experiment-x/macOS-libvirt-Catalina.xml

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<!--
	macOS libvirt XML configuration.

	Run "virt-xml-validate macOS-libvirt-Catalina.xml" to validate this file.

	To install this file, you may place it at ~/.config/libvirt/qemu/
	and run: virsh define macOS-libvirt.xml.

	This configuration has been tested in Ubuntu 20.04 with stock QEMU-KVM.

	Move/rename images and loader/nvmram files and paths as you wish.

	!!! Don't forget to replace CHANGEME with your values !!!

	Adjust memory and currentMemory to 3145728 if you want only 3 GiB.

	Consider removing some cpu features if your hardware lacks support.

	Replace spice with vnc if you prefer it.

	Current network configuration is a local bridge (192.168.12x.x).
	Change it to if you prefer a public bridge instead:
		Change interface to <interface type='user'>
		and remove the <source bridge='virbr0'/>
		Or use virt-manager to edit this line instead of virsh edit.

	Note: Default configuration caused severe clock problems
	under Fedora 27 w/ i7-5820K. This is because Darwin uses
	tsc (time since last tick) for time, and for me did not
	fall back to rtc in the event of a clock mismatch with
	libvirt's default time source. Therefore we must explicitly
	give the clock a tsc timer for kvm to pass to the guest.
	See comments on the <kvm> and <clock> attributes.
-->
  <name>macOS</name>
  <uuid>2aca0dd6-cec9-4717-9ab2-0b7b13d111c3</uuid>
  <title>macOS</title>
  <memory unit='KiB'>4194304</memory>
  <currentMemory unit='KiB'>4194304</currentMemory>
  <vcpu placement='static'>4</vcpu>
  <os>
    <type arch='x86_64' machine='pc-q35-4.2'>hvm</type>
    <!-- We don't need patched OVMF anymore when using latest OpenCore, stock one is okay -->
    <loader readonly='yes' type='pflash'>/home/CHANGEME/OSX-KVM/OVMF_CODE.fd</loader>
    <nvram>/home/CHANGEME/OSX-KVM/OVMF_VARS-1024x768.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/bin/qemu-system-x86_64</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writeback' io='threads'/>
      <source file='/home/CHANGEME/OSX-KVM/OpenCore/OpenCore.qcow2'/>
      <target dev='sda' bus='sata'/>
      <boot order='2'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writeback' io='threads'/>
      <source file='/home/CHANGEME/OSX-KVM/mac_hdd_ng.img'/>
      <target dev='sdb' bus='sata'/>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    </disk>
    <disk type="file" device="disk">
      <driver name="qemu" type="raw" cache="writeback"/>
      <source file="/home/CHANGEME/OSX-KVM/BaseSystem.img"/>
      <target dev="sdc" bus="sata"/>
      <boot order="3"/>
      <address type="drive" controller="0" bus="0" target="0" unit="2"/>
    </disk>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0xa'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0xb'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/>
    </controller>
    <controller type='pci' index='5' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='5' port='0xc'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/>
    </controller>
    <controller type='pci' index='6' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='6' port='0xd'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/>
    </controller>
    <controller type='pci' index='7' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='7' port='0xe'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x6'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
    </controller>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <!-- Make sure you put your nic in bus 0x0 and slot 0x0y(y is numeric), this will make nic built-in and apple-store work-->
    <interface type="bridge">
      <mac address="52:54:00:e6:85:40"/>
      <source bridge="virbr0"/>
      <model type="vmxnet3"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x00" function="0x0"/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <channel type='unix'>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <graphics type='spice' autoport='yes'>
      <listen type='address'/>
    </graphics>
    <video>
      <model type="vga" vram="65536" heads="1" primary="yes"/>
    </video>
    <!-- If you wanna passthrough GPU, make sure the gfx and audio are in the same bus (like 0x01) but different function (0x00 and 0x01)-->
    <!-- <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x2d' slot='0x00' function='0x0'/>
      </source>
      <rom file='/mnt/disks/backups/BIOS/RX580/Ellesmere.rom'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0' multifunction='on'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x2d' slot='0x00' function='0x1'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x1'/>
    </hostdev> -->
    <!-- If you wanna passthrough onboard audio(like 30:00.4), make sure you put it in bus 0x00 and slot 0x0y(y is numeric), otherwise AppleALC won't recognized it -->
    <!-- <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x30' slot='0x00' function='0x4'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
    </hostdev> -->
    <memballoon model='none'/>
  </devices>
  <!-- Note: Enable the next line when SELinux is enabled -->
  <!-- seclabel type='dynamic' model='selinux' relabel='yes'/> -->
  <qemu:commandline>
    <qemu:arg value='-device'/>
    <qemu:arg value='isa-applesmc,osk=ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-tablet'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Penryn,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check'/>
    <!-- <qemu:arg value='Penryn,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2'/> -->
    <!-- If you wanna use cpu host-passthrough mode, uncomments below-->
    <!-- <qemu:arg value='host,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2'/> -->
    <!-- If you wanna use cpu emulating mode like Skylake-Server, uncomments below-->
    <!-- <qemu:arg value='Skylake-Server,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2'/> -->
  </qemu:commandline>
</domain>