|
dai-link@3 {
|
|
sound-dai = <&toddr_a>;
|
|
};
|
|
|
|
dai-link@4 {
|
|
sound-dai = <&toddr_b>;
|
|
};
|
|
|
|
dai-link@5 {
|
|
sound-dai = <&toddr_c>;
|
|
};
|
|
|
|
dai-link@6 {
|
|
sound-dai = <&tdmif_c>;
|
|
dai-format = "i2s";
|
|
dai-tdm-slot-tx-mask-2 = <1 1>;
|
|
dai-tdm-slot-rx-mask-1 = <1 1>;
|
|
mclk-fs = <256>;
|
|
|
|
codec@0 {
|
|
sound-dai = <&lineout>;
|
|
};
|
|
|
|
codec@1 {
|
|
sound-dai = <&speaker_amp1>;
|
|
};
|
|
|
|
codec@2 {
|
|
sound-dai = <&linein>;
|
|
};
|
|
|
|
};
|
|
|
|
dai-link@7 {
|
|
sound-dai = <&spdifout>;
|
|
|
|
codec {
|
|
sound-dai = <&spdif_dit>;
|
|
};
|
|
};
|
|
|
|
dai-link@8 {
|
|
sound-dai = <&pdm>;
|
|
|
|
codec {
|
|
sound-dai = <&dmics>;
|
|
};
|
|
};
|
|
};
|
|
|
|
wifi32k: wifi32k {
|
|
compatible = "pwm-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
|
|
};
|
|
};
|
|
|
|
ðmac {
|
|
status = "okay";
|
|
pinctrl-0 = <ð_rgmii_y_pins>;
|
|
pinctrl-names = "default";
|
|
phy-handle = <ð_phy0>;
|
|
phy-mode = "rgmii";
|
|
|
|
mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eth_phy0: ethernet-phy@0 {
|
|
/* Realtek RTL8211F (0x001cc916) */
|
|
reg = <0>;
|
|
eee-broken-1000t;
|
|
};
|
|
};
|
|
};
|
|
|
|
&frddr_a {
|
|
status = "okay";
|
|
};
|
|
|
|
&frddr_b {
|
|
status = "okay";
|
|
};
|
|
|
|
&frddr_c {
|
|
status = "okay";
|
|
};
|
|
|
|
&ir {
|
|
status = "okay";
|
|
pinctrl-0 = <&remote_input_ao_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c1_z_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
speaker_amp1: audio-codec@1b {
|
|
compatible = "ti,tas5707";
|
|
reg = <0x1b>;
|
|
reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
|
|
#sound-dai-cells = <0>;
|
|
AVDD-supply = <&vcc_3v3>;
|
|
DVDD-supply = <&vcc_3v3>;
|
|
PVDD_A-supply = <&main_12v>;
|
|
PVDD_B-supply = <&main_12v>;
|
|
PVDD_C-supply = <&main_12v>;
|
|
PVDD_D-supply = <&main_12v>;
|
|
sound-name-prefix = "SPK1";
|
|
};
|
|
};
|
|
|
|
&i2c_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
gpio_speaker: gpio-controller@1f {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x1f>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
vcc-supply = <&vddao_3v3>;
|
|
};
|
|
};
|
|
|
|
&pdm {
|
|
pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
|
|
<&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm_ab {
|
|
status = "okay";
|
|
pinctrl-0 = <&pwm_a_x20_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vddio_ao18>;
|
|
};
|
|
|
|
/* wifi module */
|
|
&sd_emmc_b {
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-0 = <&sdio_pins>;
|
|
pinctrl-1 = <&sdio_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
max-frequency = <100000000>;
|
|
non-removable;
|
|
disable-wp;
|
|
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
|
vmmc-supply = <&vddao_3v3>;
|
|
vqmmc-supply = <&vddio_boot>;
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
};
|
|
};
|
|
|
|
/* emmc storage */
|
|
&sd_emmc_c {
|
|
status = "disabled";
|
|
pinctrl-0 = <&emmc_pins>;
|
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <8>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <180000000>;
|
|
non-removable;
|
|
disable-wp;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vddio_boot>;
|
|
};
|
|
|
|
&spdifout {
|
|
pinctrl-0 = <&spdif_out_a20_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmif_a {
|
|
pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
|
|
<&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmif_b {
|
|
pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
|
|
<&tdmb_din3_pins>, <&mclk_b_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmif_c {
|
|
pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
|
|
<&tdmc_din1_pins>, <&tdmc_dout2_pins>,
|
|
<&mclk_c_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmin_a {
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmin_b {
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmin_c {
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmin_lb {
|
|
status = "okay";
|
|
};
|
|
|
|
&tdmout_c {
|
|
status = "okay";
|
|
};
|
|
|
|
&toddr_a {
|
|
status = "okay";
|
|
};
|
|
|
|
&toddr_b {
|
|
status = "okay";
|
|
};
|
|
|
|
&toddr_c {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart_A {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&uart_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|